lathes used for sale (3,036)

Inv. Num. : 8549 Type: Cutex-160B MC Producer: Hwacheon Created: 2017 Parameters: Control system: FANUC 0i-SERIES (TF) Max. turning diameter: 260 mm Maximum turning diameter over bed: 550 mm Maximum spindle speed: 4500 1/min Lathe chuck diameter: 200 mm Weight: 3280 kg

Inv. Num. : 8543 Type: TU 360 Producer: Colchester Harrison Generated: 2000 Parameters: Equipment: Universal chuck

Inv. Num. : 8535 Type: TNL 18P Producer: TRAUB Created: 2013 Parameters: Control system: TRAUB SYSTEM TX 8i-p Max. rod diameter: 20 mm Maximum turning length: 180 mm Number of Spindles: 2 pieces Maximum spindle speed: 8000 1/min Length: 2500 mm Width: 1460 mm Height: 2250 mm Weight: 4000 kg Equipment: Bar Feeder

The machine is in good technical condition, inspection and trial operation is possible by prior arrangement

The machine is in good technical condition, inspection and trial operation is possible by prior arrangement. Extraction and filtration system from the company Wemac spol. s r.o. Oil mist separator FILTERMIST FX-2002, serial number 065177, motor 0.55 kW Dimensions: L 2,980 x W 1,750 x H 1,750 mm Total connected load: 22 kVA, maximum power supply 3x 380 V Control system: FANUC 21iTB Weight: 2,200 kg Videos of the machine's ongoing operation are available.

The machine is in good technical condition, an inspection by prior arrangement is possible. Max. turning diameter: 465 mm Max. circumferential diameter: 680 mm Max. rotation diameter via cross slide: 465 mm Max. width of the cross-section: 315 mm Travel in X/Z: 300/1050 mm 315mm 3-Jaw Hydraulic Chuck Max. spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% ED): 33/22 kW Max. spindle torque (40%/100% ED): 630/420 Nm Max. speed driven tools: 4000 rpm Programmable tailstock, tool measurement, chip conveyor S/No. 8045000336E (2011) Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): 5250 x 2300 x 2000 mm Machine weight: 8000 kg

The machine is in good technical condition, a test run is possible by prior arrangement. Machine (incl. chip conveyor): 290 x 235 cm, weight: 3500–4000 kg Transformer station: 65 x 60 cm, weight: 150 kg Max. turning length: 81.3 mm Max. turning diameter: 99.1 mm CNC control: Fanuc 21iT X-axis: 300 mm Z-axis: 240 mm Spindle holder: A2-6 Spindle bore: 33 mm Number of tools in the turret: 8 Number of driven tools: 10 Spindle speed: up to 4000 rpm Spindle motor power: 11 kW Tailstock: No Bar Feeder: No Dimensions (L x W x H): 2600 × 2300 × 2400 mm Weight: 3900 kg

The machine is in good technical condition, a test run is possible by prior arrangement. (spindle 32 mm) + Mitsubishi E60 control. Bar feeder included – for bars up to 3000 mm! Max. turning diameter: 60 mm Max. turning length: 120 mm Circulation diameter over cross slide: 120 mm X-axis: 170 mm Z-axis: 170 mm Spindle bore: 34 mm Max. bar diameter when using the loader: 32 mm Spindle holder: diameter 85 mm Spindle motor: 3.7 kW Spindle speed: 100–5,000 rpm Rapid traverse (X and Z axis): 15 m/min Min. program input: 0.001 mm Max. tool diameter: 16 mm Machine dimensions (L x W x H): 1200 x 1000 x 1500 mm

The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.

