CNC Turning Machines used for sale (535)

TRAUB TNS 65 D / 5 - Axis CNC Lathe -For complete technical data, see data sheets -Control TX8 D -Built in 1994 -Rod passage 65 mm -Hydraulic bar loading magazine -Various driven tool holders -Tool holder -Three-jaw chuck -Complete documentation Hebkn Auovug Uls S Tel

turning diameter: 320 mmturning length: 305 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: 3500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 9027 Type: SE 520 - 1000 Producer: TRENS Created: 2017 Parameters: Control system: SIEMENS Sinumerik 840D Max. turning length: 1000 mm Maximum turning diameter: 520 mm Equipment: 3x bezel 15x quick-release bracket

turning diameter: 385 mmmax. turning diameter: 620 mmturning length: 958 mmcontrol: MSD 501 II Mori Seikigreates pass round over bed: 710 mmSwing dia. over traverse guideway: 738 mmcentre distance: 1.125 mmMain spindle:: turning speed range - main spindle: 10 - 1.600 min/-1power capacity - main spindel: 30 / 22 kWspindle bearing diameter: 180 mmspindle bore: 130 mmspindle nose: JIS A2-11 axis stroke:: x-axis: 345 (310+35) mmz-axis: 995 mmturret:: number of toolpositions: 12 pos.Shank height for square tool: 32 mmDrill shank diameter: max. 60 mmturret change time: 0,4 sec.Tailstock:: tailstock adjustment: 850 mmdia. of quill: 110 mmtaper of center: MK 5 quill stroke: 150 mmfeeds:: rapid traverse: X: 20 / Z: 24 m/minTipp feed: 0 - 1.260 mm/mintotal power requirement: 64 kVAweight of the machine ca.: 11,5 tdimensions of the machine ca.: 5,0 x 2,5 x 2,5 mDocuments: Chip conveyor: Tail ...

The machine is in good technical condition, testing is possible after prior agreement. The machine is offered without a divider.

turning diameter: 620 mmturning length: 2000 mmcontrol: MSX 501 total power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 406 mm, 584 mm

Inv. Num. : 9153 Type: DS-30SSY Producer: HAAS Created: 2015 Parameters: Hours: 3002 h Maximum turning length: 584.2 mm Maximum turning diameter: 406.4 mm Maximum turning diameter over bed: 807.7 mm X-axis travel: 317.5 mm Y-axis travel: 50.6 mm Travel Z-axis: 584 mm Maximum main spindle power: 14 kVA Maximum spindle speed: 4800 1/min Number of all tools: 24 pieces Spindle bore: 88.9 mm Weight: 7259 kg Equipment: Chip conveyor Pick-up spindle C-axis Bar Feeder Tool Alignment System System for removing parts after cutting Driven Axial Holder ER32 (Heimatec) Driven radial bracket ER32 (Heimatec) Holders for rotary tools, other holders and jaws

turning diameter over bed: - mmturning diameter over slide rest: - mmturning length: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe Hurco TM8i no defects , energized

Control: Siemens The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing possible after prior agreement. Swing diameter over bed: 630 mm, max. turning diameter: 350 mm, max. turning length: 870 mm, spindle passage 52 mm.

The machine is equipped with technical documentation, with accessories such as various clamping jaws, holders, square turning chisels, indexable inserts, etc., as well as with a bar feeder. Length of bar feeder approx.: 2200 mm.Additional technical specifications:• Swing circle diameter: max. 700 mm• Rapid traverse: 17.5 m/min• Collet chuck: ISO DIN 173E• Tool holder square: 20 x 20 mm• Tool holder round: 20/25 mm• C-axis resolution: 0.1°• tool places: 14 pieces external• Main spindle: 5, internal: 3 + 4• Driven tool stations: 2• Simultaneous machining: inside and outside• spindle power: 7,5 kW

