CNC Turning Machines used for sale (535)

Lathe Monforts RNC4 1988 and 1995 Lathe Monforts RNC 5 BJ 1992 Lathes Monforts RNC7 BJ 1992 and 1993

Type: 2280ENC Multifix gereedschapshouders 1 bril Swing over bed: 600 mm Swing over cross-slide: 390 mm Distance centre tot centre: 2000 mm Spindle cone: D-1-8 Dia of spindle bore: 80 mm Power on the spindle: 7,5 kW Number of speeds: 91 > 1800 rpm Command: Fagor Length: 3760 mm Width: 1830 mm Height: 2260 mm Weight: 3,2 ton

CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464.8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Main spindle Speed spindle rpm: 5.000 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Chip conveyor Part catcher Workarea light Bar Loader RBK 10016 Working time hours Potencial nominal kVA: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height  ...

spindle passage: 65 mmMax. Turning length: 450 mmSpindle diameter in forward position: 110 mmcontrol: System TX8 I number of spindle speeds: 4.000 U/minCNC lathe | TNC 42/65 - 2007 equipped with bar loader.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: TNC65 | TNC-65 |TNC 42-65 | TNC 42/65The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8997 Type: SKT 100 Producer: KIA Created: 2006 Parameters: Control System: FANUC Series Oi-TB Switch-on hours: 65471 h Hours: 19209 h Max. turning length: 300 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum length of travel in the X-axis: 210 mm Maximum feed in the Z-axis: 330 mm Maximum spindle speed: 6000 1/min Spindle taper: Morse 4 Max. rod diameter: 45 mm Lathe chuck diameter: 165 mm Weight: 3800 kg

Inv. Num. : 9002 Type: LB3000EXII MYW800 Producer: OKUMA Created: 2014 Parameters: Control system: OKUMA OSP-P300L CNC Switch-on hours: 65458 h Hours: 36054 h Maximum turning length: 785 mm Max. turning diameter: 480 mm Max. turning diameter: 340 mm Spindle diameter: 80 mm Motor power: 22 kW Minimum spindle speed: 45 1/min Maximum spindle speed: 5000 1/min Travel X: 260 mm Travel Y: 115 mm Travel Z: 510 mm Tool magazine: 12 pieces Length: 3330 mm Width: 1800 mm Height: 2250 mm Weight: 5250 kg Equipment: Baking Collets Axis C Sub-spindle Powered tools OSP-P300L Advanced One Touch CF-M-E FILTERMIST FX4002 Suction High-pressure cooling Grips Tool Holder Reducer insert tube In June 2019, the spindle was repaired due to defective bearings. In June 2025, the U4 control unit was replaced. In October 2025, the M control unit w ...

Inv. Num. : 8996 Type: KIT 450 Producer: HYUNDAI-KIA Created: 2008 Parameters: Control System: FANUC Series Oi-TC Switch-on hours: 54066 h Hours: 23954 h Max. turning length: 190 mm Max. turning diameter: 165 mm Maximum turning diameter over bed: 530 mm Maximum length of travel in the X-axis: 400 mm Maximum feed in the Z-axis: 250 mm Spindle speeds: 6000 1/min Max. rod diameter: 44 mm Spindle diameter: 52 mm Weight: 2700 kg Equipment: Bar Feeder

CMZ TL25 B CNC LatheTechnical DataManufacturer: CMZModel: TL25 BMachine Type: CNC LatheYear of Manufacture: 2004Maximum Turning Diameter: 400 mmSwing Over Bed: 685 mmSwing Over Cross Slide: 510 mmX-Axis Travel: 240 mmZ-Axis Travel: 640 mmSpindle Bore: 86 mmBar Capacity: 77 mmSpindle Nose: A2-8Tool Turret: 12 PositionsConnection Voltage: 380 VFrequency: 50 HzRated Current: 62 AEquipment: Three-jaw Chuck 254mm

The machine is in very good technical condition, testing is possible by prior arrangement.

