boring mills and machining centers used for sale (3,240)

- Work piece up to 1530 x 1295 x 3500 Kg- Tool size up to 650 mm length and 30 Kg- Tool size up to 400 x 250 mm and 30 Kg- Extende feed rate up to 15 kN-100% ED- Coolant Filtration   - BLUM Laser NT- 3D Quick ser- MPC protection- 3D Measuring probe- DXF Import - Tool package 180 Tool HSK-100A- 2 x Cast iron angle plates 1500 mm - 15000 Working hours- 1e owner machine 

- 5 Axis Manufacturing cell with automation LANG 20 positions- Renishaw 3D Taster with pre-setter ball- LANG Preperation system with  vacuum- 25 Units LANG pallet with vice / clamp / chucks- Only 7155 Working hours !- New EUR 500.000

- NC Rotary table 1250 mm with 50 Rpm- Full C-Axis  360.000 with HIGH TORQ Drive- HSK-100 with 90 kW and 15.000 Rpm- 5 Axis simulteneous package- Last service in 2023 

- Spindle speed 10.000 Rpm- Coolant tank with IKZ 20 bar- Chip conveyor

- Full enclosure with vacuum extraction- Roller shutter door for crane loading- Pick-Up station for 3 angled milling head - Face machining possible to generously sized areas- Distance spil to table 140 - 740 mm- Pendel screen for splitted manufacturing- Coolant tank filtration 350 Liter- HR410 Handwheel HeidenHain- Double LTA Oil Mist -  Flexible, high-precision machining of large and complex parts, with reliable German build quality.

- Renishaw measuring probe MP-12- IKZ 15 Bar- Interface set- Performabnce software package- Monitoring B prepared not included

- Horizontal work load 200 Kg- Vertical work load 100 Kg- Torq 407 Nm- Runout 0.025 mm- Gear Ratio 72:1- Timing 2:1- incl. Tailstock MK 4- incl. Driver- incl. Cable  

 - Build with double hirth coupling- T slot 22 with Jump off 200 mm- Diameter off center hole 50 mm

- Portable / Transportable with levelling schoes AWF Fixatoren- ROD Heidenhain indexing scale with Dro - Left and Right rotation in 3 indexing feed rates- Power 18 kW- Quick posititining fixed angle 0-90-180-270 Gr

Key data: 730 mm, 850 mm, 560 mm

5-axis Vertical Machining Centre CNC Control Mazatrol Fusion 640 M 5x Table size 500x500 mm Table load 500 kg Number of pallets 12 (PMC) Max workpiece Ø 730x500 mm Movement X/Y/Z-axis 730-850-560 mm C-axis (table rotation) 360° A-axis (table tilt) +30/-120 Spindle speed 35-10,000 1/min Spindle Taper Big Plus BT50 Spindle motor 30/22 kW Magazine capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Key data: 800 mm, 450 mm, 510 mm

Doosan DNM 4500 Vertical Machining Center (VMC) Year of construction: 2016 Condition: Used – in very good working condition Well-maintained Doosan DNM 4500 vertical machining center, ideal for precision milling and general machining. Technical specifications: X-axis travel: 800 mm Y-axis travel: 450 mm Z-axis travel: 510 mm Rapid traverse (X/Y/Z): 36 / 36 / 30 m/min Spindle speed: up to 8,000 rpm Spindle power: 18.5 kW Spindle torque: 117.8 Nm Tool changer: 30 positions Table size: 1,000 mm Max. workpiece weight: 600 kg Machine weight: approx. 5,000 kg The machine has been regularly maintained and is in good condition. Inspection under power is possible.

Key data: 3000 mm, 800 mm, 800 mm

For sale Matec vertical machining center type 30 HV. Equipped with a Heidenhain and TNC 530 controller. This machining center also has a swivel head: 1-axis swivel head, infinitely variable, +/- 105°. Equipped with a chip conveyor with left ejection, and high pressure pump with fine filter installation. In very good condition. With machine clamps and tool holder SK-40 holder.

Key data: 435 mm, 465 mm, 560 mm

Matsuura MX-330 - PC10 Vertical 5-axis machining center CNC control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Number of pallets 10 Max. workpiece diameter x height 330 x 300 mm X-axis travel 435 mm Y-axis travel 465 mm Travel Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15,000 rpm Spindle holder MAS BBT 40 Spindle motor 7.5/5.5 kW Magazine capacity 90 If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

x-travel: 2900 mmy-travel: 1000 mmz-travel: 700 mmcontrol: Heidenhain total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 630 mm, 620 mm, 710 mm

ÖKK HP 500S CNC Horizontal Machining Center CNC Control Fanuc 160is-MB Pallet table size 500 x 500 mm Number of pallets 2x Table load 400 kg X-axis travel: 630 mm Y-axis travel: 620 mm Travel Z-axis: 710 mm Table Indexing 0.001° Spindle Heads MAS BBT40 Spindle speed 100 - 12,000 1/min Spindle drive 11/7.5 kW Number in Stacks: 60 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock. We are selling this machine at a special price, called "as seen". This means that we do not check the condition of the machine.

x-travel: 450 mmy-travel: 400 mmz-travel: 400 mmcontrol: Heidenhain Mill Plus V600 total power requirement: kWweight of the machine ca.: 7000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1660 mm, 510 mm, 510 mm

