boring mills and machining centers used for sale (3,239)

bore capacity in steel (diameter): 40.0 mmthreading: M 24 throat: 293 mmbore stroke: 120 mmmorse taper: 3 Kurzspindel MKtable:: 515 x 360 mmturning speeds: 80 - 1125 U/minfeed: 0.10 + 0.20 mm/Ucolumn diameter: 115 mmdistance spindle /table: 117 / 701 mmtotal power requirement: 1.0 / 1.6 kWweight: 270 kgheight of the machine: 1840 mmFurnishing:- Lockable main switch with motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP- Infinitely variable speed adjustment- Digital speed display- Feed overload protection- Protection class IP 54- Spindle protection with electrical fuse- Operating instructions in Germanincluding special equipment:- Thread cutting device pos. 20.0 (Thread cutting with stop)- Coolant device B pos. 25.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 18.0 mmthroat: 190 mmbore stroke: 80 mmmorse taper: 2 Kurzspindel MKturning speeds: 225 - 4.300 U/minvoltage: 400 / 50 Hz Volttable:: 300 x 240 mmcolumn diameter: 65 mmengine output: 0.37 / 0.55 kWweight: 110 kgFurnishing:- Large spindle speed range- stepless speed adjustment- machined base plate- Electrically secured spindle protection- Main switch lockable with motor protection switch- Reversing switch for clockwise and counterclockwise rotation- Operating instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32,0 mmarm length: 310 - 820 mmworkpiece height max.: 370 - 870 mmturning speeds: 75 - 1220 U/minspindle taper MT: 4 MKbase plate: 825 x 690 mmthreading: 24 Mquill stroke: 250 mmquill feed: 0,1/0,16/0,25 mm/Utravel x / y: 500 / 510 mmtotal power requirement: 2,25 kWweight of the machine ca.: 1200 kg.range L-W-H: 1470 x 750 x 2100 mmDescription : - Large-sized base plate- ideal for processing large workpieces- Thick-walled, polished column for increased sliding properties of the boom- Extension arm and drill head with independent hydraulic clamping- Simple height adjustment of the extension arm using a lifting motor- Ideal for drilling, countersinking, reaming and thread cutting- Hardened and ground gears, running in an oil bath- Good sliding of the drill head on the boom thanks to the ground surfacescope of delivery : - Cube table- Reducing sleeves MK 5 ...

bore capacity in steel (diameter): 50,0 mmarm length: 350 - 1.590 mmworkpiece height max.: 645 - 1.240 mmturning speeds: 25 - 2000 U/minspindle taper MT: 5 MKbase plate: 980 x 1.600 mmthreading: 42 Mquill stroke: 320 mmtotal power requirement: 4,0 kWweight of the machine ca.: 3.500 kg.range L-W-H: 2450 x 980 x 2840 mmDescription : - Large-sized base plate- ideal for processing large workpieces- Thick-walled, polished column for increased sliding properties of the boom- Extension arm and drill head with independent hydraulic clamping- Simple height adjustment of the extension arm using a lifting motor- Ideal for drilling, countersinking, reaming and thread cutting- Hardened and ground gears, running in an oil bath- Good sliding of the drill head on the boom thanks to the ground surfacescope of delivery : - Cube table- Reducing sleeves MK 5/4, MK 4/3, MK3 / 2- LED machine light- First fill ...

bore capacity in steel (diameter): 60,0 mmarm length: 350 - 1.600 mmworkpiece height max.: 665 x 1.250 mmturning speeds: 38 - 2.000 U/minspindle taper MT: 5 MKbase plate: 960 x 1.760 mmthreading: 42 Mquill stroke: 325 mmtotal power requirement: 4,0 kWweight of the machine ca.: 3.800 kg.range L-W-H: 2.600 x 1.100 x 2.770 mmscope of delivery :- Cube table- Drill chuck arbor MK 5 / B 16- Reducing sleeves MK 5/4, MK 4/3, MK3 / 2- LED machine light- First filling with Shell Tellus 46- coolant device- Frequency converter- Digital speed display- lift motor- hydraulic motor- Height-adjustable protective cover- operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32,0 mmthroat: 255 mmbore stroke: 120 mmmorse taper: 4 MKtable:: 385 x 335 mmturning speeds: 80 - 2130 U/mintotal power requirement: 1,1 / 2,2 kWweight: 125 kgrange L-W-H: 460 x 900 x 1730 mmFurnishing:- Surface-machined work table- Height adjustable via rack and hand crank- Ground base plate with T-slots for clamping high workpieces- V-belt drive with balanced drive pulleys for smooth running- Adjustable drilling depth stop for precise infeed of the quill- Powerful 2-stage motor, speed range from 80 - 2130 rpm- Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery- Cross line laser device for comfortable work- Compact, stable cast iron construction in a modern design- Stable and polished steel column, designed for heavy useScope of delivery:- Drill chuck arbor MK 4 / B 18- Keyless chuck 1 - 16 mm / ...

