lathes used for sale (3,157)

Horizontal turning machine manufactured in 1999. This DAEWOO EcoTurn 200 features a reliable Fanuc 18 T control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the DAEWOO EcoTurn 200 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1991. This Gildemeister CTX 400 features a reliable EPL 2 control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1993. This Gildemeister CTX 400 is in good condition and fully functional, featuring EPL 2 control. It comes with an extraction hose/pipe connected to the side enclosure. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2000. This DAEWOO Puma 350 features a reliable Fanuc 18T control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the DAEWOO Puma 350 machine we have for sale. Contact us for further details.

This Takamaz XT 6 was manufactured in 2020. It features a maximum turning diameter of Ø180 mm and a maximum turning length of 240 mm. If you are looking to get high-quality turning capabilities, consider the Takamaz XT 6 horizontal turning machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2016. This Citizen MIYANO GN 3200 features a maximum machining diameter of 45 mm and a maximum machining length of 50 mm. It includes a spindle speed range of 8,000 rpm and a slide travel of 180 mm in the X-axis and 200 mm in the Z-axis. If you are looking to get high-quality turning capabilities, consider the Citizen MIYANO GN 3200 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2016. This Takamaz ESL 10 features a robust configuration with optional Fanuc Drives, Spindle Orientation, and a Power Chuck. If you are looking to get high-quality turning capabilities, consider the Takamaz ESL 10 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2017. This Citizen MIYANO VC-03 features a maximum turning diameter of 45 mm and a turning length of 50 mm. It includes a rapid traverse rate of 20 m/min for the X-axis and 30 m/min for the Z-axis, along with a robust spindle speed of up to 8000 min⁻¹. If you are looking to get high-quality turning capabilities, consider the Citizen MIYANO VC-03 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1996. This SPINNER SB-CNC features an X-axis travel of 250 mm and a Z-axis travel of 285 mm. The main spindle operates at a speed of 8,000 U/min. If you are looking to get high-quality turning capabilities, consider the SPINNER SB-CNC machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1996. This MORI SEIKI CL 15 features a Z-axis travel of 371 mm and a spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI CL 15 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2003. This MORI SEIKI CL 1500 T features a Kitagawa power chuck and includes a tailstock, tool measuring system, and tool holders. With production hours of 1523, this machine offers reliable performance for turning applications. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI CL 1500 T machine we have for sale. Contact us for further details.

Two Schütte six-spindle turning machines including one Iemca bar feeder are available. 1) Schütte SF 42, year of manufacture: 1977, number of spindles: 6, max. bar capacity: 42mm, max. longitudinal slide stroke: 125mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 6500mm/1400mm/2200mm, weight: approx. 10000kg. Including pick-off spindle, cams, collets, chip conveyor, oil mist extraction system and Iemca PRA40/33/P bar feeder. 2) Schütte SF 51 DNT, year of manufacture: 1987, max. bar capacity: 51mm, number of spindles: 6, max. turning length: 102mm, max. drilling depth: 102mm, spindle circle diameter: 340mm. Including pick-off spindle, CNC cross slide in position 4, cams, collets, auxiliary coolant pump and chip conveyor. Documentation available. An on-site inspection is possible.

This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced capabilities such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 horizontal turning machine we have for sale. Contact us for further details.

Voltage: 380V, frequency: 50Hz, spindle power: 10hp continuous, 15hp for 30 minutes, amperage of largest motor: 40/60A, KA. DC gradation: 10, control: Mazak MAZATROL T-1, weight: 4.5t, with programming manual. An inspection on site is possible.

Heavy Duty Lathe Seiger SLZ 1200 x 3000with Siemens Sinumerik 810D Cycle Control (Teach-In)The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work.Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors.Working AreaDistance between centers: 3,000 mmSwing diameter over bed: 1,200 mmSwing diameter over cross slide: 850 mmCross slide travel: 620 mmBed width: 750 mmSpindleSpindle nose: DIN 55027 size 11Spindle diameter front bearing: 190 mmSpindle bore: 104 mmSpeed range: 5 – 900 min⁻¹Max. torque: 6,000 NmMai ...

