CNC Turning Machines used for sale (562)

The machine is in good technical condition, after prior agreement it is possible to test it. Max swing diameter 660 mm Max turned diameter 660 mm Main spindle: Speed ​​range 35-5000 Main drive power 22/15 kW Max torque 349Nm Spindle bore 76 mm Chuck diameter 210 mm Indexing (C axis) 0.0001 Second spindle: Speed ​​range 35-5000 rpm Power (10 min/constant) 18.5/15 kW Max torque 326 Nm Chuck diameter 210 mm Indexing (C axis) 0.0001 Coolant tank capacity 300 l Machine power 66 kVA Operating voltage 400 V / 50Hz Air pressure 5 bar, 500 l/min Control system MAZATROL Fusion 640 MT Flush cooling: Pump capacity 20 l / min Pump pressure 5 bar Accessories Technical documentation, chip conveyor with cooling, magazine for 20 tools B axis (positioned in 0.001, C axis, Y axis Indexing of the rotation position of the second spindle, Synchronization of the main and second spindles Tool pre-settin ...

Technical data Manufacturer: Colchester Model: MASCOT (Electronic Mascot) Machine Type: CNC Lathe Control: GE Fanuc Series 20-T Spindle speed: approx. 20 – 1600 rpm Spindle bore: approx. 74 – 76 mm Turning diameter over bed: approx. 430 mm Turning diameter over slide: approx. 260 – 270 mm Center width: approx. 1200 – 2500 mm Spindle motor power: up to approx. 11 kW Weight: approx. 2.2 – 3.0 t Configuration CNC control Fanuc 20-T Tool holder / turret (typical) Tailstock available Coolant Setup Closed machine enclosure Note The technical data was researched on the basis of publicly available information on the Colchester Mascot series. Original machine documentation was not available. Deviations are possible. Auction-ID: A7-47277-31

Key data: 130 mm, 160 mm, 6000 1/min

CNC lathe ARIX / HUMMER T-42CL + bar loading magazine Robust Nitro + chip conveyor – year of construction 2025 For sale is a modern CNC lathe of the type HUMMER T-42CL (ARIX CNC Machines) including bar loading magazine Robust Nitro. The machine was built in 2025, is in very good condition and is ideal for cost-effective series production. Technical data: Model No.: T-42CL Manufacturer: ARIX CNC Machines (Taiwan) Year of Make: 2025 Spindle speed: up to 6,000 rpm Bar Passage: 42 mm Max. turning diameter: approx. 130 mm Max. turning length: approx. 160 mm Axles: X: 225 mm Z: 235 mm Y: 385 mm Main spindle: Power: 7.5 kW Collet holder: A2-5 Tool Stations: 5 lathe tools + 4 driven tools Total: 8 Lots Machine weight: approx. 3,300 – 3,500 kg Equipment: Bar loading magazine Robust Nitro (automatic material feeding) Live Tooling Suitable for series production  ...

OKUMA CNC Lathe Serial Number: 131693 Power: 45 kW Control: OKUMA OSP-P200L 2 axes + C Diameter on bed: 620 mm Diameter on trolley: 420 mm Distance between points: 1270 mm Chainring: 400 mm Bar capacity: 80 mm Spindle speed: 35–3500 rpm 12-position motorized turret type VDI Fast feeds: X 20 m/min, Z 25 m/min MT5 tailstock Includes chip extractor and presetting Untested operation This item is delivered loaded by truck. The costs of dismantling and loading are borne by the buyer. Auction-ID: A7-47344-11

max. bar Ø: 42 mm Max. speed: 4,500 1/min 8-station turret of which 4 are powered Travel X= 110, Y= 50 mm 2. 8-station turret of which 4 are powered Speed driven tools: 6,000 1/min 1 longitudinal carriage 1 vertical slide Pick-up spindle Chip conveyor IEMCA BOSS 545 Bar Feeder Weight 4100 kg

FANUC CNC Lathe Serial Number: S2-1342 Power: 13 kW CNC Control: FANUC 0i-TA Spindle speed: up to 4500 rpm (max. 6000 rpm) 12-position turret Turning diameter: 180 mm Z-axis travel: 300 mm 160 mm hydraulic plate Bar pitch: 52 mm Coolant capacity: 40 L Suitable for the production of small and medium-sized parts Untested operation This item is delivered loaded by truck. The costs of dismantling and loading are borne by the buyer. Auction-ID: A7-47344-12

The machine is in good technical condition, testing is possible by prior arrangement.