Key data: 254 mm, 500 mm, 3600 1/min

Stock number: 3967 CNC LATHE Manufacturer: HYUNDAI, Type: HIT 18S Machines NO.: 34156066, Year of manufacture: 1998 Specifications: Max. circulation diameter 254 mm dia. Turning length 500 mm Main motor power 15 kw Main spindle speed range 3600 rpm Spindle bore 75 mm dia. X axis movement 180 mm Z ash movement 510 mm Tool turret 1 with 8 stations Control Siemens 840C Fabr. Controlled in X-Z axes Accessories: Hydr. Chuck main spindle mm dia Various tool holders. Chip conveyance. Tailstock Whtitout Length: 2650 mm, Height: 1900 mm, Width: 1700 mm, Weight: 4300 kg

With technical documentation and accessories, such as three-jaw chuck, clamping jaws and collets.Additional technical specifications:• Max. swing circle: 360 mm• Collet chuck: ISO DIN 163 E• Tool holder square: 16 x 16 mm• Tool holder Round: 20 mm• Spindle power: 5,5 kW• Tool places in total: 7 pieces - External: 4 / Internal: 3

Key data: 324 mm, 600 mm

Control: HEIDENHAIN CNC Pilot 4290 Max. spindle speed: 5,000 1/min C-axis Max. bar passage: 65 mm Travel: X= 260, Z= 630 mm 12-station turret (all driven, max. 4,500 rpm) Tailstock Tailstock stroke: 580 mm Chip conveyor Dimensions LxWxH: 3500 x 2440 x 2100 mm (without chip conveyor) Weight: 6,000 kg Switch-on hours: 32,600 h Spindle hours: 7,600 h

With documentation and accessories including a two-jaw chuck, diameter: 165 mm, basic tool holders, as well as a collet chuck 173E-42 B.Additional technical specifications:• max. Load: 11,0 kW• Swing diameter over bed: 510 mm• Swing diameter over cross slide: 290 mm• max. turning diameter (recommended): 170 mm• max. turning diameter (technical): 320 mm• travel of X-axis: 400 mm (160 + 15 mm)• travel of Z-axis: 330 [550] mm For further technical data, please refer to the photographed machine specification.

The machine is in good technical condition, after prior agreement it is possible to test it. with the Siemens Shopturn system, including the feeder, the machine is fully equipped. BASIC PARAMETERS Working space max. turning Ø: ≈ 410–500 mm max. length: 800 mm distance between spindles: approx. 1020 mm swing diameter above the bed: ~700 mm realistic: ideal for shafts, flanges, bodies up to ~800 mm Travels (axes) X: ~480 mm Y: 100 mm Z: ~800–845 mm B axis: 110 (5-axis machining) C axis: 360 (indexing + interpolation) this makes it a full-fledged turn-mill (not a classic lathe) Spindles main spindle speed: ~5000 rpm power: ~25–34 kW passage: approx. 76–87 mm counter spindle speed: ~6000 rpm milling spindle (main difference compared to a classic lathe) speed: up to 12,000 – 20,000 rpm power: ~19–22 kW taper: HSK-A63 or Capto C6 allows: milling drilling tapping 5-axis simultane ...

With technical documentation and accessories such as tool holders and a two-jaw as well as a three-jaw chuck, incl. SCHUNK clamping jaws, diameter: 165 mm.Additional technical specifications:• spindle chuck diameter: 169 mm• boring bar diameter: 25 mm• cutting feed X, Z: 0.001 - 500.000 mm/rev

Key data: 350 mm, 650 mm, 3500 1/min

CNC Teach-in Lathe COLCHESTER Alpha 1350 XT Travel X: 245 mm Numerical Command FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Spindle diameter: Ø 41 mm Max Rotation: 3500 RPM Turret: 8 tools VDI 30 Year of construction: 2006 Spindle motor: 5,5 kW 3 speed ranges Centralized lubrication pump Delivered with 2 3-jaws chuck Ø 160 mm Delivered with some tool holders (see photos) Voltage: 380 V Dimensions (L x W x H): 2500 x 2000 x 1900 mm Weight: approx 2 T Machine in very good condition

 Chuck incl. hard and soft jaws  Tailstock  Various tool holders  Monitor new (flat screen) Auction-ID: A1-50370-1

