We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (14)
- Automatics (Lathes) For Bars (6)
- Bench Lathes For Precision Mechanics (7)
- Carousel Turning Machines (Lathes) (57)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (37)
- CNC Cycle Turning Machines (43)
- CNC Double Spindel Turning Maschines (Lathes) (16)
- CNC Long Turning Automatics (24)
- CNC Long Turning Machines (21)
- CNC Multiple Spindel Turning Lathes (10)
- CNC Sloping Beds (2)
- CNC Turning Automatics (25)
- CNC Turning Centers (246)
- CNC Turning Machines (572)
- Cutting-Off Machines (9)
- Cycle Lathes (40)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (281)
- Facing Disks (1)
- Facing Lathes (9)
- Facing Lathes With Tailstock (1)
- Feed Automatics (1)
- Heavy Lathes (37)
- High Precision Lathes (9)
- High Precision Turning Machines (Lathes) (8)
- High Speed Lathes (1)
- Hollow Spindle Turning Machines (Lathes) (4)
- Horizontal Turning Centres (2)
- Horizontal Turning Machines (Lathes) (5)
- Longitudinal Turning Machines (Lathes) (5)
- Lunettes (19)
- Multi Spindle Automatics For Bars (25)
- Multi Spindle Chucking Automatics (1)
- Multi-spindle turn automatics (25)
- NC Universal Turning Machines (Lathes) (2)
- Other Turning Machines (19)
- Pointed Turning Automatics (Lathes) (3)
- Ride-Along Lunettes (1)
- Rotating Benches (15)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (8)
- Sloping Bed Turning Machines (Lathes) (1)
- Special Purpose Turning Machines (2)
- Spindle Turning Automatics (Lathes) For Bars (3)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (15)
- Turning Automatics For Bars With Counter-Spindle (1)
- Turning Benches (2)
- Turning Machines (Lathes) (97)
- Turning Machines (Lathes) And Turning Automatics (2)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (4)
- Universal Lathes > 800 Mm Diameter (10)
- Universal Lathes Up To 800 Mm Diameter (7)
- Universal Turning Machines (Lathes) (24)
- Vertical Turning Centres (1)
- Vertical Turning Machines (33)
- Vertikal Turning Machines (Lathes) (36)
- Whirling And Thread Whirling Machines (1)
- more
- abb (3)
- ACCUWAY (4)
- AI HEMBRUG (1)
- AJAX (1)
- ALEX TECH (2)
- ALEX TECH VIPER (1)
- ALZMETALL (1)
- AMADA (1)
- AMUTIO-CAZENEUVE (1)
- Angelini (3)
- ANTONIO ANSELMI (1)
- ARAD (1)
- ARGUS - FLOWSERVE (1)
- AXA (1)
- AYEL-TECH (2)
- BAUER (2)
- BECHLER (1)
- Benzinger (8)
- BERG (1)
- Bernardo (21)
- BERTHIEZ (4)
- BIGLIA (26)
- BISON (1)
- Blansko (2)
- BOEHRINGER (26)
- BOEHRINGER-VDF (1)
- BOLEY (4)
- BRAUN ZERBST (1)
- BREUNING-IRCO (1)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUFFALO CHALLENGER (1)
- BULMAG (1)
- Bulmak (2)
- BÖHRINGER (4)
- CAORLE (1)
- CARNAGHI (1)
- CARNAGHI PIETRO (1)
- CAZENEUVE (29)
- CAZENUEVE (1)
- Celoria (2)
- CERUTI (1)
- CHALLENGER (2)
- Chevalier (2)
- CHIAH CHYUN MUELLER (1)
- Chiron (3)