The machine is in good technical condition, a test run is possible by prior arrangement. Hours: 8,981 Upper driven tool turrets with Y-axis, lower driven turret, double slide with two spindles. Control: FANUC 31i-B. Max. circumferential diameter above the bed: 300 mm Max. circumferential diameter over the support: 230 mm Max. turning diameter above the bed with upper turret: 230 mm Max. turning diameter above the bed with lower turret: 230 mm Max. turning length: 600 mm Max. distance between the ends of the right and left spindle: 980 mm Milling area outside the axis of rotation due to Y-axis: 100 mm (+/- 50 mm) Max. rod diameter (left spindle): 65 mm Max. rod diameter (right spindle): 65 mm Max. permissible workpiece weight without sub-spindle (incl. chuck weight = 23 kg): 12 kg Total weight: 7,800 kg Accessories: SS 2500 bar feeder, length 200–1 ...

"The machine is in good technical condition, a test run is possible by prior arrangement."

The machine is in good technical condition, a test run is possible by prior arrangement. Lathe WEILER Praktikant 160 AC Year of Make: 1996 Serial Number: 4057 Circumferential diameter over bed: 320 mm Center width: 650 mm Circumferential diameter over support: 160 mm Spindle bore: 35 mm Speed range: 48 – 2500 rpm Drive power: 4 kW Dimensions (L x W x H): 500 × 1240 × 1550 mm Weight: 680 kg

Inv. Num. : 8473 Type: AS14 Producer: Tornos Generated: Parameters: Max. rod diameter: 14 mm Maximum turning length: 3000 mm Number of spindles: 6 pieces Maximum main spindle power: 7.5 kW Maximum spindle speed: 6000 1/min Length: 2150 mm Width: 820 mm Height: 1466 mm Weight: 2500 kg

I am selling this machine. Plugged in, can be tested. Very good condition. Documentation for the machine. Can be sent via whatsapp video of the machine

Inv. Num. : 5411 Type: SK 12 Producer: TOS Created: 1961 Parameters: Table diameter: 1200 mm Max. turning diameter: 1300 mm Maximum workpiece weight: 4 t Max. workpiece height: 1000 mm Weight: 18.3 t

Circumferential diameter over bed ... 710mm Turning length ... 2000mm Max. workpiece weight... 850kg Circumferential diameter via support ... 420mm Spindle bore... 73.5mm Spindle speed ... 10-1000 rpm Main engine power ... 7.5kW L x W x H ... 4100x1400x1560mm Machine weight ... 3080kg The machine is in good condition, possible to test under power.

Circumferential diameter over bed ... 500mm Turning length ... 2000mm Max. workpiece weight ... 300kg Circumferential diameter via support ... 270mm Spindle bore ... 52mm Spindle speed ... 22-2000 rpm Main engine power ... 5.5kW L x W x H ... 3640x1100x1580mm Machine weight ... 1940kg The machine is in good condition, possible to test under power.

Control Fanuc Turning diameter ... 380mm Axis X ... 151mm Axis Z ... 339mm Circumferential diameter via support ... 290mm Spindle speed ... 20-6000 rpm. Machine weight ... 4200kg Main engine power ... 7.5kW L x W x H ... 2885/3865x1720x1670mm The machine is in good condition, possible to test under power.

Control Siemens ... Sinumerik 840 D Max.workpiece diameter ... 3200mm Turntable diameter ... 3000mm Max.table load... 14000kg Max. workpiece height ... 2200mm Axis Z ... 1155mm Max. workpiece weight ... 14000 kg Main engine power ... 81 kW Floor space... DXŠXV 7200x6400x6600mm The machine is in very good condition,

Inv. Num. : 8329 Type: KMX 413 Producer: MANURHIN Created: 2018 Parameters: Control system: FANUC Hours: 9473 h Max. rod diameter: 16 mm Number of axles: 4 plus 2 pieces Maximum spindle speed: 12000 1/min Spindle bore: 19 mm Spindle stroke: 130 mm Equipment: Collets Bar Feeder Spindle adjustment for 16 mm rod without adjusting the rod end

Inv. Num. : 8328 Type: KMX 732 evo Producer: MANURHIN Created: 2013 Parameters: Control system: FANUC Operating hours: 20723 h Max. rod diameter: 32 mm Number of Spindles: 7 plus 2 pieces Maximum spindle speed: 10000 1/min Spindle bore: 37 mm Spindle stroke: 410 mm Weight: 4500 kg Equipment: Collets Bar Feeder Ducts (21 and 13 mm) Telescopic reduction inserts (inner diameter 21 and 13 mm)