NAKAMURA-TOME Super Mill SC-200LMY precision CNC lathe, equipped with C and Y axes as well as driven tools, allowing combined turning and milling operations. Machine suitable for the production of complex parts in series. Equipped with an LNS Quick Load Servo 2 automatic bar feeder for continuous feed. C-axis (0.001° resolution) Y-axis (± 41 mm) Driven Tools (12 positions) Tool speed: up to 6,000 rpm Tool power: 7.5 / 3.7 kW CNC : FANUC 21i-TB Machine tested under tension Auction-ID: A1-47143-1

Inv. Num. : 9029 Type: TURN E65 Producer: EMCO Created: 2008 Parameters: Control system: FANUC Max. turning diameter: 500 mm Maximum turning diameter over bed: 610 mm Maximum length of travel in the X-axis: 210 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 610 mm Weight: 6500 kg

Equipped with FMB Mini Turbo feed device Auction-ID: A1-46783-42

Lathe Monforts RNC4 1988 and 1995 Lathe Monforts RNC 5 BJ 1992 Lathes Monforts RNC7 BJ 1992 and 1993

Auction-ID: A1-46783-11

CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464.8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Main spindle Speed spindle rpm: 5.000 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Chip conveyor Part catcher Workarea light Bar Loader RBK 10016 Working time hours Potencial nominal kVA: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height  ...

Capacity: Swing over bed: 720mm Swing over saddle: 590mm Max. turning diameter: 481mm Max. turning length: 755mm Bar working diameter: 102mm Spindle: Chuck: Sam Chully MH-212 (305mm) Spindle speed: 2800rpm (belt type) Spindle nose: ASA A2#11 Spindle bearing diameter: 160mm Spindle through hole diameter: 115mm Turret: No. of tool stations: 12 OD tool size: 25mm Boring bar diameter: 50mm Indexing time: 0.15 sec Carriage: X-axis: 260mm Z-axis: 830mm Rapid traverse X-axis: 25m/min Rapid traverse Z-axis: 30m/min Tailstock: Quill diameter: 100mm Quill bore taper: MT#5 Quill travel: 100mm Machine is equipped with: - 2800rpm 35/22kW 1600Nm - Sam Chully MH-212 (305mm) - Live center MT-5 - Part catcher - Axis-Tool Number display - Bar feeder interface - Doosan Tool Load Monitoring - Manuals - Programmable tailstock - Tool setter - 128 Pairs of tool offsets - Part program storage 1 ...

The machine is in good technical condition, after prior agreement it is possible to test it. Control unit Hurco Max Turning diameter 254 mm Turning length 340 mm Range over bed 405 mm Range over cross feed 230 mm Length between centers 403 mm Bar capacity 45 mm X-axis movement 177 mm Z-axis movement 355 mm Spindle speed 6000 rpm. Motor power 11 kW

Voltage: 3 phase 220v Auction-ID: A1-46783-22

Control Winmax Turning diameter 335 mm Turning length 550 mm Spindle speed 3000 rpm Tailstock 12-Station Turret with Driven Tools VDI 40 Chip Conveyor, IRCO Short Bar Feeder IRS-RBK 1001 Tool Measurement Parts catcher

Equipped with feeder FMB type Mini Turbo S Auction-ID: A1-46783-46

CORMAK CK7150LT12x1000 CNC lathe was built in 2025. The machine has only undergone a test run and has never been in operation, it is like brand new. CORMAK CK7 is an extremely versatile machine designed for precision machining of parts made of non-ferrous metals, ferrous metals and non-metals. It is capable of performing operations such as turning of cylindrical, conical and end faces, as well as boring, grooving and threading. Workpieces with a maximum diameter of 500 mm are machined by means of driven tools and a spindle rotating at a maximum speed of 3000 rpm. The machine’s compact design ensures a high degree of stability during even the most intensive challenges, as well as facilitating daily operation and maintenance. All this makes the offered CORMAK CK7150 LT12 CNC lathe the best choice for companies specialising in the machine tool or automotive industry. The total weight o ...