- CHUN ZU (1)
- CITIZEN (26)
- CKD (1)
- CKD BLANSKO (2)
- CKD-BLANSKO (2)
- CLOVIS (1)
- CMT (3)
- CMT MASCHINENBAU (1)
- CMZ (8)
- Colchester (39)
- COLOMBO (2)
- COMEC (1)
- Contur (2)
- CORMAK (1)
- CRAWFORD SWIFT (2)
- CS (1)
- CZ.TECH (1)
- D (1)
- DAEWOO (8)
- DAEWOO (DOOSAN) (2)
- DAINICHI (1)
- DEMOOR (2)
- DIEDESHEIM (1)
- DINN SPINNING LATHE (1)
- DIVERS (1)
- DMG (24)
- DMG GILDEMEISTER (25)
- DMG GILDEMISTER (1)
- DMG MORI (60)
- DMG Mori Seiki (4)
- DMG MORI SEKI (1)
- DMG MORI WASINO (1)
- DMG-GILDEMEISTER (2)
- DMG-MORI (1)
- DMT (1)
- DMT / KERN (1)
- DMTG (1)
- DN SOLUTIONS (6)
- Doerries Scharmann (2)
- DOOSAN (70)
- DOOSAN DAEWOO (5)
- DOOSAN PUMA (2)
- DOOSAN, MIRCRO, ETC. (1)
- DOOSAN-DAEWOO (1)
- DOOSAN-PUMA (1)
- DORMAC (1)
- DORRIES (1)
- DORRIES. (1)
- DS DORRIES SCHARMANN (1)
- DUGARD (1)
- DÖRRIES (12)
- DÖRRIES SCHARMANN (1)
- DÖRRIES-SCHARMANN (2)
- E/D/E, WUPPERTAL (1)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 102)
abb 3
ACCUWAY 4
AJAX 1
AMADA 1
Angelini 3
ARAD 1
AXA 1
BAUER 2
BECHLER 1
BERG 1
Bernardo 21
BERTHIEZ 4
BIGLIA 26
BISON 1
Blansko 2
BOEHRINGER 26
BOLEY 4
BULMAG 1
Bulmak 2
CAORLE 1
CARNAGHI 1
CAZENEUVE 29
Celoria 2
CERUTI 1
Chiron 3
CHUN ZU 1
CITIZEN 26
CKD 1
CLOVIS 1
CMT 3
CMZ 8
Colchester 39
COLOMBO 2
COMEC 1
Contur 2
CORMAK 1
CS 1
CZ.TECH 1
D 1
DAEWOO 8
DAINICHI 1
DEMOOR 2
DIVERS 1
DMG 24
DMG MORI 60
DMG-MORI 1
DMT 1
DMTG 1
DOOSAN 70
DORMAC 1
DORRIES 1
DORRIES. 1
DUGARD 1
DÖRRIES 12
EBOSA 2
ECHEA 1
ECOCA 1
EGURO 1
ELMAG 3
EMAG 39
Emco 53
Ergomat 7
ESCO 1
FALCON 1
FAMAR 5
FAMGT 1
FANUC 2
FARREL 1
FAT 3
FEELER 4
Feinbau 3
FMB 5
Forkardt 2
FORMAT 1
FREMTAS 1
FRORIEP 4
GDW 3
GEMA 1
GEMINIS 13
Gildemeister 122
Goodway 6
Graziano 3
GURUPTZE 1
GURUTZPE 8
Guss 2
GWM-TECH 2
HAAS 34
HANKOOK 4
HANWHA 7
HAPREMEC 1
HARDINGE 15
Harrison 6
HBM 9
HEID 1
HERKULES 2
HESSAPP 3
HNK 1
HOESCH 1
HOFFMAN 1
HOFMANN 1
HUNGER 1
HURCO 7
HUVEMA 10
HWACHEON 10
Hyundai 17
ICOCA 1
IEMCA 2
IMT 1
INDEX 84
INNSE 2
IRLE 1
JESSEY 9
JMTCL 1
JOHNFORD 5
JUNG 1
KAMI 5
Kern 4
KERN-DMT 1
KEYENCE 4
KIA 1
Kitagawa 2
KITAMURA 2
KLAASSEN 1
Klaaßen 2
Klopfer 2
KME 1
KMT 1
KNUTH 6
KOLOMNA 9
Kovosvit 4
LABOR 2
LACFER 2
LATHES 1
LEADWELL 5
LEALDE 1
LEIFELD 1
Leinen 3
LIEBER 1
LNS 5
LORCH 1
LÖW 2
M+M 1
MAE 1
MAIER 4
MAMMUT 1
MANURHIN 5
MARTIN 8
MAS 11
MATRA 4
MAYFRAN 1
Mazak 110
MCM 4
MERLI 1
METOSA 1
MEUSER 14
MEXPOL 2
MFD 2
MICROCUT 3
MIOTAL 4
approved
dealer
dealer
Inv. Num. : 8638 Type: SPU 20 Producer: MAS Created: 1995 Parameters: Control system: Siemens Maximum turning length: 700 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 380 mm
approved
dealer
dealer
Inv. Num. : 8637 Type: MF SPRINT 65 Producer: Gildemeister Created: 1999 Parameters: Control system: Siemens Maximum turning diameter: 200 mm
