lathes used for sale (3,047)

Center height: approx. 230mm, center width: approx. 1000mm, orbital diameter over bed: approx. 480mm, orbital diameter over support: approx. 200mm, spindle bore: approx. 45mm, spindle speed range: 2000rpm, drive power: 4kW, machine dimensions X/Y/Z: approx. 2400mm/1000mm/1500mm, weight: approx. 1700kg. On-site inspection is possible.

Max. swing diameter over bed: 540mm, max. turning diameter: 240mm, max. machining length: 330mm, traverse path: X/Y: 135mm/350, spindle bore: 40mm, speed: 4400rpm. Tool positions: 12, max. tool size square/round: 19mm/31mm, chuck size: 152mm, traversing speed X/Z: 12/16 m/min. Dimensions X/Y/: approx. 2200mm/1700mm/1700mm, weight: approx. 3600kg, control: GE Fanuc 18T.

Axes: XYZCB (8-axes), max. turning diameter: 250mm, max. turning length: 300mm, bar loader diameter: 65mm, tool system: VDI30/tooth profile, torque: 150Nm, speed: 5000rpm, drive power: 22kW, control: Siemens Sinumerik 840D powerline. Dimensions X/Y/Z: approx. 2430mm/5600mm/2430mm, weight: approx. 13000kg, operating hours: approx. 34624h, spindle hours: approx. 22797h.

Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 210 mm-Inside: Ø 76 mm-Take: short taper 6, cone Ø 105 mm-Dimension: Ø 210 x 65 mm-Weight: 3.5 kg

Swing diameter over bed/bed slide: 480mm/340mm, turning length: 800mm, center distance: 1000mm, swing diameter in the recess: 540mm, spindle bore: 52mm, speed: 1400rpm. Quill taper: MK4, manual quill adjustment: 160mm, upper part displacement: 10mm. Machine dimensions X/Y/Z: approx. 2600mm/1100mm/1350mm, weight: approx. 2300kg. On-site inspection is possible.

A CNC-controlled REM vertical lathe is available. Working diameter: 2500mm-7000mm, working height: 1000mm, control: Siemens 840D. Including driven tools. On-site inspection is possible.

Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier-Tool carriage: support carriage support carrier-Support plate: 265 x 180 mm-Dimensions: see photos-Dimensions: 290/280/H70 mm-Weight: 21.1 kg

A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.

chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate-Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate-Outside: Ø 292 mm-Inside: Ø 22 mm-Hole circle: Ø212/10 mm / Ø108/11 mm-Dimensions total Ø 292 x 23 mm-Weight: 8.2 kg

chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate-Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate-Outside: Ø 250 mm-Inside: Ø 100 mm-Hole circle: Ø180 mm/ M10 / Ø230/10 mm-Dimensions total Ø 250 x 23 mm-Weight: 6.1 kg

A CNC double-spindle lathe Hyundai with a new bar loader Iemca (Bucci) is available. 1) CNC lathe Hyundai HD2200 SY, turning diameter: 300mm, turning length: 610mm, spindle passage: 65mm, speed: 4000rpm, power: 18.5kW, chuck size: 8 inch, counter spindle passage: 52mm, speed: 6000rpm, chuck size: 5 inch, Y-axis: +/-55mm, tool positions: 24, rapid traverse X/Y/Z: 24m/10m/30m/min, operating hours: 3330h, manufactured parts: 44478. 2) Bar loader Iemca (Bucci) Master 865/33/Mp, year of manufacture: 2023, round bar diameter range: 8mm-65mm, hexagonal bars: 7mm-55mm, square bars: 10mm-45mm, bar length range: 800mm-4300mm, remaining piece length with diameter below 65mm min./max.: 110mm/400mm. Documentation available. On-site inspection is possible.

chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate-Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate-Outside: Ø 203 mm-Mount: M70 x 6.5-Hole circle: Ø150 mm / M12 / Ø126/17 mm-Dimensions total Ø 203 x 60 mm-Weight: 6.4 kg

An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible.

Swing diameter over bed/face slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, traverse path X/Z: 220mm/635mm, speed: 5000rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool positions: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4500kg. On-site inspection is possible.

X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 4600mm, width: 1600mm, height: 2700mm, weight: 2.1t, operating hours: 34,536h. With automation FMB Unirobot LR MATE 200iD7L-P2TB, grinding spindle Jäger HF-Spindle, chuck MicroCentric 4-410-3-QC, MARPOSS measuring system with automated dimensional compensation, oil mist filter S400, belt filter Knoll KF110/500, hinged belt conveyor 320 S1 and other accessories. On-site inspection is possible.

Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible.

A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible.

Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Machine bed: in very good condition -Manufacturer: Martin, lead screw lathe type DLZ 502 -Turning length: 2200 mm -Turning Ø over bed: 580 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x steady rests, tool holder, tools see photos -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg

Turning diameter over bed/face slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. speed: 3550rpm, drive power: 35kW, tool positions: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the software of the machine was deleted, whereby some machine parameters were deleted without documentation and automatic operation is currently impossible. Expected to be available from Q1, 2025.

A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible.

Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible.

Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible.

turning diameter: max. 560 mmturning length: 600 mmcontrol: 840D powerline Siemensgreates pass round over bed: 680 mmSwing dia. over traverse guideway: 565 mmcentre distance: 620 mmMain spindle:: turning speed range - main spindle: 20 - 5.000 min/-1power capacity - main spindel: 25 / 37 kWmax. Torque: 390 Nmspindle nose: 170H5 spindle bearing diameter: 120 mmusable bar diameter: 65 mmmax. chucking diameter: 250 mmC-Axis: 0,025° / 360 °Subspindel:: Spindle speed range subspindle: 20 - 7.000 min/-1power capacity - Sub spindle: 25 / 33 kWmax. Torque: 213 Nmspindle bearing diameter: 90 mmspindle bore: 57 mmspindle nose: 140H5 C-Axis: 0,025° / 360 °turret:: number of toolpositions: 12 pos.Number of driven toolspositions: 12 pos.Spindle speed - driven tools: max. 4.500 min -1power capacity - driven tools: 12,2 kWtool taper: VDI 40 DIN 69880Tool dimensions with square shank: 40 mmaxis st ...

turning diameter: max. 300 mmturning length: max. 284 mmcontrol: Fanuc Oi-TD turning diameter over bed: 550 mmchucking diameter: 210 mmspindle nose: A2-6 Main spindle:: Max. rpm: 4.500 min/-1spindle bore: 62 mmbar material dia.: 51 mmspindle bearing diameter: 100 mmpower capacity - main spindel: 11 / 7,5 kWaxis stroke:: travel -x axis: 170 mmtravel -z axis: 335 mmturret:: number of toolpositions: 12 pos.Tool size: Ø25 x Ø40 mmfeeds:: rapid traverse ( X / Y / Z ): 36 / 36 m/minTailstock:: dia. of quill: 60 mmquill stroke: 80 mmtaper of center: MT 4 total power requirement: 25 kVAweight of the machine ca.: 3,2 tdimensions of the machine ca.: 8,5 x 2,5 x 2,0 mDocuments: Chip conveyor: Coolantsystem: Tailstock: parts catcher: Signal-Light: hydraulic system: Three Jaw Chuck: SEOAM CAH-08 collet chuck: HAINBUCH nova Gr. 65 tool setting: bar feeder interface: bar feeder: Breunin ...

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmcenter height over bed: 125 mmcentre distance: 550 mmbed width: 135 mmspindle bore: 26 mmturning speed range - stepless: 50 - 2.000 U/minpower requirement: 750 W3-jaw-chuck diameter: 125 mmtaper in tailstock-quill: MK 2 dia. of quill: 30 mmquill stroke: 70 mmvoltage: 230 Vweight of the machine ca.: 120 kgdimensions of the machine ca.: 1,25 x 0,60 x 0,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4000 mmswing diameter: 5500 mmturning height: 2600 mmturning speeds: 60 U/minmain drive motor: 60 / 75 kWControl: Fanuc 31iA workpiece weight max.: 45 tmilling head speed: 1500 U/minram head dimension: 400 x 400 mmmilling spindle drive: 22/25 kWtotal power requirement: - kWweight of the machine ca.: 140 tdimensions of the machine ca.: 12 x 10 x 9 mequipped with:- CNC control Fanuc 31iA- C-axis (0.001°)- Telescopic covers for the cross rail and column guides- 16-position automatic tool changer- Angular milling head- Chip conveyor- coolant through Spindle- Hydrostatic Bearing for the Main Axis Table- High Precision Roller Bearing- Table Main-axis Motor to Control and Drive the C-Axis- Synchronized 2-motor Drive Control System for Driving W-Axis for Cross Rail Movement- Backlash removal technology available when the C-axis is removed from the system.The data for this ad ...

turning diameter: max. 366 mmturning length: 705 mmcontrol: M 730 BM MAPPS IVgreates pass round over bed: 920 mmSwing dia. over traverse guideway: 742 mmMain spindle:: turning speed range - main spindle: 4.000 min/-1power capacity - main spindel: 18,5 / 15 kWspindle nose: JIS A-8 spindle bearing diameter: 140 mmspindle bore: 91 mmmax. usable bar diameter: 80 mmchucking diameter: 250 mmSubspindel:: Spindle speed range subspindle: 6.000 min/-1power capacity - Sub spindle: 11 / 7,5 kWspindle nose: JIS A2-5 spindle bearing diameter: 85 mmspindle bore: 43 mmmax. usable bar diameter: ( - ) mmchucking diameter: 170 mmaxis stroke:: x-travel: 260 mmz-travel: 795 mmY - Axis: +/-50 mmrapid traverse ( X / Y / Z ): 30 / 10 / 30 m/minturret:: number of toolpositions: 12 pos.tool taper: BMT 60 Schank height for square tool: 25 mmDrill shank diameter: 50 mmturret change time: 0,27 sec.Driven Tool P ...

spindle passage: 65 mmspindle diameter in front bearing: 110 mmnumber of spindle speeds: 5.000 U/minPower: 20/27 KWControl: INDEX C 200-4 travel -x axis: 850 mmtravel -z axis: 260 mmnumber of tapers in turret head: 12 driven tools turning speeds: 6.000 U/minCNC turning and milling center vertical | INDEX - V160C equipped with turret, milling spindle and pallet conveyor system.The machine only has 17.000 hours of Power-On.The machine is in good condition.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: V-160C | V-160 C | V 160 C | V 160CThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpice diameter max.: 90 mmforward bearing diameter: 140 mmTurning speeds mainspindle: 4.200 U/minPower: 35,5 KWControl: INDEX C 200-4 travel -x axis: 1.500 mmtravel -z axis: 340 mmtravel -y axis: 180 mmb-axis: 360 °CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis.Further information:- direct measuring system on X + ZThe machine is in good condition.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: V-300 | V 300The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.