sheet metal working used for sale (3,244)

flat steel: 350 x 10 mmround bar steel: 35 mmsquare edge steel: 30 mmL-beam: 80x80x8 mmhole diameter in sheet thickness: Ø 27 in 13 bzw. Ø 20 in 8 mm: 500 kNthroat: 177 mm: 34 (Hub 15mm)blade length: 356 mmengine output: 3.0 kWweight: 950 kgdimensions: 1300x1100x1850 mmStandard equipment:- Knife set for flat steel- Complete knife set for angle steel shears- Complete normal punching equipment- Quick release device for punches up to 31 mm- Support table for punching device, rectangular notching and flat steel shears- Bending stamp with matrices V 40 and V 70- Electric contact stop (1.000 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 215 mmshaft diameter: 60 mmShaft revolutions: 6 U/min: 100x2 mm: 80x15 mmpressure hydraulic cylinder: 180 kNtotal power requirement: 2,2 kWweight: 720 kgdimensions: 1200x900x1700 mmAccessories / Equipment:- Three driven rollers- Hydraulic delivery of the upper roller- Working position horizontal and vertical- Digital display with memory function- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 60x3 mm: 60x2,5 mm: 35 mm: 64x4 mm: R10-R300 bending speed: 2 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 130 kgdimensions of the machine ca.: 595x363x900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stroke: 70 mmwork height max.: 1094 mmthroat: 500 mm: 40 in 14 mmno. of strokes: 20 Hub/minthroat: 500 mm: 80 toengine output: 9 kWrange L-W-H: 1980x1150x2000 mmweight: 2000 kgAccessories / equipment:- punching tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 10 mmpre-bending: 8 mmupper roll diameter: 270 mmlower roll diameter: 250 mmside roll diameter: 210 mmtotal power requirement: 11 kWweight of the machine ca.: 7750 kgOverall size: 5600x1450x1600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm: 8,5 U/min: 100 kNroll diameter: 162 mmDrive: 1,5 kWrange L-W-H: 1100x850x1350 mmweight: 495 kgEquipment / Accessories:- Two driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- Footswitch- standard roller setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 50 mmsquare edge steel: 40 x 40 mmL-beam: 140 x 13 mmPunch power: 900 kNhole punching press: throat: 510 mmhole punching press: max. length of stroke: 29 mmhole punching press: capacity (dia. x thick.): 31 x 20 mmnotching: l + T material: 80 x 14 mmno. of strokes: 40 / 45 Hub/mintotal power requirement: 4 kWweight of the machine ca.: 3,7 tdimensions: 2,1 x 0,7 x 2,12 mAccessories: various punches and diesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 4000 mmdistance between columns: 3060 mmcontrol: FORTRON CNC 10 H 4 throat: 280 mmstroke: 250 mmdayligth: 500 mmtable length: 4050 mmtable width: 280 mmfeed down: 70 mm/secfeed up: 68,4 mm/secworking feed: 9 / 3,5 mm/secoperating pressure: max. 205 baroil volume: 400 ltotal power requirement: 19,5 kWweight of the machine ca.: 20,8 tTotal weight including accessories: 22 tdimensions of machine L x W x H: 4,8 x 1,88 x 2,93 mdimensions of switch cabinet: 1,6 x 0,5 x 2,25 mAcc.: programmable back gauge, upper and lower dies, table extensionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 6 total power requirement: 7,5 kWweight of the machine ca.: 4,340 tdimensions of the machine ca.: 3830 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 8mm total power requirement: 15 kWweight of the machine ca.: 9,7 tdimensions of the machine ca.: 5310 x 1660 x 1590 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmpre-bending: siehe TD total power requirement: 3 kWweight of the machine ca.: 1,06 tdimensions of the machine ca.: 1260 x 1350 x 1900 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 18,5 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4260 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD 0: 20mm (s) Ampullen/h0: mm0: mmtotal power requirement: 22 kWweight of the machine ca.: 9,2 tdimensions of the machine ca.: 4260 x 1660 x 1590 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mmdouble T-iron on the x-axis: siehe TD mmU-iron on the x-axis: siehe TD mmtotal power requirement: kWweight of the machine ca.: 0,2 tdimensions of the machine ca.: 800 x 700 x 1200mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmtotal power requirement: 7,5 kWweight of the machine ca.: 3,23 tdimensions of the machine ca.: 3200 x 2300 x 1350 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: Bandwidth / strip width min. 150mm Bandwidth / strip width max. 1,650 mm Strip thickness min. 0.4 mm Strip thickness max. 400 N/mm² 2.5 mm 300 N/mm² 3.0 mm Coil weight decoiler/ coil weight decoiler 12,000 kg Coil outer Ø / coil outer-Ø 1,600 mm

