lathes used for sale (2,965)

- Chip conveyor - SMW Front and Rear chuck 700 mm - Double revolver 6+8 positions- Big Bore 360 mm- Tailstock with power quill- Tooling package included with inserts and jaws

- Tooling holders included- Live driven Axiaal tools included - Live driven Radial tools included- Chip conveyor- Tool eye arm- Motorized Tailstock- 3 chuck 400 mm with extra2008 jaws

- Sauter revolver with C + Y Axis - 3 bed way construction- Hydraulic pinole on tailstock- 2 x SMW Autoblock Steady rest 20 - 165 mm- Renishaw Measuring Taster - Tooling package with Vdi holders ca 10 pieces- Driven Tooling Vdi 3 pieces 

Tacchi HD3/140L CNC heavy duty lathe with milling capability. Year 2001. Built for large diameters, long shafts, and demanding roughing with reliable accuracy. With 95 kW spindle power, a 2,000 mm swing over bed, and 8,000 mm between centers, the Tacchi HD3/140L delivers capacity and rigidity for continuous industrial use.This used HD3/140L offers the power and stability you need for heavy cuts, confident finish quality, and fewer setups. The 3 bed way construction and 1,400 mm bed width enhance stiffness. The full C axis with 360,000 positions and a 22 kW milling tower enable complete machining in one clamping, reducing cycle time and handling. Buyers searching for a second hand HD3/140L benefit from proven Tacchi reliability and a large working envelope.- Swing over bed 2,000 mm- Swing over cross slide 1,550 mm- Between centers turning length 8,000 mm- Workpiece weight between centers  ...

- 4 Chuck 1400 mm- Steady rest 3 units Ø 100-1050- Roller steady open 2 units Ø 1120- KNOLL Chip conveyor 2022- Boring bar Ø 260 x 3500 mm- Boring bar Ø 200 x 1500 mm- Boring bar Ø 150 x 1100 mm

- 3 bed way construction- Bed width 1100 mm- 3 x C-Type Steady rest on lower base with in feed- 2 x Fixed steady rest 300 - 800 mm with 5 ton- 2 x Chip conveyor- 4 Chuck 1000 mm- Barafuldi 4 way turret head

- For Track 1435 and 1000 mm- Doubled support carriage- CNC controlled measuring and correction probe- Chip conveyor - internal and external clamping jaws (wheel clamp in and out)- overhauling cost 850k EUR- Under power free 02.2026

- set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE - Jaw width 90 mm - Jaw height 75 mm - Hole to hole jump 125 mm

- set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE - Jaw width 90 mm - Jaw height 75 mm - Hole to hole jump length ways 125 mm - Hole to hole jump in width 250 mm

- Work load 6300 Kg- Cross rail adjustment 660 mm- Feed rate cross rail 0 - 400 mm/Min- Feed rate 0 - 3000 mm/Min- Rapid feed 0 - 8000 mm/Min- Central lubrication- Chip conveyor- RAM with Sandvik COROMONT C8- Tooling C8 with double connector- Ca 10 units CAPTO Tool system- 4 extra heavy duty jaws

- Live tools 30 kw and 3000 Rpm with Sk50- Full C-Axis 360.000 - Work load 10.000 Kg- Grinding spindel 30 kw and 3000 Rpm with Sk50- Chip conveyor- Tool holders included max 400 mm height-  

- X Stroke 1835 mm- Z Stroke 1000 mm- Table load 20 Ton- Ram size 230 x 230 mm - Stroke crossrail 800 mm - Stroke crossrail in 5 steps each 200 mm- Live tools 2000 Rpm- Power live tools 15 kW- ATC 18 station max L = 450 mm- Taper BT50 BIG PLUS- Full C-Axis 360.000 - Under power in AEROSPACE precision plant- 2020 Table bearing replaced- 2020 Ram bearing replaced- 2025 new chip conveyor

- Multi-Tasking Machining in a Single Machine Setup- Sub spindle for overtaking with full C-Axis- The INTEGREX IV series can finish all machining processes.- High speed, advanced milling spindle that can tilt up to 240 degrees swiveling.- Lower turret with rotary tool spindle so livew tooling- Chip conveyor with coolant and 15 Bar iKZ- Double chuck KNCS-N 210-53 SMW Autoblock- MAZAK Flex -GL150F Gantry Loader- Gripping range 200 x 120 length x 15 Kg

 - Tandem construction on 1 bed left headstock + right headstock- Mirror double tailstock left and right - Double carriage - Steady rest included- Roller rest included- Opperator panel with scales needs attension and replacement - Motorized tailstock for each side left and right- 3 bed way construction- Torq on chuck 160.000 Nm- Minimum turning diameter Ø 315 mm - Field off indurstrie:- Ship yard- Propeller shaft- Hydraulic cylinder shaft- Camshaft- Defence & Aeronautica- Rolls and Shaft for steelmills- Crankshaft

- Optional chuck 1200 mm- 2 Axis RSF Digital read out- Conical turning attachment- Spindle bore 130 mm- Central lubrication

Discover the power of EST TICINO and its impressive ET-BM-CT 520 model. A used ET-BM-CT 520 is a prime example of the sturdiness and reliability of the brand. Boasting substantial swing over the bed (1040mm), cross slide (710mm), and insurmountable swing in the gap (1580mm), its prowess extends beyond the average. With an impressive 40 kW spindle power and 160mm spindle bore, your performance expectations will be commendably met.Its 3-guideway construction and double V Prima guideways add to the robustness of this model. The added features of a steady 600mm and 7800mm rest, a 4-chuck 800mm, and an Oil Country 160 spindle bore significantly enhance its operational capability. Additionally, the ET-BM-CT 520 offers an optional larger chuck up to 1500mm. These sought-after attributes present versatile applications, thus being ideal for heavy-duty metalworking, tool manufacturing and componen ...

- HeidenHain ND-780 with 3 axis Read-outX, Zo, Z - HeidenHain LS388C Scales- 2 x CE-Chuck cover for 500 & 900 mm- SCHUNK 3 chuck Ø 400-102 - Bison 4 chuck - Steady rest Ø   30 - 210 mm- Steady rest Ø 210 - 370 mm

- Very little hours- Hydraulic tailstock- CE Safety doors- Multi Fix Tool holders system  D1- Chip conveyor

- stationary magnetic particle crack detector- deutroflux uws 2500 for longworkpieces- movable carriage for lengte adjustment- 2 phase shifted AC currents generate magnetic field thus, cracks in every direction are detected- skin effect of AC uniform magnetization and demagnezation even in complicaties workpiece geometrie like cranckshaft- new price EUR 250.000