lathes used for sale (3,039)

Selling an inventory of a mechanical engineering company. various lathes, milling machines, rolling machines, saws, etc. Pictures on request. The machines are only sold as a package! Not individually

turning length: 2500 mmcontrol: Sinumerik 840 D spindle head: A 11 tool numbers: 48 swing diameter over bed slide: 750 mmswing over bed: 780 mmc-axis: 0,1-30 1/mindiameter of quill: 160 mmtaper bore: MK 5 tool length - max.: 500 mmweight of tools max.: 15 kgweight of the machine ca.: 27 tdimensions of the machine ca.: 8,4 x 4,0 x 2,5 mTechnical details:Nominal turning length: 2,500 mmSwing diameter over bed slide: 750 mmSwing diameter over bed: 780 mmWorking height: 1,300 mmSpindle head to DIN 55026: A 11Bore through: 123 mmDiameter in front bearing: 200 mmOriented spindle stop: 0-359 degreesDrive power at 100/60 % duty cycle: 37/45 kWTotal speed range: 10-2,500 1/minNumber of speed ranges: 2Speed range I: 10-775 1/minSpeed range II: 20-2,500 1/minMax. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)The data for this ad was created with ModulMWS - the sof ...

Key data: 32 mm, 8000 1/min

Specifications: Manufacturer: Spinner Type: SB 32-V4 Year of Make: 2015 Control: Fanuc Series 32i Model B Travels: X 250 mm Z 285 mm Switch-on hours: 52,356 h Spindle Spindle speed: 8,000 rpm Spindle passage: 32 mm Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: C-axis Preparation Interface Bar Feeder Linear Tool Carriers Collet chuck

Specifications: Manufacturer: Spinner Type: SB 32-V4 Year of Make: 2017 Control: Fanuc Series 32i Model B Travels: X 250 mm Z 285 mm Switch-on hours: 39,889 h Spindle Spindle speed: 8,000 rpm Spindle passage: 32 mm Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: C-axis Preparation Interface Bar Feeder Linear Tool Carriers Collet chuck

Specifications: Manufacturer: Spinner Type: SB 32-V4 Year of Make: 2017 Control: Fanuc Series 32i Model B Travels: X 250 mm Z 285 mm Switch-on hours: 39,616 h Spindle Spindle speed: 8,000 rpm Spindle passage: 32 mm Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: C-axis Preparation Interface Bar Feeder Linear Tool Carriers Collet chuck

Key data: 32 mm, 8000 1/min

Specifications: Manufacturer: Spinner Type: SB 32-V4 Year of Make: 2017 Control: Fanuc Series 32i Model B Travels: X 250 mm Z 285 mm Switch-on hours: 39,131 h Spindle Spindle speed: 8,000 rpm Spindle passage: 32 mm Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: C-axis Preparation Interface Bar Feeder Linear Tool Carriers Collet chuck

turning diameter: 500 mmturning length: 1000 mmcontrol: Mazatrol Smooth G number of spindle speeds: 5000 U/minspindle motor: 11/7,5 kWaxis stroke (X,Y,Z): 450, 200, 960 mmtravel -w axis: 950 mmb-axis: -30 / +210 °c-axis: 360, 0,0001 °bar material dia.: 65 mmmilling spindle: spindle bore: 76 mmspindle turning speed range: 12000 U/minspindle motor: 7,5 / 5,5 kWtool taper: HSK A 63 rapid travel x/y/z: 40000 mm/minweight of the machine ca.: 9.5 tdimensions of the machine ca.: 3900 x 2600 x 2400 mmequipped with:- CNC control Mazak Smooth G- Main and counter spindle- milling spindle- Y-axis- Tool holder: HSK A 63- Tool magazine: 72 places- Tool Eye- Mazak monitoring system B (RMP 60)- Coolant and compressed air (1.5 MPA)- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 545 mmturning length: 753 mmcontrol: Mazatrol Matrix 2 Main Spindle:: c-axis: 0,0001 °spindle motor: 11 kWspindle turning speed range: 6000 U/minx-axis: 410 mmz-axis: 805 mmy-axis: 140 mmw-axis: 903 mmb-axis: 225 °bar material dia.: 61 mmRapid Travel X / Y / Z-Achse: 30/26/30 m/min2nd Spindle:: c-axis: 0,0001 °power capacity: 11 kWspindle turning speed range: 5000 U/minmilling spindle: spindle turning speed range: 12000 U/minspindle motor: 5,5 kWtotal power requirement: 45,6 kVAweight of the machine ca.: 7,7 tdimensions of the machine ca.: 3,1 x 2,495 x 2,5 m5-axis simultaneous machining- CNC control Mazatrol Matrix 2- Main & counter spindle- 9-position tool turret- Tool changer (20-fold)- Capto C6 milling spindle- Coolant system IKZ 20bar- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 658 mmworkpiece length - max.: 1519 mmcontrol: Mazatrol Matrix 2 swing diameter: 658 mmclamping range for bar work: 102 mmworkpiece weight: 1000 kg------------ MAIN SPINDLE ------------: turning speeds: 35 - 3300 U/minpassage of spindle: 112 mmc-axis: 0,0001 spindle motor: 30/22 kWspindle nose: A2-8 milling spindle: spindle motor: 22 / 15 kWmilling head speed: 12000 U/minb-axis: -30 / +210 °travel -x axis: 615 mmtravel -y axis: 260 mmtravel -z axis: 1585 mmrapid travel x/y/z: 50 / 40 / 50 m/min2nd Spindle:: spindle turning speed range: 4000 U/minspindle motor: 26 / 22 kWspindle nose: A2-8 spindle passage: 91 mmw-axis: 1539 mmtotal power requirement: 108,53 kVAweight of the machine ca.: 18 tdimensions of the machine ca.: 5,2 x 2,8 x 2,75 m- CNC control Mazatrol Matrix 2- Main & counter spindle- Milling spindle (Capto C6)- 36-position tool changer- IKZ 70 bar- Tool  ...