Inv. Num. : 9102 Type: Hi-TECH 230 BL YMC Producer: Hwacheon Created: 2019 Parameters: Control system: FANUC Hours: 6623 h Maximum turning length: 584 mm Maximum turning diameter: 400 mm Maximum turning diameter over bed: 750 mm Maximum spindle speed: 3500 1/min Weight: 6650 kg

turning diameter over bed: 2000 mmturning diameter over slide rest: 1600 mmturning length: 10000 mmcontrol: FANUC 0i TF workpiece weight: 17 tsteady: 4 feed: 1 - 3000 mm/minmain drive: 60 kWmain spindle speeds:: 1,5 - 160 U/minbed width: 1150 mmfaceplate: 1600 mmtail stock: tailstock quill diameter: 260 mmtotal power requirement: - kWweight of the machine ca.: - tthe machine is currently being overhauled and equipped with- new electrics (Siemens, Schneider, cabinet)- CNC control FANUC 0i TF- new Fanuc motors- new hydraulic parts- complete mechanical overhaul- Ball screw (B-axis)- bed overhaul- three-track bed- Face plate with 4 jaws- 3 steady rests (2 of the steadies take 500 mm piece, and one of 700 mm)- a set of rolls, for the bigger pieces- incl 1 year warranty from overhauler on electrical and hydraulic components and 2 years on FANUC CNCThe data for this ad was created with ModulMW ...

Control Siemens C 200 – 4D Turning diameter: 100 mm Turning length 280 mm 8-fold revolver with applied revolver Wkzg. 6-fold revolver with applied revolver Wkzg. Spindle speed 6000 min-1 Max. bar passage 60 mm Rear drilling unit for 5 stations Chip conveyor Knoll Coolant system

turning diameter: 190 mmturning length: 620 mmcontrol: Fanuc 18 iT max. bar diameter through the spindel: 65 mmnumber of controlled axis: 9 y-axis: +/- 45 mmturning speed range: 4500 U/minpower capacity: 15/11 kWrapid speed: m/minswivelling range: +/- 91 ° Gradnumber of tapers in turret head: 12/24 + 12/24 number of driven tools in turret: 2x 12 Spindel speed of driven tools: 6000 U/minSpindelpower on driven tool: 5,5/3,7 kWtail stock: Gegenspindel/ sub spindle sup spindle: 5000 U/min 11/7,5 kw dimensions: mweight of the machine ca.: 12,5 tCNC- lathe with sub spindle- 2 turrets, universal for main.- or sub- spindle- upper turret switchable- Y- axis on upper turret- both turrets with 12/24 positions- collet chucks on main- and sub spindle- chip conveyor- parts catcher typ A - few toolingsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc i Series, Dmax320mm, X175 Z330, 5,000rpm, 12 tool positions, Tool measuring system, Part catcher, 4 jaw inserts,, Clamping pliers, many accessories

turning diameter: 400 mmturning length: 549 mmcontrol: HEIDENHAIN Eltropilot swing over bed: 570 mmtravel -x axis: 220 mmtravel -z axis: 635 mmmain spindle bore: 79 mmmain spindle speed: 25 - 5000 U/minmain spindle drive: 21 kWmax. torque on the spindle: max. 240 Nm: 120 mmc-axis, speed: 100 U/minC-axis: Haltemoment 200 NmC-axis resolution: < 0,04 °sub spindle bore: 56 mmsub spindle speed: 25 - 5000 U/minsub spindle drive: 9 kWmax. torque on the spindle: max. 72 Nm: 90 mmc-axis, speed: 100 U/minC-axis: Haltemoment 150 NmC-axis resolution: < 0,04 °feed power X/Z axis: 3,5 / 7 Nmrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/mintool turret: 1 x 12 Stationennumber of driven tool stations: 12 speed of driven tools: 4.000 U/mintotal power requirement: 44 kVAAccessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle,  ...

