134 ENGEL used machine for sale

Key data: 1200 kN, 186 g/PS, 35 mm

Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision Engel Victory VC 500/120 injection moulding machine. This tie bar-less machine is fitted with the Engel Microprocessor controller and 35mm diameter screw, which gives a shot weight of 186 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machiner ...

Engel Injection Machine Type ES 1500T/160 V – ELAST Stroke slide plate 300mm Stroke central ejector for slide plate 100mm Force central ejector for slide plate 30kN Stroke lateral mechanical ejector 250mm Stroke lateral hydraulic ejector 250mm Force lateral hydraulic ejector 80kN Stroke central ejector 120mm Force central ejector 20kN Pump drive power 15kW Oil filling 1 225 Operating pressure of hydraulic system 250bar Capacity temperature control unit 2x3 kW Total connected load 48kW Dims: 2675mm long x 1350mm wide x 3310mm high Weight: 6900 With instruction manual

Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.

screw size:60 mm closing pressure:3500 kN weight of the machine ca.:25,5 t

Manufacturer: Engel Model: Victory 330H/80L/110 Year of Manufacture: 2008 Type of Machine : Injection Molding Machine.Combi machine for 2-component injection molding (main cylinder is Ø 18mm thermoplastic and L-unit is a Ø 12mm LSR cylinder) Operating hours: 35995h Find more here - / Contact us at -

Manufacturer: Engel Model: 330/75 HL Year of Manufacture: 2002 Type of Machine : Injection Moulding Machine Machine Weight: 5,850 kg Find more here - / Contact us at -

Manufacturer: Engel Model: ES 200/90 HL Year of Manufacture: 1999 Type of Machine : Injection Moulding Machine Machine Weight: 5,900 kg Find more here - / Contact us at -

Manufacturer: Engel Model: e victory 50/50 Year of Manufacture: 2019 Operating Hours: 18,660 Hours Condition: Very good technical condition Technical Details Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 50 Material Injection Unit: Thermoplastics Screw Diameter: 18 mm Drive Injection Unit: Electric Construction: Holmlos Clamping Plate: 450 x 500mm Closing Force: 50to Platen Spacing: 600 mm Drive: Hydraulisch/ Hybrid Tool Weight Max: 600 Kg

Manufacturer: Engel Model: e victory 170/110 Year of Manufacture: 2019 Total Running Hours: 23,838 Hours Condition: Very good technical condition Technical Details Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 170 Material Injection Unit: Thermoplastics Screw Diameter: 25 mm Drive Injection Unit: Electric Construction: Holmlos Clamping Plate: 680 x 740mm Closing Force: 110to Platen Spacing: 800 mm Drive: Hydraulisch/ Hybrid Tool Weight Max: 1600 Kg Automation: Linear Roboter Vipe Find more here - / Contact us at -

Manufacturer: Engel Model: e-motion 170/110 T Year of Manufacture: 2014 Total Running Hours: 6,317 Hours Condition: Very good technical condition Technical Details Drive: Fully Electric Year of Manufacture: 2014 Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 170 Material Injection Unit: Thermoplastics Screw Diameter: 25 and 30mm Drive Injection Unit: Electric Construction: Mit Holme Clamping Plate: 680 x 730mm Closing Force: 110to Platen Spacing: 850 mm Drive: Electric Tool Weight Max: 1600 Kg Linear Roboter Viper Series: Viper 12 Year of Manufacture: 2014 Find more here - / Contact us at -

Manufacturer: Engel Model: Victory 1050/200 Year of Manufacture: 2006 Machine type: Injection Molding Machine Operating hours: 107027 Closing force: 200 t Screw diameter: 55 mm Max. injection volume: 511 cm3 Fixing plate: 860 x 860 mm Machine weight: 12.9 t Find more here - / Contact us at -

Manufacturer: Engel Victory 330/80 Model:Victory 330/80 Year of Manufacture: 2006 Operating hours: 95257 Closing force: 80 t Screw diameter: 40 mm Max. injection volume: 154 cm3 Fixing plate: 670 x 600 mm Machine weight: 5.6 t Find more here - / Contact us at -

Manufacturer: Engel Model: Insert 80H/35 – Vertical Type: Vertical injection moulding machine Year of manufacture: 2007 Operating hours: 22404 Closing force: 35 t Screw diameter: 18 mm Max. injection volume: 25.4 cm3 Fixing plate: D1200 mm / 560 x 430 mm Machine weight: 6.1 t Find more here - / Contact us at -

Manufacturer: Engel Model: Emotion 440/160 Year of Manufacture: 2018 Max. installation height :460 mm • Center support package • Max. closing force :1600 kN Cylinder size: 40 mm • Screw CRN coated • OptiShut backflow preventer • max. spray pressure 1940 bar • Injection volume 55-220 cc Max. injection weight :174 g Operating hours: 33526 h Equipment: • 1 core pull incl. auxiliary unit • Plasticizing cylinder set, highly wear-resistant design • Needle valve nozzle • E-Flomo • IQ weight control • IQ Clamp control • EM 63 interface • separate water and electricity connections Find more here - / Contact us at -

Manufacturer: ENGEL Model: EM 440/150 Year of Manufacture: 2007 Specifications: - Clamping Force: 150 tons - Screw Diameter: 35 mm - Operating Hours: 58,724 Find more here - / Contact us at -

Manufacturer: Engel Model: Victory 1800/ 260 Year of Manufacture: 2008 Specifications: - Clamping Force: 260 tons - Screw Diameter: 60 mm - Operating Hours: 88,266 Find more here - / Contact us at -

Key data: 17000 kN, 120 mm

Key parameters: - Clamping force: 17,000 kN (1,700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Shot volume: up to 7,729 cm³ - Injection pressure: up to 2,300 bar - Injection capacity: up to 1,875 cm³/s - Opening stroke: 2,550 mm - Maximum panel spacing: 3,350 mm - Panel size: 2,420 × 2,170 mm - Drive power: 176 kW - Control: ENGEL CC300 - Control language: English Equipment of the machine: - ENGEL ecodrive servo hydraulics for energy-saving operation - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interface set - Extended tool cooling system - Special design for the automotive industry - Documentation in  ...

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.

Key data: 20000 kN

Angebot/Offer: Engel Duo 17060/2000 Viper Robot 60 approx. 4900h YOC 2021

Key data: 4000 kN, 80 mm

Machine + Viper Robot 12

Key data: 5000 kN

Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h

Key data: 7000 kN, 40 mm

Engel E-DUO 740H/740L/700 combi BJ./YEAR 2017 approx. 3871 hrs/h Machine overview: Clamping force: 7000 kN Screw diameter: 40 mm Screw speed: 300 rpm Dosing stroke: 200 mm Control: Engel CC300 Weight: 22 tons Hours: 3871 hours Features: Electric 6-Station Turntable Electrical quick adjustment for the machine plate stroke Two injection units, each with 3-zone screw (D45 mm) 32 zones for hot runner control Electric plasticizing units Full documentation included Status: Ready for use (used) Hours: 3871 Condition of the machine: Already disassembled Defects or missing parts: No known defects, regularly serviced Technical documentation: Complete and available (can be consulted on site)

Key data: 20000 kN, 135 mm

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

Key data: 4200 kN

Machine in production !1

Engel injection moulding machine old

machine in stock!

Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details.

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2004 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 500 mm Opening travel: 750 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2001 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 550 mm Opening travel: 700 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control