turning diameter: 720 mmturning length: 3000 mmcentre height: 360 mmspindle bore: 106 mmturning speed range: 1 - 1800 U/mintailstock quill taper MT: 6 workpiece weight max.: 3800 kgtotal power requirement: 36 kWweight of the machine ca.: 6100 kgdimensions of the machine ca.: 4800 x 2450 x 2000 mmCNC lathe - cycle controlledThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe CMZ TTL 66 Year 2021 9500h Duty Cycle Hours

CNC lathe Padovani BJ 1996 including the stainless steel tub

X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for ...

turning diameter: 630 mmturning length: 3000 mmswing diameter over bed slide: 480 mmturning speeds: 9 - 1800 U/minspindle bore: 83 mmtailstock quill taper MT: 6 total power requirement: 22 kWweight of the machine ca.: 5400 kgdimensions of the machine ca.: 5250 x 1900 x 1750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter over bed/slide: 520mm/340mm, turning length: 850mm, speed: 3500rpm, spindle bore: 70mm, chuck diameter: 315mm, bar capacity: 70mm. Machine weight: approx. 7500kg, control: OSP 500L. Documentation available. On-site inspection is possible.

turning diameter over bed: 410 mmturning diameter over slide rest: 260 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 40 - 2000 U/mincentre height: 205 mmspindle bore: 50 mmtotal power requirement: 4,5 KWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2,4 x 1,3 x 1,5 mLeadscrew lathe- with copying device- 200mm 3-jaw chuck- 2x Multifix quick-change tool holders- Live center- Machine light- Chip trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

turning diameter: 140 mmturning length: 615 mmcontrol: C200-4D spindle passage: 65 mmMain spindle: turning speeds: 5.000 U/minmax. torque at 40% / 100% load: 145 / 105 kWturret-slide: 1,2 und 3 x-travel: 110 mmz-travel: 360 mmy-travel: 70 mmrapid traverse X/Y/Z: 25/12/45 m/minOpposed spindle: slide travel X-axis: 150 mmZ- Travel: 600 mmturning speeds: 5.000 U/minB - axis: B-Korrekturachse +/- 1 °tool turret - number of stations: 3 x 12 tool taper DIN 69880: VDI 25 x 48 C-axis: 0,001 °total power requirement: 61 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 9,75 x 3,10 x 2,85 mLoading:Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm)Unloading:BREUNING ILS-REX-7208 automatic workpiece unloader, built in 2007The data for th ...

Turning diameter: 320mm, turning length: 1000mm, spindle clearance: 80mm, speed: 3150rpm, travel X/Z: 265mm/1000mm. Machine dimensions X/Y/Z: approx. 5500mm/2400mm/2400mm, weight: approx. 7000kg, control: Traub System TX-8. Including a tool set, three-jaw chuck and bar chuck with collets. Documentation available. On-site inspection is possible.

turning diameter over bed: 280 mmturning diameter over slide rest: 150 mmturning length: 800 mmturning speed range: 26 - 2000 U/minspindle bore: 24 mmtotal power requirement: 0,8 / 1,6 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,60 0,70 1,20 m1. Hand - School MachineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotation diameter over bed/slide: 560mm/300mm, max. workpiece weight between centers: 2500kg, max. workpiece weight in chuck: 800kg, center width: 1000mm, machining length: 980mm, feed: 8m/min, bed width: 433mm, tool positions: 8, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3000mm/2300mm/1800mm, weight: approx. 3700kg, control: Siemens 810D Manual Turn. Documentation available. On-site inspection is possible.

