6 COSTARELLI used machine for sale

Costarelli D1300 fully automatic agglomerator, 315 kW drive, was processing LDPE, can be used for film, fibers, fluff, light abd voluminous plastic materials to massive volume reduction., throughput rate around 1 Ton per hour, depending on moisture and material, including : loading conveyor belt, feeding belt, barrel diam.1.300 mm., extraction hopper, screw conveyor, roto-classifier, electric cabinet, 400 V 50/60 Hz, CE compliance certificate, electrical drawings, Users manual, Machine in very good conditions, -------------------------------------------------, watch some videos of similar agglomerators in the attached videos, capacity: 1.200 kg/h, conditions: very good, type: 1.300 mm , Totale power needed for this line: around 500 KVA, including belts, classifier, screws., Including: loading conveyor belt

Costarelli inclined Conveyor Belt, Sturdy and reliable construction, Dimensions 5.300 x 950 mm, adjustable height (now loading 500 - discharging 1.600 mm), 1,5 kw motor, PVC carpet with drive lugs, 800 mm pitch, 200 mm roller diameter, 650 mm sidewall height, Constructed in 2001, very good working conditions, working width: 950 mm wide x 5,3 mt.long, conditions: used, checked, type: inclined

For plastic scraps, in most cases without need to reduce size The offer includes:, STORAGE HORIZONTAL BELT, to grant non-stop feeding, DIAGONAL LOADING BELT, made in sturdy carbon steel with side walls, dragging paddles, PVC carpet, AGGLOMERATOR with barrel Ø1.500 mm.,, length 4300 mm. width 2300 mm. height 5.050 mm. 560 kw , Hp 730 65% used in work Side opening panel for inspection and replacing blades Operator switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam sucking vent 4 kW UNLOADING HOPPER, complete with 200 mm Ø, diagonal auger for agglomerated material 1,5 kW drive., size 1.150 mm. x 2.000 mm. Lower opening for cleaning purposes Operations, upper lid, two inspection windows (one can be o ...

COSTARELLI PLASTIC AGGLOMERATOR USED, RECONDITIONED, for film, fibers, flakes of LDPE LLDPE HDPE PP PA PS EPS, etc, Average output 200-450 kg/h depending on materials and moisture content, Including LOADING BELT with side walls to feed the machine 1.000 mm. diam.steel barrel, complete with vacuum vent prepared to convey steam into an exhausting steam system (not included), sturdy steel rotating and fixed knives on bottom of the barrel, 110 kW, Hp 150 main engine,, side hatch, with safety device, for inspection and knives replacement, Grease lubricating system for motor bearings Control panel Driven discharging hopper 1,5 Hp This machine is offered totally RECONDITIONED, Compliant to CE regulations, You might be interested also in our [ROTO-CLASSIFIER](.germanplast.eu/listings/4115659-roto-classifier), [VERTICAL MIXER](.germanplast.eu/listings?q=VERTICALMIXERS), [BAG FILLING STATION](.ger ...

average output 500 kg/h depending on materials and moisture content,, including : LOADING BELT, 1,4 Kw drive 7,0 mt.lomg x 0,9 mt.wide constructed in sturdy painted steel structure,, side walls,, PVC belt AGGLOMERATOR, 1000 mm. diam.steel barrel with infeed 115 kW, Hp 150 main engine, side door for inspection and knives replacement, replaceable inner lining 400 mm high grease lubricating system for engine bearings oil lubricating station for hub bearings, through automatic pump with oil pressure indicator bearing cooling system through circulating water, 0,75 kW oleodynamic power station electrovalve for closing/opening unloading door Hp 3,0 steam vacuum drive control switchboard and panel appx dimensions: L 3.470 mm.x W 1.500 mm. bent steel structure, electric motor DIAGONAL AUGER, 1,5 Hp drive diam +/-150 mm. – width +/- 1000 mm. – length +/- 1500 mm. – bolted upper cover, de-pre ...

Average output 800-1200 kg/h depending on materials and moisture, HORIZONTAL STORAGE BELT, DIAGONAL LOADING BELT AGGLOMERATOR D1300 Steel barrel diameter 1300 mm. Main motor 250 kw (available with 300 kw motor on request) Replaceable inner steel lining Side door for inspection and blades replacement, Sucking vent for steam extraction Oleodynamic power station 0,75 kw with electrovalve which controls opening of unloading door.water loop cycle for cooling hub bearings belt. Electrical cabinet Dimensions: L mm.3950, W.mm.2.280, H. mm.4652. DISCHARGING HOPPER Diagonal, engine moved auger for material extraction (1,1 kw) Discharging height 830 mm from ground Depressure pipe inspection window safety inner grid Appx dimensions : 1000×1500 mm. Auger diam.180 mm. The line is offered reconditioned. Complete with electrical drawings and user manual. We provide spares+repairs+accessories service al ...