sheet metal working used for sale (3,244)

angle steel/side length: siehe TD mmdouble T-iron on the x-axis: siehe TD mmU-iron on the x-axis: siehe TD mmtotal power requirement: kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 1000 x 700 x 1380mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press brake TRUMPF TrumaBend V 85 Year of construction 1999 Machine specifications: working length 2050 mm - Stand passage 1750 mm - pressing force 850 kN - Distance table / plunger 410 mm - Stand projection 410 mm - Plunger stroke 285 mm - Lifting speeds - Downward speed rapid path 200 mm/sec - Upward speed 135 mm/sec - Downward press speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx.B 3700 x H 2700 x D 2100 mm - Weight approx. 8000 kg

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

specifications: - Pressure capacity 100 KN / 10 t - Compressive force adjustable 0 - 100 kN - Stroke length 0 - 150 mm - Clear width approx. 200 mm - Lifting speed 0 - 0.6 m/min - Tool height up to approx. 100 mm - Bending performance - with prism MW 100 flat to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Directional power Wy at straightening block distance of 1m 100 cm³ - Drive 400 V / 1.1 kW - Space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg

Hydraulic swivel bending machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper cheek, backgauge (1000mm), goat feet with automatic tool clamping, electr./hydr. Adjustment of the bending cheek -Illustrations similar-

pressure: 55 thole diameter in sheet thickness: Ø 40 in 10 mmthroat: 500 mmstroke: 60 mm: 38 /min.engine output: 5 kWweight of the machine ca.: 1.150 kgOverall size: 1500x1100x2000 mmAccessories / equipment:- punching tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 10 mmcutting angle: 2 °down holder: 14 Stückno. of strokes: 13 Hub/minthroat: 350 mmoil volume: 260 ltotal power requirement: 22 kWweight of the machine ca.: 10.550 kgdimensions of the machine ca.: 4000x2250x2050 mmDomestic equipments:- Hydraulic swing cut sheet metal shears- Touch screen controller with digital display for backgauge- automatic kerf adjustment via the control- Backgauge control 1000 mm travel with recirculating ball screws- Vibration cutting machine with kerf adjustment- 2 support arms- 1 side stop- Photocell behind the machine- Cutting length limit- cut line lighting- Chrome steel knife- Ball rolls in the table- hinged finger guard with limit switch- Footswitch- CE mark / Declaration of Conformity- Bed instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6 mmvoltage: 380 Vcontrol: CYBELEC CybTouch down holder: 14 Stückcutting angle: 1,2 °total power requirement: 11 kWweight of the machine ca.: 5700 kgdimensions of the machine ca.: 4000x2100x1640 mmAccessories / equipment:- CYBELEC Cybtouch touch screen controller- NC controller for backgauge, gap adjustment, number of pieces,cutting length- 1 side stop with scale, T-groove and tilting cam- 2 front support arms- cut line lighting- Cutting gap adjustment- Cutting length limit- Folding finger guard with limit switch- motorized back gauge 1.000 mm travel- Ball screws- Photocell behind the machine- Ball rolls in the table- SIEMENS electrical system- BOSCH / HOERBIGER hydraulic system- Footswitch- CE mark / Declaration of Conformity- Operating manual: Machine and control in GermanThe data for this ad was created with ModulMWS - the software solution of Lo ...