The machine is in good technical condition, after prior agreement it is possible to test it. Control system: Fanuc Max. turning diameter: ø65mm Max. workpiece length: 300mm Turret head: 2x12 driven positions Bar feeder: IEMCA master 880 MP Cooling + chip conveyor
approved
dealer
dealer
Inv. Num. : 8618 Type: FTC 350 XLS Producer: FEELER Created: 2014 Parameters: Control System: FANUC Series Oi-TD Switch-on hours: 9330 h Hours: 7081 h Maximum turning length: 870 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 630 mm Number of Spindles: 2 pieces Maximum spindle speed: 4500 1/min Equipment: Chuck
approved
dealer
dealer
Inv. Num. : 8570 Type: SU 50 A/2000 Producer: TOS Generated: Parameters: Maximum turning length: 2000 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter via support: 250 mm Weight: 3260 kg Equipment: Digital measurement
Control Fanuc ... 18i-TB Turning diameter ... 20mm Turning length ... 165mm Y axis Sub-spindle Spindle bore ... 31mm Powered tools Bar Feeder Spindle speed ... 0-8000 rpm. Total power requirement ... 6kVA Machine weight ... 2550kg L x W x H ... 2200x1200x2000mm
approved
dealer
dealer
Inv. Num. : 8559 Type: WDR 1000 CNC Producer: Wagner Created: 2011 Parameters: Control system: Siemens 840D Maximum turning length: 5000 mm Maximum turning diameter over bed: 750 mm Maximum turning diameter over support: 666 mm
approved
dealer
dealer
Inv. Num. : 8552 Type: TMM-250 M1 Producer: Takisawa Created: 2005 Parameters: Control system: FANUC 180i Max. turning diameter: 350 mm Maximum spindle speed: 4000 1/min Bar diameter: 50.8/76.2 mm Length: 4745 mm Width: 2932 mm Height: 2250 mm Weight: 8500 kg Equipment: 2 spindles and 2 heads with driven tools
approved
dealer
dealer
Inv. Num. : 8549 Type: Cutex-160B MC Producer: Hwacheon Created: 2017 Parameters: Control system: FANUC 0i-SERIES (TF) Max. turning diameter: 260 mm Maximum turning diameter over bed: 550 mm Maximum spindle speed: 4500 1/min Lathe chuck diameter: 200 mm Weight: 3280 kg
approved
dealer
dealer
Inv. Num. : 8535 Type: TNL 18P Producer: TRAUB Created: 2013 Parameters: Control system: TRAUB SYSTEM TX 8i-p Max. rod diameter: 20 mm Maximum turning length: 180 mm Number of Spindles: 2 pieces Maximum spindle speed: 8000 1/min Length: 2500 mm Width: 1460 mm Height: 2250 mm Weight: 4000 kg Equipment: Bar Feeder
The machine is in good technical condition, inspection and trial operation is possible by prior arrangement
The machine is in good technical condition, inspection and trial operation is possible by prior arrangement. Extraction and filtration system from the company Wemac spol. s r.o. Oil mist separator FILTERMIST FX-2002, serial number 065177, motor 0.55 kW Dimensions: L 2,980 x W 1,750 x H 1,750 mm Total connected load: 22 kVA, maximum power supply 3x 380 V Control system: FANUC 21iTB Weight: 2,200 kg Videos of the machine's ongoing operation are available.