The machine is in good technical condition, after prior agreement it is possible to test it. ideal machine for complete machining in one clamping (turning + milling). Equipment and parameters: - main spindle + counter spindle (complete machining from both sides) milling spindle with B axis Mazatrol SmoothG control 36-position tool magazine Capto C6 / PSC63 internal cooling large number of accessories (jaws, clamps, holders, etc.) a functional postprocessor for SolidCAM is included in the sale significant time and cost savings when introducing the machine into production

turning diameter: 500 mmswing dia.: 800 mmturning diameter over bed: 450 mmturning length: 800 mmx-travel: 360 mmz-travel: 980 mmspindle turning speed range: 3200 U/minmax. torque on the spindle: 235/939 Nmspindle bore: 110 mmturret (x-stations): 12 control: Fanuc 31i tailstock quill taper MT: 4 total power requirement: 30 kWweight of the machine ca.: 7,6 tdimensions of the machine ca.: LBH 4,2 x 1,98 x 2,1 m- Machine with C-axis and driven tools- 2 driven tool holders- 10 static tool holders- Incl. SMW 3-jaw chuck 315BB- Measuring arm- Chip conveyor- Incl. additional high-pressure pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 9089 Type: CT 40/1000 Producer: Gildemeister Created: 1991 Parameters: Maximum turning length: 1000 mm Maximum turning diameter over bed: 400 mm Maximum turning diameter over support: 225 mm Spindle diameter: 56 mm Weight: 3200 kg Equipment: Chip conveyor Tailstock Spare parts Shovel Powered tools

turning diameter: 900 mmturning length: 1600 mmcontrol: Fanuc 21iTB swing dia.: 1030 mmswing diameter over cross slide guide: 800 mmx-travel: 470 mmz-axis: 1650 mmspindle motor: 37/45 kWspindle turning speed range: 0 - 1800 U/mintransmission ratio: 3 max. torque on the spindle: 5423 NmTurret positions: 12 tailstock quill taper MT: MT6 tailstock quill diameter: 160 mmtailstock quill stroke: 150 mmchucking diameter: 530 mmtotal power requirement: 68,6 kVAweight of the machine ca.: 16,5 tdimensions of the machine ca.: 5,8 x 2,8 x 2,6 m- CNC Control Fanuc 21i-TB- LNS- C-axis 360° (0,001°)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 9085 Type: KMX XL 32 Producer: Manurhin Created: 2003 Parameters: Maximum turning length: 330 mm Max. turning diameter: 33 mm Length: 3850 mm Width: 2000 mm Height: 2100 mm Weight: 6000 kg

x-travel: 150 mmy-travel: +/- 30 mmz-travel: 620 mmchucking diameter: 165 mmMain Spindle:: spindle speed:: 6000 U/minspindle motor: 11 / 7,5 kW2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWTurret: 3x 15 Stckc-axis: 0,0001 °y-axis: +/- 25 mmControl: 32i-TB Rapid Travel X / Y / Z-Achse: 24 / 12 / 40 m/mintotal power requirement: kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4120×2130×2815 mHorizontal lathe with main and counter spindles- Muratec Fanuc 32i-TB CNC control- Main and counter spindles-- 2x C-axis- Tool turret (3x) with Y-axis,-- 15 stations each (BMT 44)-- Powered tools on all stations, 8 kW, 6,000 rpm- Finished part gripper- Conveyor belt- Bar feeder interface- Coolant system, separate 200-litre tank- Cooling unit- High pressure to turrets 1–3 via M-function: 15 bar/40 l/min- Chip conveyor- TransformerOnly approx. 500  ...

Lathe M. Ernault Sorma Cholet 550

turning diameter: max. 356 mmturning length: 1.255 mmcontrol: M 730 BM MAPPS IVgreates pass round over bed: 920 mmSwing dia. over traverse guideway: 742 mmdistance between spindles: 1.511 mmMain spindle:: turning speed range - main spindle: 4.000 min/-1power capacity - main spindel: 18,5 / 15 kWspindle nose: JIS A2-8 spindle bore: 91 mmmax. bar capacity: 80 mmSubspindel:: Spindle speed range subspindle: 6.000 min/-1power capacity - Sub spindle: 11 / 7,5 kWspindle bore: 43 mmaxis stroke:: x-travel: 260 mmz-travel: 1.345 mmY - Axis: +/-50 mmrapid traverse ( X / Y / Z ): 30 / 10 / 30 m/minturret:: number of toolpositions: 12 pos.Schank height for square tool: 25 mmDrill shank diameter: 50 mmturret change time: 0,27 sec.Driven Tool Positions:: Spindle speed - driven tools: max. 6.000 min -1power capacity - driven tools: 5,5 / 3,7 kWtotal power requirement: 50 kVAweight of the machine c ...

