lathes used for sale (2,962)

turning diameter: 1250 mmturning length: 1500 mmswing diameter over bed slide: 850 mmtotal power requirement: 22 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 3100x2150x1825 mBrand: JMTCLType: CW61125BDistance between centers: 1.500 mmCenterheight: 625 mmSwing over bed: 1.250 mm øSwing over support: 850 mm øMaximum turning diameter : 1.250ø x 1.500 mm øSpindle boring: 135 mm øThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 220 mmturning length: 200 mmcontrol: Siemens Sinumerik total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1120 mmturning length: 6000 mmswing diameter over bed slide: 760 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: ColomboType: VUP 2SYear of make: 1978Distance between centers: 6.000 mmCentre height: 560 mmSwing over bed: 1.120 mm øSwing over support: 760 mm ø4-Jaw chuck: 1.000 mm øDigital read-out: SonyIncluding:1 x steady rest 520 mm ø1 x steady rest 950 mm ø1 x open steady restChisel holderChisel support automatic feedRapid traverse chisel supportElectrically movable counter centerDrilling bar:length 2046 mm x 170 mm øThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 800 mmturning length: 1500 mmswing diameter over bed slide: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNext image can not be found: d833 tacchi mt400 (2)Brand: TacchiType: MT400Distance between centers: 1.500 mmCentre height: 400 mmSwing over bed: 800 mm øSwing over support: 250 mm øSwing in the gap: 550 mm øSpindle boring: 130 mm ø3-Jaw chuck: 390 mm øDigital read-outRapid traverse on longitudinal and cross travellingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 880 mmturning length: 6000 mmswing diameter over bed slide: 540 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: GeminisType: GE870Distance between centers: 6.000 mmCentre height: 440 mmSwing over bed: 880 mm øSwing over support: 540 mm øSwing in the gap: 1.100 mm øSpindle boring: 85 mm øSteadys: 400 mm ø + 600 mm ø3 jaw chuckDigital read-outThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 5000 mmturning diameter over bed: 4000 mmturning dia. in gap: 5000 mmspindle bore: 104 mmturning speeds: 1,4 - 71 (18x) U/mintotal power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: m4-jaw face plate Ø 3.150 mmmodular lathe!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1400 mmswing diameter: 1600 mmturning height: 1200 mmturning speed range - milling: 1 - 240 U/minControl: Siemens SIN 820T ram head - cross travel: 1000 mmtotal power requirement: 55 kWweight of the machine ca.: dimensions of the machine ca.: mA.T.C. 12 positionsToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over slide rest: 940 mmturning length: 10000 mmturning diameter: 1250 mmspindle diameter: 105 mmspeed: 1,6 - 315 (x24) m/minvoltage: 380 Vtotal power requirement: 75 kWweight of the machine ca.: tdimensions of the machine ca.: m4-jaw faceplatePower compoundThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mmswing diameter: 1400 mmturning height: 1400 mmcontrol: SIEMENS 850M total power requirement: 125 kWweight of the machine ca.: 38 tdimensions of the machine ca.: mStocknumber 1020042Type of machine CNC VTLMake PIETRO CARNAGHIType AC 10 CNCBuild in 1987Type of control Siemens 850 M/EFaceplate diameter 1000 mmMax. Swing diameter 1400 mmTurning height max. 1400 mmTotal Power (KW) totaal 125 Lenght (mm) 11000Width (mm) 8000Height (mm) 6000Weight 38000 kg Additional informationwith driven toolswith pallet changerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3.000 mmswing diameter: 7.000 mmturning height: 3.000 mmControl: FANUC 18i-TB total power requirement: 60/75 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 8500 mmturning diameter over bed: 1070 mmturning diameter over slide rest: 800 mmspindle bore: 128 mmturning speeds: 1,12 - 1120 U/minControl: Alan Bradley 9-series total power requirement: 62 kWweight of the machine ca.: tdimensions of the machine ca.: m3 Shear Bed, Carriage can bypass Steady Rest and Tailstock6-position Sauter Turret360 mm Capacity Self Centering Hydraulic Steady Rest385 mm Capacity Rotaring Work Support (Used for Gun Barrels)800 mm 4-Jaw ChuckTailstock Quill diameter Ø 200 mmTailstock Taper M.T. 6Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1800 mmturning height: 1600 mmturning diameter over bed: 2150 mmturning speeds: 3,15 - 250 U/minvoltage: 400 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 800 mmturning diameter over slide rest: 530 mmturning length: 8000 mmturning dia. in gap: 1080 mmspindle diameter: 95 mmspeed: 8-800 (21x) U/mintotal power requirement: 15/22 kWweight of the machine ca.: tdimensions of the machine ca.: m4-Jaw chuck3-Jaw chuck2x Steady Rest4-Way toolpostThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mmturning length: 2250 mmcontrol: CNCN 300 turning diameter over bed slide: 480 mm3-jaw-chuck diameter: 650 mmtotal power requirement: 44 kWweight of the machine ca.: tdimensions of the machine ca.: mVoltage 380VHertz 503-jaw chuck ø (mm) 650 Including: Turret, 9 positionChip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1740 mmturning diameter over slide rest: 1300 mmturning length: 16000 mmturning speeds: 4-180 U/minRapid travel: chip conveyor: digital readout: steady: total power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mmswing diameter: 1400 mmturning height: 1250 mmstroke of ram - solid: 750 mmSide head: 650 mmturning speeds: 4-210 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1800 mmturning diameter over slide rest: 1200 mmturning length: 16000 mmturning dia. in gap: 2300 mmspindle diameter: 150 mmspeed: 1 - 300 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1650 mmturning diameter over slide rest: 1200 mmturning length: 7500 mmturning dia. in gap: 2500 mmspindle diameter: 105 mmspeed: 3,55 - 180 (x24) U/minvoltage: 380 Vtotal power requirement: 45 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3050 mmturning diameter over slide rest: 2500 mmturning length: 21200 mmControl: Siemens type: 840D turning speeds: 0,236-60 U/minfaceplate: 3000 mmmain drive motor: 200 kWtailstock quill diameter: 900 mmroll stand: steady: 1200 mmsteady: 1200 mmsteady: 750 mmsteady: 750 mmwith live steady: 2000 mmfaceplate: 2000 mmThickness: 330 mmworkpiece weight: 200 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 93024 Description Chucking lathe Make Warner & Swaswy Model 0 - AC Serial No. 2083651 Year 1972 Swing over bed 200 mm Swing over gap 200 mm Swing over crossslide 200 mm Spindle bore --- mm Longitude: 140 mm Cross: 100 mm Chuck : 160 mm Bore: 20 mm Number of spindle speeds 32 Spindle speeds 58 - 2507 rpm Feeds Longitude and cross Motor power 5,5 kW – 380 Volts Accessoiries hydraulic 3 chuck coolant Condition Machine is in good condition.