pressure: 110 t: Ø 40x20 mm throat: 500 mmengine output: 9 kWno. of strokes: 28 Hub/minstroke max.: 80 mmweight: 3150 kgAccessories / equipment:- punching tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,5 mmroll-body distance: 260 mmthroat: 500 mmdistance between roll centers: 92 mmtool adaptor: 35 mmspeed: 3,5 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 295 kgdimensions of the machine ca.: 1200x700x1200 mmDomestic equipments:- motor driven beading machine- 3 sets of bead rollers- Footswitch- Operating instructions in German- CE mark / Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /minPunching force: 60 to throat: 500 mm: 40x11 mm: 350x15 mm: 350x15 mmL-beam 90°: 120x120x10 mm: 45 mmsquare edge steel: 40 mm: 10 mm: Aufnahme bis max. 150x10 engine output: 5,5 kWweight: 2012 kgBasic equipment:- Flat steel shears with knife set- Angle shears with knife set- Punch with quick release device for punches up to 40 mm- Support table for punching device- Triangular notching device- Support table for notching- bending station- Bending stamp with matrices V 40 and V 70- electrical contact stop (1 meter)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /minPunching force: 60 to throat: 250 mm: bis max. Ø 40x11 mm: 350x15 mm: 350x15 mmL-beam 90°: 120x120x10 mm: 45 mmsquare edge steel: 40 mm: 10 mm: Aufnahme bis max. 150x10 engine output: 5,5 kWweight: ca. 1600 kgBasic equipment:- Flat steel shears with knife set- Angle shears with knife set- Punch with quick release device for punches up to 40 mm- Support table for punching device- Triangular notching device- Support table for notching- bending station- Bending stamp with matrices V 40 and V 70- electrical contact stop (1 meter)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 45 t hole diameter in sheet thickness: Ø 27x13 mm: 24 /minL-beam 90°: 80x80x8 mmL-beam 45°: 60x60x6 mmflat steel: 200x13 mm: 7 mmengine output: 2,2 kWweight: 760 kgBasic equipment:- Complete set of blades for flat steel shears- Complete knife set for angle steel shears- Compl. Standard punching device- Stamp quick release device for punches up to 27 mm diameter- Rectangular notching device compl. with hold down- notch- Support table for punching deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm: 8,5 U/min: 120 mmroll diameter: 152 / 162 mmengine output: 1,1 kWrange L-W-H: 900 x 600 x 1000 mmweight: 470 kgconnected load: 400/50 V/HzEquipment / Accessories:- Three driven rollers- Manual delivery of the upper roller- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. He can turnused different profilesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mmroll-body distance: 260 mmthroat: 500 mmdistance between roll centers: 132 mmtool adaptor: 40 mmspeed: 5 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 350 kgdimensions of the machine ca.: 1650x700x1280 mmDomestic equipments:- motor driven beading machine- 3 sets of bead rollers- Footswitch- Operating instructions in German- CE mark / Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

shaft diameter: 60 mmShaft revolutions: 6 U/minroll diameter: 215 mmpressure hydraulic cylinder: 180 kNdimensions: 1125x870x1620 mmweight: 820 kgAccessories / Equipment:- Three driven rollers- Hydraulic delivery of the upper roller- Working position horizontal and vertical- Digital display with memory function- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6 mmvoltage: 380 Vcontrol: CYBELEC CybTouch down holder: 14 Stückcutting angle: 1,2 °total power requirement: 11 kWweight of the machine ca.: 6.300 kgdimensions of the machine ca.: 4000x2100x1640 mmEquipment:- CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max. Traverse path, for longer cuts- 1x side stop- 2x front support arms- Ball casters in the front support table- hinged finger protection, with safety switch- BOSCH / HOERBIGER hydraulic system- SIEMENS electrical system- light barrier behind the machine (safety device)- foot switch- CE mark / declar ...