Unicom 6000 groot 5-assig draai- amp; frees bewerkingscentrum (verticaal draaibank met 5-assig freesbewerking) Frezen: - 36 kW vermogen op de spindel - Type: HSK100A - 1 gt; 6000 tpm - 720 Nm - hogedrukkoeling via de spindel 50 bar - Universele frees- en boorkop (2x automatische indexering 2,5°) Draaien: - 70 kW vermogen op tafel - 2 gt; 450 tpm - 25.000 Nm koppel - max swing: dia 2000 mm - max werkstukhoogte: 1330 mm Gereedschapsmagazijn voor draaien en frezen: - Type: HSK100A - 141 posities Tafel: - 3 tafels: Ø 1250 mm / Ø 1600 mm / Ø 1800 mm - automatisch (ont)laden Radio-meetsensor Brankamp botsingsmonitoring Geïntegreerd meetsysteem op de glijbaan Spanentransportband Beeldsysteem met camera en apart scherm Swing over bed: Ø 2000 mm Max longitudinal travel Z-axis: 1000 mm Max cross travel X-axis: 2150 mm Power on the spindle: 70 kW Number of speeds: 2 > 450 rpm (25. ...

Lathe Böhringer DUC 560 BJ 1995

Chevalier FCL 1840 - Ø 460 x 1000 mm CNCSwing over bed: 460 mm Swing over cross-slide: 230 mm Distance centre tot centre: 1000 mm Max longitudinal travel Z-axis: 900 mm Max cross travel X-axis: 250 mm Dia of spindle bore: 58 mm Power on the spindle: 7,5 HP Number of speeds: 40 > 2000 rpm Command: Fagor Total power needed: 5,5 kW Length: 2200 mm Width: 1400 mm Height: 2000 mm Weight: 2300 kg

The machine is in good technical condition, testing is possible by prior arrangement.

turning diameter: 310 mmturning length: 450 mmcontrol: Fanuc O-TC total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Fanuc O-TC12-fold revolver (VDI30)3-jaw chuck main spindle3-jaw chuck sub spindlechip conveyortool measuring devicecoolant deviceTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 500 mmUmlaufdurchmesser über Planschlitten / rotary diameter over sledge 310 mmmax. Drehdurchmesser / max. turning diameter 310 mmmax. Drehlänge / max. turning lenght 450 mmX-Weg / X-travel 200 mmZ-Weg / Z-travel 450 mmDrehzahl / spindle speed 4500 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesStangendurchlass Hauptspindel / bar diameter main spindle 50 mmEilgang X / rapid feed X 24 m/minEilgang Z / rapid feed Z 30 m/min.Antriebsle ...

Lathe Mazak QT10B 1997

: neu : ca. 6 Monate ab Auftragse : Taiwan : 87350 €: 1650.92 €: 540 mm: 1500 mm: 85 mm: 310 mm: 350 mm: D1-8 : 1/20 MK: 3 : 27 - 2250 1/min: 5000 mm/min: 8000 mm/min: 280 mm: 75 mm: 5 MK: 190 mm: 9 / 13,5 (S1 / S6 40%) kW: 0.02 mm: 0.016 mm: ISO3655 : 3340 mm: 1905 mm: 2235 mm: 3400 kgTHREE OPERATING MODES: CNC / TEACH-IN / MANUALSiemens 828D CNC control• 12-inch colour screen• Linear interpolation• Circular interpolation• Helical interpolation• Skip function• Workpiece coordinate system• Coordinate system rotation• Rigid tapping• Mirror image, scaling and rotation• Turning cycle• ShopTurn softwareLarge spindle bore, with precision bearings for high accuracy and consistent cutting stability.Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis.2-axis AC servo motors50-300 mm roller-type tailstock.Manual tailstoc ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 77850 €: 1471.37 €: 460 mm: 1000 mm: 56 mm: 230 mm: 350 mm: D1-6 : 1/20 MK: 3 : 33 - 3100 1/min: 5000 mm/min: 8000 mm/min: 280 mm: 75 mm: 5 MK: 190 mm: 9 / 13,5 (S1 / S6-40%) kW: 0.02 mm: 0.01 mm: ISO3655 : 2840 mm: 1905 mm: 2235 mm: 2900 kgTHREE OPERATING MODES: CNC / TEACH-IN / MANUALSiemens 828D CNC control• 12-inch colour screen• Linear interpolation• Circular interpolation• Helical interpolation• Skip function• Workpiece coordinate system• Coordinate system rotation• Rigid tapping• Mirror image, scaling and rotation• Turning cycle• ShopTurn softwareWith precision bearings ensuring spindle runout of less than 0.005 mm,for high accuracy and consistent cutting stability.Precision ball screw Ø 40 mm (class C5) on the Z-axis and ball screw Ø 25 mm (class C3) on the X-axis.2-axis AC servo motors20-160 mm roller-type  ...