Lathe Mori Seiki SL25

turning diameter: 590 mmturning length: 1100 mmcontrol: Fanuc turning diameter over bed: 800 mmtotal power requirement: --- kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 9065 Type: GLS 200 Producer: GOODWAY Created: 2016 Parameters: Control System: FANUC Series Oi-TF Switch-on hours: 15380 h Hours: 7757 h Max. turning length: 300 mm Grinding diameter: 350 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter over support: 380 mm Maximum spindle speed: 4500 1/min Spindle passage: 65 mm Number of tool head positions: 12 Weight: 3200 kg Equipment: Chuck Tool probe Bar Feeder Grips

turning diameter: 600 mmturning length: 1.045 mmcontrol: MSX - 711 III MAPPS IIIswing diameter over support: 600 mmdistance between spindles: 1.255 mmmax. bar capacity: 65 mmMain drive 2: turning speed range - main spindle: max. 5.000 min/-1power capacity - main spindel: 25 / 22 kWno. of turning speeds: 2 spindle nose: JIS A2-6 spindle bore: 73 mminternal diameter: 120 mmC-Axis: 0,0001 °chucking diameter: 200 mmMilling Spindle:: Speed range Tool Spindle: max. 12.000 min/-1Power rating Tool Spindle: 5,5 / 3,7 kWtool taper: Capto C5 internal diameter: 65 mmB - Axis: 0,0001 °swivellable: +/- 120 °axis stroke:: x-axis: 685 (610 + 75) mmy-axis: +/- 125 mmz-axis: 1.075 + 130 mmturret:: number of toolpositions: 12 pos.Shank height for square tool: 20 mmDrill shank diameter: max. 32 mmtool magazin:: tools in tool magazin: 40 pos.max. tool diameter: 70 mmmax. tool-dia with free toolbox:  ...

Inv. Num. : 9056 Type: SPRY 40 CNC-D Producer: ZPS Created: 1994, GO 2016 Parameters: Control system: Siemens Sinumeric 840D Maximum turning length: 300 mm Max. turning diameter: 110 mm Maximum main spindle power: 10 kW Spindle bore: 50 mm Max. rod diameter: 40 mm Weight: 2400 kg Equipment: Duplomatic tool head with rotary tools 3 meter pole holder

turning diameter: 1500 mmturning length: 6000 mmcontrol: Siemens 840 centre height: 700 mmcentre distance: 6000 mmgreates pass round over bed: 1500 mmswing diameter over slide rest: 1190 mmspindle bore: 128 mmspindle turning speed range: 4 - 630 U/minmain drive motor: 37 kWworkpiece weight: 8000 kgtotal power requirement: 67 kVAweight of the machine ca.: 12 tdimensions of the machine ca.: 8,5 x 1,5 x 1,8 mCycle-controlled precision lathe with Siemens CNC controlfor machining shafts, flanged shafts and similar components- Siemens CNC control- 4-jaw chuck- Tailstock- 4-position tool holderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DMG MORI NRX 2000™ CNC Lathe TECHNICAL FEATURES: Year: 2017 NC Type: MITSUBISHI M730UM Maximum diameter Machinable: 150 [mm] X-axis travel: 100 [mm] Z-axis travel: 220 [mm] X1 Axis Fast Feed Speed: 30000 [mm/min] Fast feed speed X2 axis: 30000 [mm/min] Z1 axis fast feed speed: 30000 [mm/min] Z2 axis fast feed speed: 30000 [mm/min] Spindle Nose: JIS A2-5 Maximum length Machinable Spindle 1: 100 [mm] Maximum length Machinable Spindle 2: 100 [mm] Maximum speed Spindle 1: 6000 [rpm] Maximum speed Spindle 2: 6000 [RPM] Turret Turning Tool Power 1: 1.5 [kW] Turret 2 rotating tool power: 1.2 [kW] Number of posts - Turret 1 : 10 Maximum speed Rotating Tools - Turret 1: 10000 [RPM] Number of posts - Turret 2: 10 Maximum speed Rotating Tools - Turret 2: 10000 [RPM] Installed power: 38 [kVA] Supply voltage: 400 [V] Working time: 12270 [h] Weight: 5700 [Kg] EQUIPMEN ...