bore capacity in steel (diameter): 25.0 mmthroat: 255 mmbore stroke: 120 mmmorse taper: 3 MKturning speeds: 105 - 2900 U/mintable:: 395 x 420 mmcolumn diameter: 100 mmthreading: max. M10 voltage: 400 / 50 Hz Vweight: 140 kgrange L-W-H: 500 x 570 x 1100 mmFurnishing :- Keyless chuck 1 - 16 mm / B 16- Drill chuck arbor MK 3 / B 16- Reducing sleeve MT 3/2, MT 3/1- Digital drilling depth display- Automatic tool ejector- Right-left rotation device- Height-adjustable protective coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 32.0 mmbore capacity in cast iron: 35.0 mmmorse taper: MK 3 spindle stroke: 120 mmthroat: 260 mmcolumn diameter: 110 mmtable:: 515 x 355 mmturning speeds: 80 - 1400 U/mintotal power requirement: 0.7 / 1.3 kWweight: 175 kgrange L-W-H: 750 x 520 x 1820 mm from a training workshop maintained condition ()Furnishing:- V-belt operated column drilling machine- adjustable drilling depth stop- Pole-changing drive motor- manual spindle feed via cross handle- Work table with 3x T-slots- Table height adjustment via hand crank- Front main switch- Connection cable including 16A plug Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9103754The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 23.0 / 28.0 mmBoring depth max.: 140 mmCenter of spindle to wall or column: 300 mmColumn diameter: 125 mmSize of table plate: 415 x 385 mmSpeed: 100 - 2000 U/min.spindle taper MT: 2 MKvoltage: 380 VMotor output: 0.9 / 1.4 KWweight of the machine ca.: 225 kgDimensions (L/W/H): 900 x 600 x 1960 mm maintained condition ()Furnishing:- V-belt operated column drilling machine- Right/left running of the work spindle- Pole-changing drive motor- manual spindle feed via cross handle- Work table with 2x T-slots- Table height adjustment via hand crank- machined base plate with 3x T-slots- manual V-belt tension (front handwheel)- Connection cable including 16A plug Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9103760The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40.0 mmbore capacity in cast iron: 50.0 mmthroat: 300 mmbore stroke: 160 mmmorse taper: 4 MKtable:: 615 x 430 mmthreading: 24 in ST Mthreading: 30 in GG Mturning speeds: 100 - 1.800 U/minfeed: 0.1-0.2-0.3-0.4 mm/Udistance spindle /table: 147 / 688 mmtotal power requirement: 0.6 / 1.8 kWweight: 470 kgheight of the machine: 1865 mFurnishing:- Electromagnetic feed clutch- with overload protection and electrical cross-handle switch- Lockable main switch- Motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel- Infinitely variable speed adjustment- Digital speed display- Protection class IP 54- Spindle protection with electrical fuse- Motor insulation class F (155 degrees)- Operating instructions in German including special equipment:- LED machine light pos. 12.- Thread ...

bore capacity in steel (diameter): 40,0 mmthroat: 320 mmbore stroke: 160 mmmorse taper: 4 MKtable:: 505 x 425 mmswivelling +/-: 50 GradT-slots: 14,0 mmturning speeds: 90 - 1455 U/minquill feed: 0,1/0,2/0,3 mm/Ucolumn diameter: 120 mmtotal power requirement: 1,0 / 1,5 kWweight of the machine ca.: 380 kg.range L-W-H: 500 x 930 x 1870 mmcharacteristics- Vario drive for precise setting of the speed- Quill infeed either by hand or by mechanical feed- Easy tool change thanks to automatic tool ejector- Set speed can be read quickly and easily using the digital display- Solid, swiveling gray cast iron table with T-slots and coolant channel- The coolant system and lighting are included in the scope of delivery- Adjustable drilling depth stop, drilling depth can be read off using a scale- Right-left rotation device for thread cuttingscope of delivery- Drill chuck arbor MK 4 / B 16- coolant device- ...