The Okuma MA series is a horizontal machining center with long travel distances for heavy-duty machining. The travels X/Y/X 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm -OSP P200M -BJ 2008 -Cuttng Time 17,500 h -Renishaw Tool Eye -ATC 150 SK50 -2 pallet system -Spindle speed 6000 RPM -B-axis NCB 0.001 degrees -X/Y/Z 1000/900/1000 mm -Mayfran Consept coolant system with chip conveyor & high pressure pump 60 bar In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of  ...

turning speeds: 6000 U/minx-axis: 550 mmz-axis: 200 mmrapid traverse: 30/20 m/minfeed: 11 m/mincontrol: Siemens 840 C total power requirement: 35 kWweight of the machine ca.: 6,5 t- speeds: [1/min.] : 6.000- torque [Nm]: 480- swing diam.: 290 mm- power: [kW] 34- chuck diam. 200 mm- turret: 12-fach, VDI 40, Sauter- driven tools 7,8 KW,- x -travel: 550 mm- z- travel: 200 mm- rapid travel: (X/Z) [m/min] 30 / 20- feeds: (X/Z) [m/min.] 11 KN- connected load: [KW] 36 kW- machineweight: [kg] 6.500- chip conveyor, pick up conveyor links,300mm wide, Auswurfhöhe 800mm- Messsystem direkt-linear, Glasmaßstäbe in allen Achsen, Heidenhain- parts conveyor for feeding parts into the machine- Specification:- Overhauled in 2007 for approx. €50,000, complete headstock replaced.- Feed unit replacedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of Make: 2017 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret: V12 (all places driven) Equipment: - Chip conveyors - Touchsetter - 3-jaw chuck - Tailstock

turning diameter: 190 mmturning length: 190 mmcontrol: BOSCH CC 200 total power requirement: 12 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2 (9 ) x 1,5 x 1,8 mMovie:https://www.youtube.com/watch?v=lr-NrroeTtAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Fanuc ... 0i - TD Turning diameter ... 500mm Turning length ... 1090mm Inclined bed Spindle bore ... 86mm Number of tools (driven tools) ... 12/12 Axis X ... 300mm Axis Z ... 1200mm Spindle speed ... 10-3500 rpm Axis C ... 0,001° Main engine power ... 15/18.5kW Machine weight ... 6000kg L x W x H ... 4483x1800x1830mm

turning diameter: max. 480 mmturning length: max. 2.000 mmcontrol: Sinumerik 840 D Siemensswing diameter max. over bed cover: 520 mmMain spindle:: turning speed range - main spindle: 7 - 2.800 min/-1transmission ratio: 2 power capacity - main spindel: 53 kWmax. Torque: 3.456 Nmspindle nose: 11 DIN 55026chuck diameter: 315 mmspindle bore: 103 mmusable bar diameter: 82 mmaxis stroke:: x-travel: 405 mmz-travel: 2.049 mmTailstock:: diameter of quill: 100 mmquill stroke: 100 mmtension force: 14 kNcapture: 30 DIN 2079feeds:: rapid traverse: 10 m/minWorking speed: 0,1 - 10.000 mm/minfeed power: 15 kNTool Mount:: number of toolpositions: 12 pos.driven statition: 6 pos.Shank diameter: 50 mmpower capacity: 5,4 kWMax. Speed: 2.500 / 625 min/-1max. Torque: 25 / 100 Nmtotal power requirement: ca. 50 kWweight of the machine ca.: 14 tdimensions of the machine ca.: 6,4 x 3,8 x 3,0 mDocuments: Chip ...

EMCO Hyperturn 45 - CNC lathe - Main spindle equipped with full-clamping cylinder (operation with bar feeder not possible or loading and unloading via automatic. Swivel loader, see video) - Year of construction 2011 Technical data Working Range: - Maximum circumferential diameter over bed: 430 mm - Circumferential diameter over face slide: 300 mm - Maximum turning diameter: 300 mm - Maximum part length: 480 mm - Maximum bar passage: 45 mm - Distance main spindle - counter spindle (spindle lugs): 720 mm Carriage travel range: - Carriage travel X / X2: 160 / 150 mm - Carriage travel Z / Z2 / Z3: 510 / 510 / 510 mm Main spindle (spindle 1): - Spindle connection - DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (inner diameter): 85 mm - Maximum mass inertia for clamping device and workpiece: 0.08 kgm² Main spindle clamping system: - Hollow clamping cylinder ...