Gildemeister GMX 250S Linear Turning/Milling Center CNC Cover Maho DMG Hersteller [manufacturer]: Gildemeister Deckel Maho DMG Type [ type]: GMX 250S Linear Control [control unit]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[construction year]: 12/2008 the premier class of turning and milling! Important key data of the GMX 250S Linear: • 7 Axis Turn-Mill Center • Main and counter spindle • B-axis up to 240° • Milling spindle up to 12,000 rpm • Tool magazine up to 80 places • Siemens 840D or Heidenhain control • Linear actuators for high dynamics and accuracy • Machining diameter approx. 520–640 mm • Turning length up to approx. 1,185 mm Typical equipment: • Y-axis • Powered tools • Bar feeder • High-pressure cooling • Probes • Chip conveyor • HSK-A63 milling spindle • Sub-spindle for complete machinin ...

Centre height: 350mm, turning diameter: 700mm, spindle bore: 108mm, spindle speed: 13-1,000rpm. An on-site inspection is possible.

Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible.

Horizontal turning machine manufactured in 2006. This Johnford SL60 features a swing over bed of 580 mm and a spindle bore of 76.5 mm. It is equipped with a 12-station tool turret and a high-torque spindle motor capable of speeds up to 3,500 rpm. If you are looking to get high-quality turning capabilities, consider the Johnford SL60 machine we have for sale. Contact us for further details.

This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a bar capacity of 52 mm. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details.

Location: Germany, Baden-Württemberg Southwest Condition: Used Manufacturer: Hardinge Model No.: GT27SP GG-121 Year of Make: 2013 Hours: 59861 Machine name: CNC short lathe Manufacturer: Hardinge Model No.: GT27SP GG-121 Year of Make: 2013 Control: Fanuc 32i A Functionality: fully functional Processing hours: approx. 60,000 hours Technical data Spindle bore: 27 mm Spindle holder: A2-5 Chuck max. 80mm Max. spindle speed: 6,000 min?¹ X-axis: 607 mm Z-axis: 286 mm Coolant system Loading and unloading system FMB MH5LS-SP / 5

Location: Germany, Baden-Württemberg Southwest Condition: Used Manufacturer: Müller Hydraulik Model No.: CL1 Year of Make: 2007 For sale is a powerful HD unit Combiloop CL1-F-30-20-A from 2007. Technical data: Plant type: High pressure unit (HD) Pumped medium: Oil Max. operating pressure: approx. 20–30 bar Flow rate: approx. 20–30 l/min Drive: Electric motor Voltage: 400 V / 50 Hz (three-phase current) Control: integrated control unit Design: compact, closed unit Connection: standardised industrial connections Facilities &

Location: Germany, Baden-Württemberg Southwest Condition: Used Manufacturer: Alzmetall Model No.: 30/S Year of Make: 2004 For sale is a used Alzmetall ALZSTAR 30/S column drilling machine, built in 2004, from German quality production. Technical data: Drilling capacity in steel E335 (St 60): 30 mm Tapping performance in steel E335: M16 Tapping performance in cast iron EN-GJL-200: M20 Spindle holder: MK 3 Quill stroke / Z-stroke of the spindle: 140 mm Projection / spindle distance to column: 293 mm Column diameter: 115 mm Table size / clamping surface: 514 x 360 mm (on the

Location: Germany, Baden-Württemberg Southwest Condition: Used Manufacturer: STAR Micronics Model No.: SA-12/16 Year of Make: 2002 Hours: 53000 STAR CNC Swiss lathe SA 12/16, built in 2002 CNC control FANUC 18i-T Technical data - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. rod diameter : 16 [mm] - Z-axis travel : 140 [mm] - Spindle speed : 8000 [rpm] - Spindle drive power : 2.2 [kW] - Tool positions number : 13 SUB-SPINDLE - Max. rod diameter : 12 [mm] - Spindle speed : 8000 [rpm] - Tool positions

