other machines for plastic used for sale (418)

Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 500 mm - max. cutting length: 3000 mm - hydropneumatic feed - vertical and horizontal pneumatic profile mounting

Year: 2007 - technically efficient, ready to work - after full service - pneumatically operated rotary table -90°/0°/+90° - working range: 200 x 240 x 2500 mm - 4 kW motor - speed ​​control (inverter) - 2 electronic position indicators - pneumatic profile clamping - cooling and lubrication system - copying template

- technically efficient, ready to work – after full service - motor: 0.55 kW - working range: 410 x 110 mm - pneumatic profile clamping - pressure reducer

Year: 2013 - technically efficient, ready to work – after full service - 4 spindles - internal rebate support, resulting in fewer milling unit adjustments - simultaneous milling of 2 offset, length-adjustable water slots in 2(3) planes - selection of milling units for the right or left end of the profile bar using a two-handed switch - selection of unit for visible or hidden drainage using a manual switch - adjustment of units to milling position using handwheels and adjustment aids - two-handed operation

Calender

- technically efficient, ready to work – after full service - adjustable leg height - working length: 3500 mm - roller width: 240 mm

- technically efficient, ready to work – after full service - adjustable leg height - working length: 3500 mm - roller width: 240 mm - measurement reading scale - manually adjustable stop + locking lever

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

Year: 2006 - technically efficient, ready to work – after full service - screwdriver - automatic screw feeding system - tilting table top - fittings punch (straight cut)

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

Year: 2014 - technically efficient, ready to work – after full service - motor: 2 x 0.75 kW - pneumatic clamping of the strips - discs with undercutting cutters (2 x 250 mm, 2 x 150 mm) - glass simulator – lateral strip support – stepless (adjustable with a crank and counter) adjustment of the simulator position - manual height adjustment of the work table

Year: 2015 - technically efficient, ready to work – after full service - two pneumatically tiltable beams (retaining and pressing) - through-feed - adjustable height: 500 mm (liftable) - adjustable vertical angle from 0 to 7 degrees - working width: 3500 mm

Year: 2008 - technically efficient, ready to work – after full service - automatic screw feeding system - pneumatic control - base - infeed and outfeed rollers

ECONOMOS IP 4000 Seal Jet CNC lathe for seal production was built in 2000 in Austria by ECONOMOS AUSTRIA Gesellschaft m.b.H. The machine is designed for the production of technical gaskets and sealing elements of various dimensions and profiles. The advanced SEAL-JET technology enables the rapid production of both single parts and short series with high dimensional accuracy and repeatability. The ECONOMOS ECONOM IP 4000 Seal Jet lathe for gasket production is distinguished by its sturdy, welded design with integrated chip trough. Machining is performed by a main spindle rotating at a maximum speed of 3000 rpm. The spindle, guided in precision bearings and encased in a rigid grey cast iron body, ensures high machining stability even under heavy loads. The integrated cooling system effectively dissipates the heat generated during machining, maintaining optimum working conditions through ...

Year: 2006 - technically efficient, ready to work – after full service - flash limit: 2 mm - angle range: 30-180 degrees - large heater - side supports - air preparation station

Year: 2009 - technically efficient, ready to work – after full service - pneumatic clamps - cutting at 45° - two cutting discs: 225 mm + two scoring blades - measuring slider

WEGENER BM 301 plastic bending machine was built in Germany by Wegener International GmbH. The machine was regularly maintained and upgraded throughout its service life. In 2022, a general overhaul was carried out at the machine manufacturer. WEGENER BM 301 is the perfect choice for precision forming of thermoplastic sheets made of, among others, PVC, PC/ABS and PMMA with a maximum thickness of 15 mm and a width of 3050 mm. The machining process is performed by means of heating elements in the form of a lower flat strip and an upper V-shaped strip, which heat the material at a controlled temperature to a plastic state. The material is then bent to the desired angle between 0° and 110°. The use of the highest-quality heating elements ensures efficient and even heating of the material along the bending line. They are moved manually along hardened steel rollers. Repeatable positioni ...

Used SJ 50/30 filament production line equipped with an air-cooled head. Technical parameters: - screw diameter 55 mm - L/D 30, effective screw length 1500 mm - Screw rotation speed: 60 rpm - forced feed unit for raw material to the plasticizing system with a power of 1.5 kW / vertical screw system with cylinder . - Main drive motor power 12 kW - capacity approx. 50 kg/h Heating sections and power : - Cylinder 6 kW / three heating sections plus head - Head connector / mechanical screen exchanger with a power of 2 kW - Air cooling of the cylinder and head / motor with a power of 0.18 kW - Raw material: PP/PE ABS/PLA/PETG plastics Weight approx. 800 kg.