turning diameter: 310 mmturning length: 1000 mmcontrol: MSX 501 total power requirement: --- kWweight of the machine ca.: 6,6 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 130 mm, 160 mm, 6000 1/min

CNC lathe ARIX / HUMMER T-42CL + bar loading magazine Robust Nitro + chip conveyor – year of construction 2025 For sale is a modern CNC lathe of the type HUMMER T-42CL (ARIX CNC Machines) including bar loading magazine Robust Nitro. The machine was built in 2025, is in very good condition and is ideal for cost-effective series production. Technical data: Model No.: T-42CL Manufacturer: ARIX CNC Machines (Taiwan) Year of Make: 2025 Spindle speed: up to 6,000 rpm Bar Passage: 42 mm Max. turning diameter: approx. 130 mm Max. turning length: approx. 160 mm Axles: X: 225 mm Z: 235 mm Y: 385 mm Main spindle: Power: 7.5 kW Collet holder: A2-5 Tool Stations: 5 lathe tools + 4 driven tools Total: 8 Lots Machine weight: approx. 3,300 – 3,500 kg Equipment: Bar loading magazine Robust Nitro (automatic material feeding) Live Tooling Suitable for series production  ...

turning diameter: 200 mmturning length: 393 mmcontrol: Siemens 810D total power requirement: kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. bar Ø: 42 mm Max. speed: 4,500 1/min 8-station turret of which 4 are powered Travel X= 110, Y= 50 mm 2. 8-station turret of which 4 are powered Speed driven tools: 6,000 1/min 1 longitudinal carriage 1 vertical slide Pick-up spindle Chip conveyor IEMCA BOSS 545 Bar Feeder Weight 4100 kg

CNC-draai- en freescentrum Type: Multus B300 - 1SW De Multus B300W staat bekend om zijn vermogen om diverse bewerkingsprocessen, waaronder draaien, frezen, boren en tappen, te integreren in één gestroomlijnde bewerking. 2 spindels X-as: 580 mm Y-as: 160 mm Z-as: 945 mm B-as: 225° C-as nr1: 360° (0,001°) C-as nr. 2: 360° (0,001°) W-as: 1000 mm Gereedschapswisselaar met 60 posities: - HSK63A - maximaal 10.000 toeren per minuut - 16/11 kW Staafaanvoer LNS 6.68 HS bis D 70 mm - staaflengte 3 meter Spanentransportband Een ruime selectie aan gereedschappen inbegrepen.Swing over bed: 450 mm Distance centre tot centre: 900 mm Max longitudinal travel Z-axis: 945 mm Max cross travel X-axis: 580 mm Dia of spindle bore: 70 mm Power on the spindle: 22 kW Number of speeds: 38 > 3800 rpm Command: Okuma OSP P200L Length: 4400 mm Width: 2032 mm Height: 2590 mm Weight: 10 ton Toolchange ...

The machine is in good technical condition, testing is possible by prior arrangement.

Hydraulische brilSwing over bed: 762 mm Distance centre tot centre: 1118 mm Max longitudinal travel Z-axis: 1118 mm Max cross travel X-axis: 508 mm Spindle cone: A2-8 Dia of spindle bore: 117 mm Power on the spindle: 45 kW Number of speeds: 2400 rpm Command: Haas Length: 5490 mm Width: 2415 mm Height: 2794 mm Weight: 10 ton Toolchanger: yes Number of tools: 12 driven positions

Inv. Num. : 9029 Type: TURN E65 Producer: EMCO Created: 2008 Parameters: Control system: FANUC Max. turning diameter: 500 mm Maximum turning diameter over bed: 610 mm Maximum length of travel in the X-axis: 210 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 610 mm Weight: 6500 kg

Haas ST-25Y Ø 381 x 533 mm CNCSwing over bed: 381 mm Distance centre tot centre: 533 mm Max longitudinal travel Z-axis: 533 mm Max cross travel X-axis: 214 mm Spindle cone: A2-6 Dia of spindle bore: 76 mm Power on the spindle: 22,4 kW Number of speeds: 4000 rpm Command: Haas Length: 3180 mm Width: 1980 mm Height: 1960 mm Weight: 6 ton Toolchanger: yes Number of tools: 12 driven positions