turning diameter: max. 356 mmturning length: 705 mmcontrol: M730 UM Mapps CELOSgreates pass round over bed: 920 mmSwing dia. over traverse guideway: 742 mmMain spindle:: turning speed range - main spindle: 4.000 min/-1power capacity - main spindel: 18,5 / 15 kWspindle nose: JIS A2-8 spindle bore: 80 (91) mmC-Axis: 0,001 °Subspindel:: Spindle speed range subspindle: 6.000 min/-1power capacity - Sub spindle: 11 / 7,5 kWspindle bore: 43 mmC-Axis: 0,001 °axis stroke:: x-travel: 260 mmz-travel: 795 mmY - Axis: +/-50 mmrapid traverse ( X / Y / Z ): 30 / 10 / 30 m/minturret:: number of toolpositions: 12 pos.Schank height for square tool: 25 mmDrill shank diameter: 50 mmturret change time: 0,27 sec.Driven Tool Positions:: Spindle speed - driven tools: max. 10.000 min -1power capacity - driven tools: 5,5 / 4,2 kWtotal power requirement: 41 kVAweight of the machine ca.: 6,4 tdimensions of t ...

Technical data: Circumferential diameter: 680 mm Center width: 1000 mm Speed: 2800 1/min Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-speed revolver VDM 40 - C-axis

turning diameter: 390 mmturning length: 507 mmcontrol: MSG 805 MAPPSmax. turning diameter: 390 mmgreates pass round over bed: 680 mmSwing dia. over traverse guideway: 510 mmcentre distance: 618 mmMain spindle:: turning speed range - main spindle: 45 - 4.500 min/-1power capacity - main spindel: 11 / 7,5 kWspindle bearing diameter: 110 mmspindle bore: 73 mmmax. bar capacity: 51 mmspindle nose: JIS A2-6 chucking diameter: 210 mmC-Axis: 0,001 °axis stroke:: x-axis: 235 (195+40) mmz-axis: 520 mmturret:: number of toolpositions: 12 pos.Number of driven toolspositions: 12 pos.Spindle speed - driven tool stations: max. 3.000 min -1power capacity driven tool-stations: 5,9 / 4,5 kWShank height for square tool: 25 mmDrill shank diameter: max. 50 mmturret change time: 0,2 sec.Tailstock:: tailstock adjustment: 490 mmdia. of quill: 85 mmtaper of center: MT 4 quill stroke: 120 mmfeeds:: rapid tr ...

turning diameter: 400 mmturning length: 600 mmcontrol: Turn Plus CNC Pilot 3190 total power requirement: 44 kVAweight of the machine ca.: 5 tdimensions of the machine ca.: 6 2,5 2 mMachine has been in use until now ( 2-axis turning )Known defects:- Driven tools without function- Tailstock leaking - out of service- Sporadic problems hydraulics / leakingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6136 Type: CTX alpha 500 Producer: DMG Gildemeister Created: 2008 Parameters: Control system: Siemens 840 Switch-on hours: 22803 h Hours: 11505 h Maximum turning length: 500 mm Maximum turning diameter: 200 mm Maximum turning diameter over bed: 500 mm Distance between tips: 780 mm Maximum spindle speed: 6000 1/min Maximum workpiece weight: 45 kg Weight: 4500 kg Equipment: Filtration Bar Feeder CNC Spacesaver SS 2500 (2018)

turning diameter: 168 mmturning length: 145 mmtravel -x axis: 130 mmtravel -z axis: 110 mmSpindle Speed: 45 - 6.000 U/min.control: spindle passage: mmspindle bearing diameter: mmbar material dia.: mmtotal power requirement: kWmachine weight ab.: kgrapid traverse x + z axis: 18 / 24 m/minrapid traverse X- and Y-axis: 24 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of Make: 2008 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret V12 (all places driven) Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck (Kitagawa B212)

turning diameter: 660 mmturning length: 1500 mmcontrol: FAGOR centre height: 330 mmspindle passage: 82 mmnumber of spindle speeds: 30-2000 U/minbed width: 390 mmrapid speed: X/Z 4 - 8 m/mintailstock quill diameter: 75 mmMain spindle capacity: 15 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 3800 x 1800 x 2150 mFirst commissioned in 2015, very good condition- FANUC Series 18i TB Control, Manual Guide i Function- Central control panel for machine and CNC control on the pedal arm 45 ° swiveling- 12-fold tool turret- Fanuc drive with 30 kW (50% ED)- Chip conveyor- Bezel- 3 jaw chucksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Siemens Sinumerik 840D Max. turning diameter 280 mm Max. rod passage main spindle 61 mm Turning length 490 mm Speed main/sub-spindle 4700 / 6000 min-1 12-fold revolver with applied revolver Wkz. C-axis Y-axis Parts catcher Workpiece ejector Chip conveyor Various tool holders