Year: 2006 - technically efficient, ready to work – after full service - flash limitation: 0.2-2 mm - maximum welding length: 2600 mm - support arms - PLC controller

Used plasticizing system, diameter 120 mm. Technical parameters: - screw diameter 120 mm - barrel diameter 120 mm L/D 33 mm - 6 heating sections/heaters with a power output of 4300 W - complete set of fans with housings - double degassing section - complete power supply for heaters and fans. The plasticizing system is in good condition, with a capacity of approximately 400 kg/h.

Year: 2011 - technically efficient, ready to work – after full service - WT 535B automatic rotary station - disc cutter: 250 mm - windows PC control - profile recognition system - for turning tools on and off as needed - extensive tool equipment

MEGAPLOT XTR PRO 1200 CNC foam cutting machine was built in 2020 in Poland by Megaplot J.Wójcicki M.Jagła SJ. The machine enables precise cutting of any shape in a wide range of rigid foams, soft foams and rockwool. Cutting is performed fully automatically by means of an endless wire, which accelerates to a speed of 280 km/h. Project files, including shapes and their layout, can be prepared in any graphics program (CorelDraw, AutoCAD etc.). This is because the advanced FastWire software supports all major file formats. The MEGAPLOT XTR PRO upholstery foam cutting machine is also equipped with a controller which enables simulation of the cutting process and setting of the machining parameters with their change during the cutting. All this makes the offered machine an excellent choice for businesses producing, among others, insulation elements, packaging and upholstered furniture. Tec ...

- technically efficient, ready to work – after full service - drilling for the bottom hinge - automatic screwdriver + ASS 60 screw feeder - punch holder - centring system - steering stop for trimming the stay - tilting table - shelf

Year: 2003 technically efficient, ready to work – after full service flash limit: 0.2 – 2 mm maximum welding dimension: 2400 mm support path programmable PLC controller automatic welding process

NAN-JHIEH NJ-900QE polystyrene pre-expander was built in 2008 in Taiwan by NAN-JHIEH ENTERPRISES CO. LTD. The machine is used in the pre-foaming of polystyrene, which is the first stage in the production of styrofoam boards. The raw material in the form of granules is subjected to high-temperature steam, which causes it to increase in volume several times. The result is expanded polystyrene EPS in a spherical form with a number of valuable properties, such as insulation, durability and flexibility of use. The NJ-900QE EPS pre-expander weighs 2800 kg. The machine on offer is part of a larger EPS production line. It is also possible to purchase the entire technological line, consisting of the following components: – NAN-JHIEH polystyrene pre-expander – EPS granulate feeding system – styrofoam forming machine (5 units) – injection moulding machine – robot for injection mou ...

NAN-JHIEH NJ-150VM EPS/EPE styrofoam moulding machine was built in 2008 in Taiwan by NAN-JHIEH ENTERPRISES CO. LTD. The machine is designed for the efficient production of various types of polystyrene parts, such as coffers, stucco, packaging inserts and food containers (lunchbox, thermobox, menubox etc.). The polystyrene is processed by means of special moulds that give the component the desired shape. These moulds are interchangeable so the machine can be adapted to different production profiles. A press force of up to 35 tonnes, combined with an extremely rigid design, ensure the achievement of high repeatability and quality of the components produced. The NAN-JHIEH NJ-150VM polystyrene moulding machine is currently configured for the production of expanded polystyrene (EPS) building blocks. Polystyrene building blocks are used in the building industry as lost formwork. Once a wall ...

technically efficient, ready to work - after full service bar spacing: 100 mm dimensions: 265 x 265 cm height: 150 cm weight: 350 kg

Year: 2018 technically efficient, ready to work – after full service hydropneumatic head feed with automatic profile height measurement automatic zeroing after the end of the work cycle double vertical and horizontal pneumatic clamps minimum internal pack dimension: 450 mm maximum internal pack dimension: 2740 mm

Year: 2009 - technically efficient, ready to work – after full service - discs: 500 mm - working length: 3700 mm - PC control (Windows XP) - online access - vertical and horizontal pneumatic clamps - automatic disc guards - roller feeder - support for longer profiles

Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/Outfeed table