Machine is equipped with: - chip conveyor - part catcher - part conveyor - Powergrip H-08 chuck Auction-ID: A1-47218-13

Inv. Num. : 8997 Type: SKT 100 Producer: KIA Created: 2006 Parameters: Control System: FANUC Series Oi-TB Switch-on hours: 65471 h Hours: 19209 h Max. turning length: 300 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum length of travel in the X-axis: 210 mm Maximum feed in the Z-axis: 330 mm Maximum spindle speed: 6000 1/min Spindle taper: Morse 4 Max. rod diameter: 45 mm Lathe chuck diameter: 165 mm Weight: 3800 kg

Operation unknown Auction-ID: A1-46783-1006

Inv. Num. : 9002 Type: LB3000EXII MYW800 Producer: OKUMA Created: 2014 Parameters: Control system: OKUMA OSP-P300L CNC Switch-on hours: 65458 h Hours: 36054 h Maximum turning length: 785 mm Max. turning diameter: 480 mm Max. turning diameter: 340 mm Spindle diameter: 80 mm Motor power: 22 kW Minimum spindle speed: 45 1/min Maximum spindle speed: 5000 1/min Travel X: 260 mm Travel Y: 115 mm Travel Z: 510 mm Tool magazine: 12 pieces Length: 3330 mm Width: 1800 mm Height: 2250 mm Weight: 5250 kg Equipment: Baking Collets Axis C Sub-spindle Powered tools OSP-P300L Advanced One Touch CF-M-E FILTERMIST FX4002 Suction High-pressure cooling Grips Tool Holder Reducer insert tube In June 2019, the spindle was repaired due to defective bearings. In June 2025, the U4 control unit was replaced. In October 2025, the M control unit w ...

Chuck diameter: 360mm Tooling in turret not included! Auction-ID: A1-47218-11

Key data: 500 mm, 100 mm, 2500 1/min

Special price to be submitted at short notice

Robot, tooling in turret and oilmist filter not included! Auction-ID: A1-47218-18

Inv. Num. : 8996 Type: KIT 450 Producer: HYUNDAI-KIA Created: 2008 Parameters: Control System: FANUC Series Oi-TC Switch-on hours: 54066 h Hours: 23954 h Max. turning length: 190 mm Max. turning diameter: 165 mm Maximum turning diameter over bed: 530 mm Maximum length of travel in the X-axis: 400 mm Maximum feed in the Z-axis: 250 mm Spindle speeds: 6000 1/min Max. rod diameter: 44 mm Spindle diameter: 52 mm Weight: 2700 kg Equipment: Bar Feeder

Auction-ID: A1-46783-8

Inv. Num. : 8995 Type: Masturn MT 550i CNC Producer: Kovosvit Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Max. turning length: 1500 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum spindle speed: 3000 1/min Spindle bore: 82 mm Weight: 3400 kg Equipment: Chip conveyor Cutter head (8 positions)

Equipped with feeder FMB type turbo 5-55 Auction-ID: A1-46783-36

The machine is in good technical condition, after prior agreement it is possible to test it. designed for serial and piece production. It is one of the classic 2-axis CNC lathes (X, Z) with a turret head and is often used in the engineering production of smaller and medium-sized parts. Max. turning diameter: approx. 320 mm Max. turning length: approx. 500 mm Max. diameter above the bed: approx. 500 mm Max. diameter above the slide: approx. 300 mm Spindle Chuck diameter: 210 mm (8") Spindle passage: approx. 52–65 mm Spindle speed: up to 4500 rpm Main motor power: approx. 11–15 kW X-axis: approx. 200 mm Z: approx. 500 mm Rapid traverse: up to 20–24 m/min Turret head 8 or 12 tool positions, possibility of driven tools in the M version Control system Most common: Fanuc 0i-T / Fanuc 21i-T Machine weight approx. 4,000 – 5,000 kg

Auction-ID: A1-46783-43

The machine is in very good technical condition, testing is possible by prior arrangement.