turning diameter: 250 mmturning length: 400 mmcontrol: Siemens 840 D swing diameter: max. 300 mmworkpiece length - max.: 400 mmtravel -x axis: 280 mmfeed in x - axis: 0,1 - 30 m/minrapid traverse X-axis: 30 m/mintravel -z axis: 1150 mmfeed range Z-direction: 0,1 - 60000 mm/minrapid traverse Z-axis: 60 m/minspindle bearing diameter: 90 mmspindle head DIN 55026 - Size: A6 turning speeds: 1 - 5000 U/mintool turret 12 times: C4 Captototal power requirement: 45 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 7,0 x 5,0 x 3,2 mCNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyorwith chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor.Without coolant system, was connected to central supply.Machine can be inspected under power.The data for this ad  ...

Inv. Num. : 8904 Type: SB-CNC Producer: SPINNER Created: 1999 Parameters: Maximum turning length: 250 mm Maximum turning diameter: 285 mm Spindle diameter: 42 mm Maximum spindle speed: 8000 1/min Weight: 1500 kg

turning diameter: 250 mmturning length: 400 mmcontrol: Siemens 840 D swing diameter: max. 300 mmworkpiece length - max.: 400 mmtravel -x axis: 280 mmfeed in x - axis: 0,1 - 30 m/minrapid traverse X-axis: 30 m/mintravel -z axis: 1150 mmfeed range Z-direction: 0,1 - 60000 mm/minrapid traverse Z-axis: 60 m/minspindle bearing diameter: 90 mmspindle head DIN 55026 - Size: A6 turning speeds: 1 - 5000 U/mintool taper: Capto C4 total power requirement: 45 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 7,0 x 5,0 x 3,2 mCNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyorwith chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor.Without coolant system, was connected to central supply.Machine can be inspected under power.The data for this ad was creat ...

CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of Make: 2007 Turning length: 1,000 mm Turning diameter: 340 mm Swivel diameter over bed: 530 mm Swivel diameter over slide: 410 mm Spindle bore 72 mm Speed: 45 – 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions (driven) B-turret: 8 tool positions Equipment: Tailstock Transformer Touchsetter Chip conveyor OneTouch IGF

turning diameter: 250 mmturning length: 400 mmcontrol: Siemens 840 D swing diameter: max. 300 mmtravel -x axis: 280 mmfeed x-axis: 0,1 - 30.000 mm/minrapid traverse X-axis: 30 m/mintravel -z axis: 1.150 mmFeed z- axis: 0,1 - 60.000 mm / min.rapid traverse Z-axis: 60 m/minspindle bearing diameter: 90 mmspindle head DIN 55026 - Size: A6 turning speeds: 1 - 5.000 U/mintool turret - number of stations: 12 tool taper: Capto C4 total power requirement: 45 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 7,0 x 5,0 x 3,2 mCNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyorwith chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor.Without coolant system, was connected to central supply.Machine can be inspected under power.The data for this ad was cre ...

CNC lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: BMT 65 Equipment: - Chip conveyors - Parts catcher - Touchsetter - Programmable sub-spindle - Bar feeder prepared - One Touch IGF - 3-Jaw Power Chuck Kitagawa

turning diameter: 400 mmturning length: 730 mmcontrol: FANUC 21i rapid traverse: 15/24 mm/minspindle turning speed range: 4000 U/minspindle motor: 19 kWx-axis: 240 mmz-axis: 640 mmrapid travel (x and z-axis): 18 /24 m/minspindle bore: 66 mmtailstock quill taper MT: 5 tailstock quill stroke: 120 mmtotal power requirement: 50 kVAweight of the machine ca.: 5,5 tdimensions of the machine ca.: 3 x 1,7 x 1,8 m- CNC control FANUC 21i-TB (with Manual Guide I)- hydraulic hollow clamping cylinder- 12-position tool turret, driven tools 4000 rpm, 2.8 kW- Tool monitoring- SMW Autoblok KNCS N225-65 chuck- C-axis (with disk brake for milling operation, Transmit software for end face machining and cylinder interpolation for shell machining)- B-axis- Tailstock (MK 5)- Chip conveyor- Coolant system with high-pressure pump- Parts catcher- Radial and axial milling headsTranslated with DeepL.com (free versio ...