Location: Germany, Baden-Württemberg Southwest Condition: Used Manufacturer: STAR Micronics Model: SR20R Year of Make: 1999 gebr. CNC Swiss lathe STAR SR20R, built in 1999 Control, Fabr. Fanuc, 18i-T Series, 7 axes (X/Z/Y/C1/X1/Z1(C2), Rods - max. 20 mm, Turning length max. 205 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Sub-spindle with collet, speed max. 8,000 rpm, C-axis, Tool holder for a total of 19 tools (linear tool holder, front apparatus, reverse side machining), Parts Conveyor Belt, Standard Guide Bushing Unit Charging magazine FMB turbo

Location: Germany, Baden-Württemberg Southwest Condition: Used Manufacturer: STAR Micronics Model: SR20R Year of Make: 2001 gebr. CNC Swiss lathe STAR SR20R, built in 2001 Control, Fabr. Fanuc, 18i-T Series, 7 axes (X/Z/Y/C1/X1/Z1(C2), Rods - max. 20 mm, Turning length max. 205 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Sub-spindle with collet, speed max. 8,000 rpm, C-axis, Tool holder for a total of 19 tools (linear tool holder, front apparatus, reverse side machining), Parts Conveyor Belt, Standard Guide Bushing Unit IEMCA Charging Magazine

Location: Germany, Baden-Württemberg Southwest Condition: Mint Model No.: SMW gebr. Technical description – SMW-Autoblok HFKN-D 165-45 A5 Description: Three-jaw wedge bar chuck Manufacturer: SMW-Autoblok Model No.: HFKN-D 165-45 A5 Design: High-performance power chuck with wedge rod drive Technical data (typical for this model): Chuck: 165?mm Central through hole (hole): approx. 45?mm Recording: A5 (DIN 55026) Actuation: Hydraulic (wedge rod mechanism) Number of jaws: 3 (centrically clamping) Max. clamping force: depending on hydraulic pressure approx.

Location: Germany, Baden-Württemberg Southwest Condition: Mint Model No.: SMW gebr. Technical description – SMW-Autoblok HFKN-D 165-45 A5 Description: Three-jaw wedge bar chuck Manufacturer: SMW-Autoblok Model No.: HFKN-D 165-45 A5 Design: High-performance power chuck with wedge rod drive Technical data (typical for this model): Chuck: 165?mm Central through hole (hole): approx. 45?mm Recording: A5 (DIN 55026) Actuation: Hydraulic (wedge rod mechanism) Number of jaws: 3 (centrically clamping) Max. clamping force: depending on hydraulic pressure approx.

Location: Germany, Baden-Württemberg Southwest Condition: Used Manufacturer: STAR Micronics Model No.: SB-16 Year of Make: 2003 Hours: 86000 STAR CNC Swiss lathe SB 16, built in 2003 CNC control FANUC 18i-TB Technical data - Number of axes : 6 - Number of spindles : 2 MAIN SPINDLE - Max. rod diameter : 16 [mm] - Z-axis travel : 205 [mm] - Spindle speed : 10000 [rpm] - Spindle drive power : 3.7 [kW] - Minimum C-axis resolution : 0.001 SUB-SPINDLE - Max. rod diameter : 16 [mm] - Spindle speed : 8000 [rpm] - Minimum resolution C-axis

Location: Germany, Baden-Württemberg Southwest Condition: Used Manufacturer: STAR Micronics Model No.: SA-12 Year of Make: 2003 Hours: 42000 STAR CNC Swiss lathe SA 12, built in 2003 CNC control FANUC 18i-T Hours: 42000 Technical data - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. rod diameter : 12 [mm] - Z-axis travel : 140 [mm] - Spindle speed : 8000 [rpm] - Spindle drive power : 2.2 [kW] - Tool positions number : 13 SUB-SPINDLE - Max. rod diameter : 10 [mm] - Spindle speed : 8000 [rpm] -