The machine is in good technical condition, an inspection by prior arrangement is possible. Max. turning diameter: 465 mm Max. circumferential diameter: 680 mm Max. rotation diameter via cross slide: 465 mm Max. width of the cross-section: 315 mm Travel in X/Z: 300/1050 mm 315mm 3-Jaw Hydraulic Chuck Max. spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% ED): 33/22 kW Max. spindle torque (40%/100% ED): 630/420 Nm Max. speed driven tools: 4000 rpm Programmable tailstock, tool measurement, chip conveyor S/No. 8045000336E (2011) Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): 5250 x 2300 x 2000 mm Machine weight: 8000 kg
The machine is in good technical condition, a test run is possible by prior arrangement. Machine (incl. chip conveyor): 290 x 235 cm, weight: 3500–4000 kg Transformer station: 65 x 60 cm, weight: 150 kg Max. turning length: 81.3 mm Max. turning diameter: 99.1 mm CNC control: Fanuc 21iT X-axis: 300 mm Z-axis: 240 mm Spindle holder: A2-6 Spindle bore: 33 mm Number of tools in the turret: 8 Number of driven tools: 10 Spindle speed: up to 4000 rpm Spindle motor power: 11 kW Tailstock: No Bar Feeder: No Dimensions (L x W x H): 2600 × 2300 × 2400 mm Weight: 3900 kg
The machine is in good technical condition, a test run is possible by prior arrangement. (spindle 32 mm) + Mitsubishi E60 control. Bar feeder included – for bars up to 3000 mm! Max. turning diameter: 60 mm Max. turning length: 120 mm Circulation diameter over cross slide: 120 mm X-axis: 170 mm Z-axis: 170 mm Spindle bore: 34 mm Max. bar diameter when using the loader: 32 mm Spindle holder: diameter 85 mm Spindle motor: 3.7 kW Spindle speed: 100–5,000 rpm Rapid traverse (X and Z axis): 15 m/min Min. program input: 0.001 mm Max. tool diameter: 16 mm Machine dimensions (L x W x H): 1200 x 1000 x 1500 mm
The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.
The machine is in good technical condition, a test run is possible by prior arrangement. Hours: 8,981 Upper driven tool turrets with Y-axis, lower driven turret, double slide with two spindles. Control: FANUC 31i-B. Max. circumferential diameter above the bed: 300 mm Max. circumferential diameter over the support: 230 mm Max. turning diameter above the bed with upper turret: 230 mm Max. turning diameter above the bed with lower turret: 230 mm Max. turning length: 600 mm Max. distance between the ends of the right and left spindle: 980 mm Milling area outside the axis of rotation due to Y-axis: 100 mm (+/- 50 mm) Max. rod diameter (left spindle): 65 mm Max. rod diameter (right spindle): 65 mm Max. permissible workpiece weight without sub-spindle (incl. chuck weight = 23 kg): 12 kg Total weight: 7,800 kg Accessories: SS 2500 bar feeder, length 200–1 ...
"The machine is in good technical condition, a test run is possible by prior arrangement."
The machine is in good technical condition, a test run is possible by prior arrangement. Lathe WEILER Praktikant 160 AC Year of Make: 1996 Serial Number: 4057 Circumferential diameter over bed: 320 mm Center width: 650 mm Circumferential diameter over support: 160 mm Spindle bore: 35 mm Speed range: 48 – 2500 rpm Drive power: 4 kW Dimensions (L x W x H): 500 × 1240 × 1550 mm Weight: 680 kg
approved
dealer
dealer
Inv. Num. : 8473 Type: AS14 Producer: Tornos Generated: Parameters: Max. rod diameter: 14 mm Maximum turning length: 3000 mm Number of spindles: 6 pieces Maximum main spindle power: 7.5 kW Maximum spindle speed: 6000 1/min Length: 2150 mm Width: 820 mm Height: 1466 mm Weight: 2500 kg
approved
dealer
dealer
Inv. Num. : 5411 Type: SK 12 Producer: TOS Created: 1961 Parameters: Table diameter: 1200 mm Max. turning diameter: 1300 mm Maximum workpiece weight: 4 t Max. workpiece height: 1000 mm Weight: 18.3 t
Circumferential diameter over bed ... 500mm Turning length ... 2000mm Max. workpiece weight ... 300kg Circumferential diameter via support ... 270mm Spindle bore ... 52mm Spindle speed ... 22-2000 rpm Main engine power ... 5.5kW L x W x H ... 3640x1100x1580mm Machine weight ... 1940kg The machine is in good condition, possible to test under power.