Inv. Num. : 8891 Type: HT 20 RIII Producer: Hitachi Seiki Generated: 2000 Parameters: Maximum turning length: 304.8 mm Max. turning diameter: 203.2 mm Maximum turning diameter over bed: 450 mm Maximum spindle speed: 5000 1/min Travel X: 400 mm Travel distances Z: 600 mm Number of tool positions: 12 Length: 2730 mm Width: 1930 mm Height: 1400 mm Weight: 4600 kg Equipment: Grasshopper Technical documentation Tool Holder Mayfran Chip Conveyor Hainbuch clamping

turning diameter: 420 mmturning length: 600 mmcontrol: Sinumerik 810D spindle turning speed range: 4200 U/minspindle motor: 18 kWspindle bore: 65 mmx-axis: 210 mmz-axis: 610 mmgreates pass round over bed: 600 mmswing diameter over slide rest: 360 mmtailstock travel: 500 mmtailstock quill taper MT: 4 dimension of workpiece: dia 200 x 520 mmtotal power requirement: 20 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3 x 1,9 x 1,9 m- CNC control Siemens Sinumerik 810D- 12-position turret (VDI 30),- Chuck SMW Autoblok dia 220mm- Main spindle- Tailstock (MK 4)- C-axis- Coolant device- suction unit- Chip conveyorMachine has mainly processed plasticThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MEXPOL TUB 830 C CNC lathe was built in 2007 in Germany by MEXPOL Werkzeugmaschinen GmbH. The machine, with its extensive machining capabilities, is an excellent choice for both unit and series production. Workpieces with a maximum diameter of 830 mm are machined inside a large workspace by means of components characterised by the best technical parameters. In order to achieve excellent feed dynamics and repeatability, the X and Z axes are driven by powerful drives of the renowned SIEMENS company. The rigid design of the TUB 830 C x 2250, in turn, eliminates any vibration and oscillation, guaranteeing maximum process stability during even the most intense challenges. The MEXPOL TUB 830C CNC lathe is offered with a wide range of equipment, including an advanced SIEMENS CNC control and a MULTIFIX toolpost. The total weight of the machine is 4930 kg. Technical specifications of the MEXPO ...

turning diameter: 176 mmturning length: 570 mmswing diameter: 510 mmworking diameter: 420 mmtravel -z axis: 570 mmtravel -x axis: 245 mmspindle bore: 43 mmdiameter of quill: 85 mmquill stroke: 120 mmSpindle Speed: 60-6.000 U/min.rapid power traverse in X-and Z direction: 24 m/mintotal power requirement: 5,5 kWcontrol: MSG-805 V weight of the machine ca.: 3.400 kgdimensions of the machine ca.: 2000x1700x1800 mmFeatures/Accessories: - Integrated CNC control- Bed guides and cross-slide guides are induction-hardened and designed as flat guides- Continuously variable AC main spindle drive- Constant cutting speed programming- Cold light lamp integrated into the machine- Power meter for the main spindle drive (ammeter)- Control units for automatic and manual operation, as well as a CNC programming unit and control panel- Tailstock with hydraulically actuated MK 4 tailstock quill- Quill pressu ...

Lathe Pinacho smart turn 6 BJ 2006

: neu : ca. 6 Monate ab Auftragse : Taiwan : 95950 €: 1813.46 €: 630 mm: 2000 mm: 85 mm: 400 mm: 350 mm: D1-8 : 1/16 MK: 3 : 37 - 2250 1/min: 5000 mm/min: 8000 mm/min: 280 mm: 75 mm: 5 MK: 190 mm: 9 / 13.5kW (S1 / S6 40%) kW: X: 0.02 Z: 0.04 mm: X: 0.01 Z: 0.035 mm: ISO3655 : 3840 mm: 1905 mm: 2235 mm: 4200 kgTHREE OPERATING MODES: CNC / TEACH-IN / MANUALSiemens 828D CNC control• 12-inch colour screen• Linear interpolation• Circular interpolation• Helical interpolation• Skip function• Workpiece coordinate system• Coordinate system rotation• Rigid tapping• Mirror image, scaling and rotation• Turning cycle• ShopTurn softwareLarge spindle bore, with precision bearings for high accuracy and consistent cutting stability.Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis.2-axis AC servo motors50-300 mm roller-type ...