Key data: 50 mm, 335 mm, 280 mm

Power: 7.8 kW Weight: 1,650 kg Table size: 630 x 500 Speed: 45 - 1,000 rpm Machine is ready for operation and can be dispensed immediately.

Key data: 450 mm, 270 mm, 310 mm

Chiron FZ08KS Magnum, NC machine: 3-axle Workbench: Length [mm]: 770, Width [mm]: 290 Table information: Rigid table with chip tray for optimal chip fall for wet and dry machining Clamping area: 770mm x 290mm with raster drilling pattern M16 x 15H7 x 50mm Table load: max. 500 kg Rapid traverse: X and Y axis 40m/min, Z axis 60m/min Max. speed [rpm]: 1500 Dimensions/Weight: Length [m]: 2,308, Width [m]: 1,405, Height [m]: 2,447 Total weight [Kg]: 3400 Electronics: Control Type: Siemens CNC Control 84OD PCU 50 / NCU 572.4, 6 measuring circuits, 1 channel incl. 10.4" TFT color screen / full keyboard OPO10S Windows NT Control Panel Logic NO RAM 256KB Machine connection: Voltage [V]: 400 / 230V t 107o - 50Hz/N/PE Frequency [Hz]: 50/60Hz Type of current: three-phase current Power: 13kVA Remark Accessories: Pressure monitoring of internal cooling

Key data: 630 mm, 400 mm, 500 mm

Chiron FZ 18 W, NC machine: 5-axis machine Interference circle diameter [mm]: 630 with variaber Wz alternating plane Plate size: Workpiece changing device 0 / 180° weight-dependent, Self-regulating thanks to self-learning speed control Transport load per side Ø - max. 400Kg with stainless steel centre partition Clamping area 2 x 940 x 470mm² with threaded and fitting hole grid: M16x Ø 15H7x50mm Workpiece change time: approx. 3.7sec. weight-dependent, Self-regulating thanks to self-learning speed control Workbench: Two-axis NC rotary table Type ATU 200/AWU 160, Fabr. PEISELER Face plates Ø 180mm with centering hole A50 + Ø 012 Fixing pin Ø 16H7 and 4x M10 in bolt circle 104.8 Center height 174mm with horizontal axis of rotation Dimension to upper edge of face plate with vertical axis of rotation 263mm Sub-range 5, axis 360° continuous, 4th axis 0-90° S ...

Key data: 450 mm, 270 mm, 310 mm

Chiron FZ08K S Magnum Work table: length 770mm, width 290mm (clamping surface) Rigid table with chip tray for optimum chip fall during wet and dry machining. With raster drilling pattern: M16 x diameter 15 H7 x 50mm Rapid traverse: 75m/min in X, Y and Z axis Max. speed [rpm]: 3000 Dimensions/Weight: Length [m]: 2.308, Width [m]: 1.405, Height [m]: 2.447 Total weight [Kg]: 3400 Electronics: Control type: Siemens CNC control 840D (PCU 50 / NCU 572.3, 6 measuring circuits, 1 channel) incl. 10.4" TFT color screen/full keyboard OP010S Control Panel Logic Windows NT/XP Machine connection: Voltage [V]: 400 / 230 + 6% / -10% - 50Hz/N/Pe Frequency [Hz]: 50/60Hz Type of current: three-phase current Power: 14kVA

spindle diameter: 200 mmx-travel: 16200 mmy-travel: 5250 mmz-axis: 1600 mmw-axis: 1990 mmspindle turning speed range: 0,9 - 930 U/minfeeds: 6000 mm/minrapid traverse: 6000 mm/mindimension of the ram: 520 x 520 mmmain drive motor: 77 kWControl: Heidenhain TNC 530 tool taper: ISO 60 total power requirement: 180 kVAweight of the machine ca.: - tdimensions of the machine ca.: 20 x 12 x 8 m2008 modernised with new electrics, motors and controlsequipped with:- Control Heidenhain TNC 530- Rotary Table SEA60 3500 x 4000mm, 60t- coolant system- chip conveyor- angular milling head- without floor platesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OKUMA MX55 Control: OSP700M Machine hours (spindle running time): 26,889 Accessories: various tool holder BT50; 4. Axis Partial Attachment