Inv. Num. : 8314 Type: 42 BNA DHY Producer: Miyano Created: 2011 Parameters: Max. turning length: 235 mm Max. turning diameter: 80 mm Maximum spindle speed: 6000 1/min Max. rod diameter: 42 mm Weight: 3900 kg Equipment: IEMCA Bar Feeder

Inv. Num. : 8280 Type: SKIQ 8 Producer: TOS Created: 2017 Parameters: Table diameter: 800 mm Clamp speed: 400 1/min Max. workpiece height: 630 mm Max. workpiece weight: 2500 kg Length: 3850 mm Width: 2133 mm Height: 4750 mm Weight: 16000 kg

Inv. Num. : 8240 Type: KNC 32 Producer: STAR Created: 1990 Parameters: Control System: Fanuc Series O-TT Maximum turning length: 310 mm Max. turning diameter: 32 mm Maximum main spindle power: 8 kW Maximum spindle speed: 6000 1/min Length: 3100 mm Width: 1900 mm Height: 1900 mm Weight: 4000 kg

Inv. Num. : 8232 Type: Twin 42 Producer: Gildemeister Created: 2002 Parameters: Control system: Siemens Sinumerik Switch-on hours: 80654 h Hours: 33758 h Maximum turning length: 650 mm Maximum turning diameter over bed: 250 mm Maximum turning diameter over support: 120 mm Maximum length of travel in the X-axis: 300 mm Max. travel length of the Z-axis: 650 mm Maximum spindle speed: 7000 1/min Length: 4770 mm Width: 2220 mm Height: 1950 mm Weight: 5500 kg Equipment: Powered tools Bar Feeder

Inv. Num. : 8229 Type: PD-CNC Producer: Spinner Created: 2007 Parameters: Control system: Siemens Max. turning diameter: 120 mm Maximum length of travel in the X-axis: 400 mm Maximum feed rate in the Z-axis: 400 mm Maximum spindle speed: 8000 1/min Length: 2500 mm Width: 1400 mm Height: 1700 mm Weight: 2300 kg

Inv. Num. : 8228 Type: TC-42 Producer: Spinner Created: 2004 Parameters: Control system: Siemens Max. machining length: 500 mm Maximum turning diameter over bed: 400 mm Maximum main spindle power: 12 kW Maximum spindle speed: 4500 1/min Spindle bore: 42 mm Equipment: Powered tools

Control Siemens ... Sinumerik ONE Max. workpiece diameter ... 2200mm Table diameter ... 2000mm Max. table load ... 20000kg Max. workpiece height ... 1710mm Axis Z ... 1000mm Average of the sanding piece ... 180 x 200mm powered tools ... 15 Number of positions in the tool changer... 15 Main engine power ... 58kW L x W x H ... 6700x10400x6400mm Main motor power of driven tools ... 19.5kW Speed of driven tools... 8-3300 rpm Work feed ... 4000mm/min Rapid traverse ... 10000m/min Axis C ... 360° IKZ... 20bar Speed of the clamping plate ... 2-160 rpm Machine weight ... 32000kg Documentation Conveyor C Axis Coverage according to CE marking The machine has undergone a complete overhaul. More info on request. With 1 year warranty.

Inv. Num. : 8204 Type: SK 12 Producer: TOS Created: 1953 Parameters: Max. turning diameter: 1350 mm Clamp plate diameter: 1180 mm Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Inv. Num. : 8203 Type: ALPHA 2800 XS Producer: Harrison Created: 2011 Parameters: Control system: FANUC Maximum turning length: 2000 mm Maximum turning diameter over bed: 800 mm Maximum turning diameter over support: 710 mm Maximum spindle speed: 1400 1/min Spindle bore: 125 mm Weight: 7500 kg