Code 81176 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 3000 S/N 30 – S / 80 Year 1995 Control Heidenhain Manual Plus ( 1998 ) Distance between centers 3000 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 6000 kg Accessories 3 chuck of 315 mm 1 fixed steady 1 open steady cooling equipment Condition Machine is in good condition

Code 71139 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 1500 S/N 30 H / 87 Year 1996 Control Siemens Sinumerik 805 Distance between centers 1500 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 5500 kg Accessories 8 ATC Duplomatic toolholder R 10 Hydraulic 3 chuck Ø 315 mm 1 fixed steady with 320 mm bore 1 open steady cooling equipment Condition Machine is in good condition

Code 2876 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 5150 Year 1980 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Steadies Rapid toolpost Condition Machine is in normal condition.

Code 2841 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 4475 Year 1976 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Condition Machine is in normal condition.

Cooling pump for SN 71 C Trens lathe

Fixed bezel with roles Quill Used 400 mm forward

3-jaw chuck bison, new modell 3544 steels Camlock 55029 - 11 drilling 136 mms

This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details.

This 4-axis EMCO Turn 420 MC Plus was manufactured in 2005. It features a maximum turning diameter of 100 mm and a maximum part length of 600 mm. The machine is equipped with a powerful spindle speed range of 0–5000 rpm and a tool changer with 24 stations. If you are looking to get high-quality turning capabilities, consider the EMCO Turn 420 MC Plus multi-spindle turning machine we have for sale. Contact us for further details.

OIL LATHE STANKO SPINDEL BORE 300 mm