Key data: 2 mm, 425 mm, 400 mm

Machining Center (Vertical) CNC TYPE: SW BA25 Control: Siemens 840 C Travel X/Y/Z: 2 x 600 or 1 x 1,800 / 425 / 400mm Main spindle: SK40 / 7,500 rpm /106 Nm / 14kW / IKZ Rapid traverse: 40 m/min Tool changer: 36-speed Dimensions W/H/D: 5,100 / 3,000 / 2,900 mm Weight: 9,500 KG Equipment: Single or two-station with shuttle operation Left side with controlled 4th axle and hydraulic double clamp Right side 2x hydraulic double clamp Separate hydraulic unit for increased clamping pressures under manual clamping Can be reclamped to program-controlled voltage via central hydraulics Conveyor Coolant device with gap filter and high-pressure pump for internal coolant supply Prepared for Renishaw touch probes

bore capacity in steel (diameter): 32 mmthroat: 325 mmbore stroke: 170 mmtaper MK: 3 MKtable-size: 560 x 480 mmfeeds: 0,1 - 0,16 - 0,25 mm/Uturning speeds: 60 - 1400 U/mintotal power requirement: 1,8 KWweight of the machine ca.: 0,55 tdimensions: 1,2 x 0,8 x 2,1 mPillar drill with:- Feed- Variable spindle speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 100 mm, 500 mm, 480 mm

Manufacturer: Brother Type: Speedio W-1000 XD1 Commissioning: 2024 Control type: CNC D00 and plain text dialog programming Axles: 4 X-travel: 100 mm Y-travel: 500 mm Z-travel: 480 mm + stand elevation 150 mm 4.Axis 360° Spindle speed: 16 -16000 rpm Spindle adapter cone: BBT-30 (BT-30) Tool stations: 21 (high-speed tool changer) Optional extras: Internal coolant supply 15 bar with self-cleaning pre-filter system Coolant tank 150 litres "Twin" chip disposal system for coarse and fine chips incl. filter system Automatic side door for robot loading Emulsion mist extraction for working area 700 m³/h CNC rotary table Brother T200 Ad.L clamped with counter bearing 2 x rotary union 4-flow Workpiece clamping hydraulic 80-210 bar Tool breakage monitoring Renishaw Laser Robot interface Part clamping control via differential pressure sensors (2-fo ...

x-travel: 3.000 mmy-travel: 1.000 mmz-travel: 860 mmControl: Heidenhain iTNC-530 table-size: 3.600 x 1.050 mmT-slots: 7 x 18 T - slots distance: 125 mmdistance table - lower edge spindle: 25-366 mmtable weight: 4.200 Kgb-axis: +-105 °c-axis: +-360 0rapid travel x/y/z: 30.000 mm/minrotary table: Durchm. 1.000 mmmax. turning diameter: 1.400 mmnumber of spindle speeds: 9.000 U/min/rpmtool taper: ISO-50 DIN 69871-AD spindle drive: 28,5 kWmax. torque on the spindle: 240 Nmtool change unit: AITEK, 40 fach: 20 handwheel: Ink. Shuttle operation: Inkl Chip coveyor: Ink. Internal cooling system: 20 bartotal power requirement: 65 kWweight of the machine ca.: 24,8 tdimensions of the machine ca.: 8.056 x 5.496 x 3.790 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm

Machine Type: CNC Machining Center/Milling Machine Manufacturer: AXA Type: VSC0-500 Year of Make: 1989 Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-AXA-0825 DESCRIPTION We offer you a used CNC machining center from the manufacturer AXA. Available from week 37 / 2025. - Fourth axle - Tool holders - Plenty of spare parts and fourth axle from a sister machine Machine weight 3t more technical data will follow! Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

x-travel: 2500 mmy-travel: 2500 mmz-travel: 1700 mmcontrol: Siemens Sinumerik 840 D max. workpiece weight: 6000 kgspindle diameter: 130 mmquill stroke: 700 mmtool taper: ISO 50 DIN 69871 - AD max. torque at the spindle: 1847 Nmtotal power requirement: 65 kWweight of the machine ca.: 45 tdimensions of the machine ca.: 10,9 x 9,3 x 5,7 mWork table -Clamping surface 2500 x 2000 mm -Table height above floor 800 mmFeed speed -x-axis 0.5 to 10000 mm/min -y-axis 0.5 to 10000 mm/min -Z-axis 0.5 to 10,000 mm/min -Rapid traverse (x/y/z) 25 / 25 / 25 m/min -Max. feed force (x/y/z) 28,000 / 27,000 / 28,000 N Spindle speeds in rpm -Gear stage 1: 6 to 1004 rpm -Gear stage 2: 950 to 4000 rpmEquipment/accessories: -Approx. 30 SK 50 tool holders -1 measuring probe -Coolant system/paper belt filter & chip conveyor -Cooler -Oil mist extraction -Fixators -T ...

Key data: 830 mm, 630 mm, 630 mm

Year of manufacture 2004 Heidenhain 530 (MC422) Spindle hours approx. 17500 32 Fold Tool Changer Working area 830 x 630 x 630 mm Feeds 15000 mm/min Rapid traverses 30000 m/min Tool holder Motor spindle 12000 rpm IKZ, chip conveyor, el. Handwheel, Heidenhain Button, Blum Laser, Rinsing device, filter system Weight approx. 9000 kg

Travel path X/Y/Z: 630mm/630mm/560mm, tool holder: HSK-63A, tool positions: 60, pallets: 2, pallet dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 6600mm/6000mm/3200mm, weight: approx. 18000kg, control: Siemens Sinumerik, operating hours: approx. 24152. The machine has a system error - Runtime Error 285, Application oem4421 - and the PLC does not start up. Documentation available. An on-site inspection is possible.

Pallet dimensions X/Y: 630mm/630mm, max. table load: 2x1200kg, travel path X/Y/Z: 1000mm/800mm/850mm, spindle speed: 5000rpm, spindle taper: BT50, spindle power: 15kW, tool positions: 60, rapid traverse: 15m/min, feed rate: 5m/min. Machine dimensions X/Y/Z: approx. 5400mm/3600mm/2900mm, weight: approx. 17500kg, control: Tosnuc T-800M. Documentation available. An on-site inspection is possible.

Drilling capacity: 35mm, drill spindle taper: MT4, quill stroke: 285mm, reach: 300mm-1000mm, speed: 2500rpm, arm length: 500mm, spindle-to-base plate distance: 1000mm, base plate dimensions X/Y: 1150mm/780mm. An on-site inspection is possible.

Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.

Offer 25251 Specifications: - Drilling capacity in steel ST 60 45 mm - Drilling capacity in steel ST 60 55 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1600 rpm - Right - Counterclockwise rotation - 3 Feeds electr. Magnetic indentation 0.1; 0,16; 0.25 mm/rev - Projection 360 mm - Max distance drilling spindle – table / base plate 775 / 1255 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 2.7 / 4.0 kW - Space requirement approx. W 800 x H 2100 x D 980 mm - Weight approx. 750 kg - with: - Machine vise - Keyless chuck 1 - 13 mm - Emergency stop button -Lighting

x-travel: 750 mmy-travel: 785 mmz-travel: 600 mmcontrol: FANUC I-Series : : 12000 min/-1: 22/18,5 kWtool taper: BT 40 : 204 Nm: table surface area: 650 x 600 mmmax. table load: 600 kg: -120 / +120 °tool magazin:: : 40 pos.max. tool weight: 8 kgmax. tool diameter: 75 mmmax. tool-dia with free toolbox: 125 mmmax. workpiece length: 300 mmfeeds:: rapid traverse: 45 m/min: 4,5 kNmax. workpiece diameter: 840 mmworkpiece height max.: 500 mmtotal power requirement: kVAweight of the machine ca.: 14,5 tdimensions of the machine ca.: 3,7 x 2,5 x 3,1 m- CNC Control FANUC I-Series (F31i)- 5- Axis simultanous- Swivelling Rotary Tabe- Chip Conveyor- Coolant- ATC 40 (BT 40)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.