Control Fanuc Turning diameter ... 380mm Axis X ... 151mm Axis Z ... 339mm Circumferential diameter via support ... 290mm Spindle speed ... 20-6000 rpm. Machine weight ... 4200kg Main engine power ... 7.5kW L x W x H ... 2885/3865x1720x1670mm The machine is in good condition, possible to test under power.
Control Siemens ... Sinumerik 840 D Max.workpiece diameter ... 3200mm Turntable diameter ... 3000mm Max.table load... 14000kg Max. workpiece height ... 2200mm Axis Z ... 1155mm Max. workpiece weight ... 14000 kg Main engine power ... 81 kW Floor space... DXŠXV 7200x6400x6600mm The machine is in very good condition,
approved
dealer
dealer
Inv. Num. : 8329 Type: KMX 413 Producer: MANURHIN Created: 2018 Parameters: Control system: FANUC Hours: 9473 h Max. rod diameter: 16 mm Number of axles: 4 plus 2 pieces Maximum spindle speed: 12000 1/min Spindle bore: 19 mm Spindle stroke: 130 mm Equipment: Collets Bar Feeder Spindle adjustment for 16 mm rod without adjusting the rod end
approved
dealer
dealer
Inv. Num. : 8328 Type: KMX 732 evo Producer: MANURHIN Created: 2013 Parameters: Control system: FANUC Operating hours: 20723 h Max. rod diameter: 32 mm Number of Spindles: 7 plus 2 pieces Maximum spindle speed: 10000 1/min Spindle bore: 37 mm Spindle stroke: 410 mm Weight: 4500 kg Equipment: Collets Bar Feeder Ducts (21 and 13 mm) Telescopic reduction inserts (inner diameter 21 and 13 mm)
approved
dealer
dealer
Inv. Num. : 8314 Type: 42 BNA DHY Producer: Miyano Created: 2011 Parameters: Max. turning length: 235 mm Max. turning diameter: 80 mm Maximum spindle speed: 6000 1/min Max. rod diameter: 42 mm Weight: 3900 kg Equipment: IEMCA Bar Feeder
approved
dealer
dealer
Inv. Num. : 8240 Type: KNC 32 Producer: STAR Created: 1990 Parameters: Control System: Fanuc Series O-TT Maximum turning length: 310 mm Max. turning diameter: 32 mm Maximum main spindle power: 8 kW Maximum spindle speed: 6000 1/min Length: 3100 mm Width: 1900 mm Height: 1900 mm Weight: 4000 kg
approved
dealer
dealer
Inv. Num. : 8232 Type: Twin 42 Producer: Gildemeister Created: 2002 Parameters: Control system: Siemens Sinumerik Switch-on hours: 80654 h Hours: 33758 h Maximum turning length: 650 mm Maximum turning diameter over bed: 250 mm Maximum turning diameter over support: 120 mm Maximum length of travel in the X-axis: 300 mm Max. travel length of the Z-axis: 650 mm Maximum spindle speed: 7000 1/min Length: 4770 mm Width: 2220 mm Height: 1950 mm Weight: 5500 kg Equipment: Powered tools Bar Feeder
approved
dealer
dealer
Inv. Num. : 8229 Type: PD-CNC Producer: Spinner Created: 2007 Parameters: Control system: Siemens Max. turning diameter: 120 mm Maximum length of travel in the X-axis: 400 mm Maximum feed rate in the Z-axis: 400 mm Maximum spindle speed: 8000 1/min Length: 2500 mm Width: 1400 mm Height: 1700 mm Weight: 2300 kg