For sale: Mazak vertical machining center type VTC-20C with a Mazatrol M Plus controller. X, Y and Z axis movement is 1660 x 510 x 510 mm. Table size. 2000 x 510 mm. Speed range 40 -7,000 rpm. Spindle holder ISO-40. The machining center is equipped with cooling by the spindle. Tool changer with 2 x 24 positions. The machining center is still in good condition. Still to be seen under power, intermediate sale reserved

Key data: 730 mm, 730 mm, 740 mm

Mazak PFH 5800 (10 Pallet) CNC Horizontal Machining Center CNC control Mazatrol 640M Pallet table size 500 x 500 mm Number of pallets 10 Table load 700 kg X-axis travel 730 mm Y-axis travel 730 mm Z-axis travel 740 mm Table indexing 360 x1° Spindle taper CAT 40 Spindle 12,000 1/min Spindle motor 22/15 kW Magazine capacity 80 Required footprint 9850 x 10145 mm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Key data: 730 mm, 730 mm, 740 mm

Mazak HC Nexus 5000-ll CNC Horizontal Machining Center CNC Control Mazatrol Matrix Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 KG Travel X-Y-Z axes 730x 730x740 mm Table Indexing 0.001° Spindle taper DIN 69871A-40 Spindle speed 18,000 1/min Spindle motor 35-26 kW Mazgazin capacity 80 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Key data: 1050 mm, 510 mm, 560 mm

Mazak MTV 515/40N CNC Vertical Machining Center CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg X-axis travel range: 1050 mm Y-axis travel range: 510 mm Z-axis travel range: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 - 6000 1/min. Magazine capacity: 30 positions Machine weight: 8900 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

x-travel: 1250 mm mmy-travel: 1000 mm mmz-travel: 600 mm mmControl: total power requirement: 25 Kw kWweight of the machine ca.: tdimensions of the machine ca.: mBrand TosMachine no F641Type SPEEDtecCNC Brand SiemensCNC Type Sinumerik 840DYear of make 2009X 1.250 mmY 1.000 mmZ 600 mmIntake HSK 100Engine power 25 kWSpeed 12000 RPMTool changer Number of pallets 4Outgoing ram Including manuals Speed maximum 12.000 RPMMaximum pallet load 4.000 kgChip transport Tool magazine positions: 2x 40 , HSK 1004 tables, 1x 1.000 x 1.250mm / 3x 1.000 x 1.000mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 30 mm, 1500 mm, 1

Deep hole drilling machine SIG

Key data: 1120 mm, 510 mm, 510 mm

For sale. Mazak vertical machining center type VTC-20B with Kitagwa integrated rotary axis. X-, Y- and Z-axis travels are 1,120 x 510 x 510 mm. Table size: 1410 x 510mm. Table capacity: 800Kg. Maximum speed is 6,000 rpm. SK-40 spindle holder. The number of tool positions is 24 pieces ATC, max. tool Ø / max. tool Ø 80 mm ditto for free places / max. tool Ø with free places besides 110 mm max. tool length 350 mm max. tool weight 8 kg Feed range xy / feed range xy 1-8000 mm/min. Vorschubbereich z / feed range z 1-8000 Mm/min. Rapid traverse X/Y / rapid feed X/Y 30 m/min. Drive power / drive capacity 15 kW Weight of the machine approx. / weight 6500 kg

Key data: 710 mm, 610 mm, 660 mm

Mazak FH 5800 with 10 Pallet Palletech Horizontal machining centre with Palletech CNC control Mazatrol Fusion 640M Pallet table size 500 x 500 mm Number of pallets 10x Table load 500 kg X-axis travel 710 mm Y-axis travel 610 mm Travel Z-axis 660 mm Indexing of the table 360 x 1° Spindle taper DIN 69871A Spindle speed 35 - 15,000 rpm Magazine capacity 120 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Key data: 3300 mm, 2300 mm, 1000 mm

Control Siemens 840D Table size 3,500 x 1,250 mm X-travel (longitudinal) 3,300 mm Y-travel (cross) 2,300 mm Z-travel (vertical) 1,000 mm Spindle HSK 100 Rapid traverse X-axis 25m/min Rapid traverse Y-axis 40m/min Workpiece weight 9.000 kg R.P.M. 100 – 12,000 kW 70 Volts 400 Cycles 50 Including: Automatic Tool Changer 60 tools Rotating B - C axis head: B-axis +/- 95 degrees – C-axis +/- 190 degrees.

Control Heidenhain TNC 426 Mach.no. 11648 Table 1,600 x 1,250 mm Spindle diameter 130 mm Taper ISO 50 Cross travel (X) 2,000 mm Vertical travel headstock (Y) 1,600 mm Longitudinal travel (Z) 1,050 mm Horizontal spindle travel (W) 850 mm RPM 4 – 1,120 kW 45 Volts 380 Cycles 50 Including: Machine weight 26,3 ton

Heidenhain TNC 426 Table 1600 x 2000 mm Max. load 12.500 kg Spindle diameter 130 mm Taper ISO 50 Cross travel (X) 3,500 mm Vertical travel headstock (Y) 1,600 mm Longitudinal travel (Z) 1,250 mm Horizontal spindle travel (W) 850 mm RPM 4 – 1,120 kW 45 Volts 380 Cycles 50 Including: Facing head Ø 720 mm Facing head slide travel 240 mm Machine weight 31,1 ton