: 45 to.no. of strokes: 24 Hub/minhole diameter in sheet thickness: max. Ø 27 in 13 mm: 80x80x8 : 60x60x6 mmflat steel: 300x10/200x13 mm: 7 mmengine output: 2.2 kWrange L-W-H: 1550x820x1540 mmweight: 760 kgStandard equipment:- Complete knife set for flat steel shears- complete knife set for angle steel shears- complete standard punching equipment- Stamp quick release device for punches up to Ø 27 mm- Rectangular notching device complete with hold-down device- notch- Support table for punching deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 25 mmpre-bending: 20 mmupper roll diameter: 390 mmlower roll diameter: 360 mmside roll diameter: 300 mmtotal power requirement: 18,5 kWweight of the machine ca.: 17.100 kgMachine dimensions approx.: 5800x2100x2000 mmAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm: 8,5 U/min: 120 mmroll diameter: 152 / 162 mmengine output: 1,1 kWconnected load: 400/50 V/Hzhydraulic pump: 1,1 kW: 80 kNrange L-W-H: 900 x 600 x 1000 mmweight: 470 kgEquipment / Accessories:- Three driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. He can turnused different profilesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 28 min.Punching force: 110 to: 40x20 mmflat steel: 600x15 oder 400x20 mmL-beam 90°: 160x160x16 mmL-beam 45°: 70x70x7 mm: 50 mmsquare edge steel: 50 mm: 13 mmthroat: 300 mmBasic equipment:- Complete set of blades for flat steel shears- Complete knife set for bar cutter- Complete knife set for angle steel shears- Compl. Standard punching device- Stamp quick release device for punches up to 40 mm diameter- Rectangle notch compl. with hold downs- Complete knife set below for rectangular notching- Upper tool for rectangular notching- Support table for flat material- Punching table with stop- Notch with stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 95 mmShaft diameter: 30 mmShaft revolutions: 7 U/minroll diameter: 132 mmDrive: 0,75 kWweight: 220 kgrange L-W-H: 530x900x660 mmEquipment / Accessories:- Two driven rollers with grooved surface- Manual feed of the upper roller- working position horizontal and vertical (with tilting base)- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. He can turndifferent profiles are used e.g. Flat iron, T-iron, solid materialetc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round material: 40 mmtube diameter: 70x2 mmsquare material: 80x30x3 mmL-beam: 50 x 5 mmI - beam section - flat steel: 80 x 16 mmI-beam section - upend: 50 x 15 mmroll diameter: 157 mmShaft diameter: 50 mmbending speed: 2,95 m/mintotal power requirement: 1,1 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: 1000x950x1450 mmDomestic equipments:- Special steel shafts (42CrMo4) hardened and ground- a set of standard rollers- lower rollers up and down hydraulically deliverable- digital display for lower rollers- separate control panel- in one direction manually adjustable lateral straightening rollers- manual lubrication- horizontal and vertical operation- CE mark / Declaration of Conformity- Operating instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm: 8,5 U/min: 120 mmroll diameter: 152 / 162 mmengine output: 1,1 kWconnected load: 400/50 V/Hzhydraulic pump: 1,1 kW: 80 kNrange L-W-H: 900 x 600 x 1000 mmweight: 470 kgEquipment / Accessories:- Three driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. He can turnused different profilesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 1 mmroll diameter: 56 mmdimensions of the machine ca.: 1600 x 700 x 1050 mmDomestic equipments:- Upper roller can be swung out manuallyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm: 8,5 U/min: 120 mmroll diameter: 152 / 162 mmengine output: 1,1 kWconnected load: 400/50 V/Hzhydraulic pump: 1,1 kW: 80 kNrange L-W-H: 900 x 600 x 1000 mmweight: 470 kgEquipment / Accessories:- Two driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. He can turnused different profilesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mmplate thickness: 13 mmpre-bending: 10 mmupper roll diameter: 230 mmlower roll diameter: 210 mmside roll diameter: 190 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4.620 kgdimensions of the machine ca.: 4150x1400x1300 mmAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 10 mmPunching force: 55 to: 40x10 mmflat steel: 300x15 oder 200x20 mmL-beam 90°: 120x120x10 mmL-beam 45°: 70x70x7 mm: 40 mmsquare edge steel: 40 mm: 37 /min.throat: 250 mmweight of the machine ca.: 1.600 kgBasic equipment:- Complete set of blades for flat steel shears- Complete knife set for bar cutter- Complete knife set for angle steel shears- Compl. Standard punching device- Stamp quick release device for punches up to 40 mm diameter- Rectangle notch compl. with hold downs- Complete knife set below for rectangular notching- Upper tool for rectangular notching- Support table for flat material- Punching table with stop- Notch with stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 48x3,5 mm: 48x2,5 mm: 32 mm: 64x2 mmbending speed: 2 U/min: R10-R300 total power requirement: 1,5 kWweight of the machine ca.: 110 kgdimensions of the machine ca.: 410x1000x570 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,5 mmroll-body distance: 260 mmthroat: 500 mmdistance between roll centers: 92 mmtool adaptor: 35 mmspeed: 3,5 m/mintotal power requirement: 1,5+0,55 kWweight of the machine ca.: 320 kgdimensions of the machine ca.: 1200x700x1200 mmDomestic equipments:- motor driven beading machine- 3 sets of bead rollers- Footswitch- Operating instructions in German- CE mark / Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.