Auction-ID: A1-46783-1

The machine is in very good technical condition, testing is possible by prior arrangement.

Auction-ID: A1-47218-12

Lathe Böhringer DUC 560 BJ 1995

Auction-ID: A1-46783-2

The machine is in good technical condition, after prior agreement it is possible to test it. with Fanuc Oi-TC control and accessories. - maximum turning diameter: 500 mm - maximum turning length: 1200 mm - clamping head 100 mm - swing diameter over the bed: approx. 700 mm - max. spindle passage bar diameter: approx. (75-105 mm) - chuck size: 15" - LM driven tools with milling function (C axis), driven tool motor 7 hp - spindle motor 30 hp - number of tools in the turret 12 VDI - 3-jaw chuck - chip conveyor

Equipped with supply device Quick load servo 2 Auction-ID: A1-46783-37

The machine is in good technical condition, testing is possible by prior arrangement.

Auction-ID: A1-46783-27

The machine is in good technical condition, after prior agreement it is possible to test it. It was put into operation in 2012 with the HEIDENHAIN iTNC 530 control system, including a chip conveyor and a cutter head (8 positions). The machine is fully functional and runs without complications, serviced regularly, originally directly by the KOVOSVIT company and after its demise by the VOPSS company.

Chuck size: 500mm X-axis: 385mm Z-axis: 2070mm Distance in between centers: 2030mm Machine is equipped with: - steady rest - tooling in turret not included Auction-ID: A1-47218-10

CNC lathe DMG MORI ecoTurn 450 With Siemens 840 D SLIMline controller Year of Make: 2016 Max. rotatable diameter: 315 mm Wheelbase: 685 mm Travel X : 224 mm Travel Z : 600 mm Spindle bore: 91 mm Max. spindle speed: 4000 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations C axis , Y axis +/- 50 mm 5 pcs of VDI 40 powered tools 60 VDI 40 tool holders Hydraulic Collet Chuck HAINBUCH with Foot Switch Tool measuring device in the work area Workpiece pick-up device Tailstock with quill Signal light 4 colour Chip conveyor Rinsing gun Coolant device with reinforced pump 20 bar Operating Instructions

Auction-ID: A1-47218-6

CNC lathe DMG MORI NLX 2000 SY/500 With DMG MORI M730 UM MAPPS CELOS CONTROLLER Year of Make: 2016 Max. workpiece diameter: 366 mm Max. workpiece length: 510 mm Travel in X: 260 mm Travel in Z: 590 mm Travel in Y: +- 50 mm Spindle bore: 65 mm Main spindle speed range: 4000 rpm Speed range sub-spindle: 6000 rpm Speed range of driven tools : 10000 rpm With the following accessories: Workroom door with interior lighting 20-fold turret with 20 driven stations C Axis , Y Axis Touch Probe ( Marposs ) Sub-spindle, parts catcher Tool presetter manual ( HS ) Collet Chuck Hydraulic with Foot Pedal (HS) Collet Chuck Hydraulic with Foot Pedal (GS) Bar Feeder LNS Move S2 30 tool holders Various powered tools Direct displacement measuring system X, Y, Z axis Signal lamp 4 colours Chip conveyor Coolant Setup Operating Instructions

Auction-ID: A1-46783-20

Key data: 350 mm, 700 mm

DMG Mori NLX2500SY/700 Manufactured on 2013 and put into operation on 2014. ZAchse: 700mm, Y-axis 100mm, turning diameter approx. 350mm. Spindle passage 70mm. Operation hours 5353 hours only as new C Axis Y axis B axis 3 Powered Wkz Collets feeder extra included Measuring arm Fully equipped See pictures Immediately available

Auction-ID: A1-46783-38