Turning diameter over bed/cross slide: 500mm/280mm, max. workpiece length: 1500mm, travel X/Z: 280mm/1430mm, spindle bore: 82mm, speed: 2200rpm, rapid traverse X/Z: 6m/10m/min, quill diameter: 75mm, quill stroke: 150mm, bed width: 400mm, chuck diameter: 250mm. Machine dimensions X/Y/Z: approx. 3350mm/1750mm/1650mm, weight: approx. 2700kg, control: Fanuc Series 0i Mate-TC. Documentation available. On-site inspection is possible.

Turning diameter over bed: 500mm, turning diameter over face slide: 250mm, center distance: 2000mm, spindle bore: 58mm, speed: 1400rpm. The feed of the machine is defective. On-site inspection is possible.

faceplate diameter: 4000 mmswing diameter: 4300 mmturning height: 1750 mmslide adjustment: 1000 mmtable load: 18 tturning speeds: 1-92 U/minControl: Siemens type: 840 D mmRest: 2 chip conveyor: ram head dimension: 250x250 mmFeed: 1-4000 mm/minmain gear-box motor: 55 kWtotal power requirement: 85 KVAweight of the machine ca.: 64 tdimensions of the machine ca.: 8x5,8x8 mThe machine was overhauled in 2007.The machine is currently designed to machine rings,but can be converted again for machining large parts.Additional informationChip conveyorThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested ...

Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible.

ED 300ECO Metal Lathe Motor 400W (S1) 230V 50Hz Dimensions in mm 760x230x254 Center width/height 300mm / 90mm Rotary spindle speed 50-2500 rpm Spindle bore 20mm Spindle mount MK3 Tailstock Cone MK2 Travel longitudinal slide 275mm Traverse travel cross slide and top slide 70mm Quill path 5mm Thread Metric in mm/r 0.5-2.5 max. tool holder 8mm Weight 48kg G&HM ED300Eco_2

CNC controller: FANUC FS-31iA5 (MAPPS 4) Capacity X-axis travel mm: 685 Y-axis travel mm: 125 Z-axis travel mm: 1075 Turning length mm: 1045 Max. turning diameter mm: ø: 600 Bar work capacity mm: 65 Turn-mill spindle Full indexing specifications: YES B-axis degree: 120º FULL INDEXING SPECIFICATION Speed spindle rpm: 12000 Drive power kW: 18.5/11 Tool magazine Magazine places: 80 Tool holder: CAPTO C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret Number of tool slots St .: 12 Drive power driven tools kW: 5.5/3.7 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 25/22 (100%/40%ED) Spindle bore mm: 73 Chuck type: HOLLOW CHUCK (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 5000 Drive power spindle kW: 25/22 (100%/40%ED) Spindle bore mm: 73 Chuck type: HOLLO ...

Key data: 800 mm, 4000 mm

Description Seiger SLZ 800E cycle lathe incl. milling unit Details Machine no. 4443 Year of construction 2008 Control Siemens Sinumerik Turning diameter 800 mm Turning length 4,000 mm Face plate 800 mm, 4 jaws Face plate 500 mm, 4 jaws 3-jaw chuck 400 mm Lynette up to 450 mm (2 different) Accessories various jaw sets powered tool Permissible workpiece dimensions: between tips without setting stick 2,000 kg with a setting stick 2,200 kg with two sets 2,500 kg flying in the face plate 750 kg Machine dimensions incl. cladding 2,000 mm + Tip Wide x 2,750 mm x 2,000 mm incl. documentation

Control Siemens 840D Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Speed 4,500 min-1 8-speed revolver Conveyor

Specifications: Manufacturer: Weisser Type: Univertor AM-1L Year of Make: 2020 Control: CNC control Siemens SINUMERIK 840D sl Travels: X 1,700 mm Z 500 mm Spindle unit left side of the machine Speed Limit| 3,500 rpm Rated speed: 780 rpm Torque: 430/610 Nm (100/40% ED) Spindle bearing Ø: 120 mm Spindle flange: A8 according to DIN 55026 Dressing unit Max. speed: 16,000 rpm Dressing disc holder Ø: 40 x 10 mm Revolver Target turret: 12-speed Drive: electric swivel drive Internal grinding spindle with grinding software Tool holder: D28/43 (thread M28x2) Spindle bearing Ø: 45 mm in hybrid version Speed limit: 45,000 rpm. Rated speed: 30,000 rpm Drive power: 15/18 kw (100/60 % ED) Torque| 4.7/5.7 Nm (100/60% DC) External grinding spindle with grinding software Tool holder taper: 1:10; Ø 73 mm Spindle bearing Ø: 80 mm in hybrid version Speed limit: 6,00 ...