Qty. 1 Second-hand complete 12-Hi reversing cold rolling mill incl. sand blast line Mfc.: Kobelco Type: 12-Hi reversing Built: 1986 Strip width: 900 – 1250 mm Thickness: Entry: 3.2 mm Exit: 0.4 mm Rolling speed: 120/300 m/min.

Technical data : Bandwidth / strip width 1,350 mm Strip thickness / strip thickness 0.4 - 4.0 mm Coil weight 10,000 kg Speed / speed 15 m/min. Coil inners / coil inside 508 mm Coil outer / coil outer- x 1,800 mm Distance ground & reel mpine center / Distance bottom and center of reel mandrel 1,200 mm Imposition ratio / reduction ratio 1:2 Low-return / press arm Deportation sign / push-off sign

Technical data : Bandwidth / strip width 1,500 mm Strip thickness / strip thickness (420 N/mm2) 0.5 - 2.0 mm Coil weight 7,000 kg Longitudinal sections • 2 mm: 4 pcs. • 1.5 mm: 8 pcs. • 0.6 mm: 10 pcs. Shranded. / speed 20 m/min Length tolerance / length tolerance ± 0.5 mm Power / power 19.5 kW

Bandwidth / strip width 1,500 mm Strip thickness / strip thickness 0.4 - 1.5/2.0 mm Number of straightening rollers / no. of straightening rolls 6 pcs./no. Number of feed rollers / no. of feeding rolls 4 pcs./no. Longitudinal shears 3 pairs Speed 20 m/min Cross shears 1,500 x 2.0 mm Straightening rolls 100 mm Foil coating on top / foil coating on top

Strip thickness / strip thickness: 3 - 4 mm Coil weight max.: 10,000 kg Coil inner diameter/coil inner-dia.: 508 mm Coil outer diameter / coil outer-dia.: .700 mm Thorn width / mandrel width: 1,650 mm Low-return / pressure arm Separierarm / separating arm Hydr. Spread / hydr. Spreading Working dircetion: right/left; Right/left On board hydraulic pipes 24 VGS or 110 V, 50 Hz. On board hydraulic piping 24 V DC or 110 V, 50 Hz.

• Bandwidth / strip width: 1,600 mm • Strip thickness / strip thickness: 0.4 - 2.0 mm • Coil inner / coil inner-a:390-420 mm • Coil outer / coil outer-a: 1,500 mm • Spreading/ spreading: hydraulic/hydraulic • Motor drive AC servo cooling • For invertrers • Speed: 15 m/min. • Attachment segments for 500 mm • Reel shift: 200 mm • Working method: from top and bottom • Hydraulic valves on board

955LE CNC tube bending machine The machine was never working – only a few samples at the beginning. The year of production is 2015. Price +/ - 200.000,-- EUR (EXW). (Price of this NEW machine is now more than 300.000,-- EUR) alternative: another Type BMR 65 The package includes the bending machine, a KUKA robot, a pipe magazine, a material chute and a safety fence. Attached I am sending you some photos, including some from the last inspections, which describe the current status. You are welcome to visit the equipment on site.

Key data: 2040 , 2

Motorized swivel bending machine Manufacturer Fasti Type 2095-20-2 Sheet power 2040 x 2 mm at 400 N/mm2 Digital display of the bending angle Foot pedal Notaus Power connection 400V

Punching machine EDEL - Maximum power: 25to. - Extension 26 cm - Height: 170cm - Width: 65cm - Depth: 50cm Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC syst ...

Qty. 1 Second-hand strip rolling mill Mfc.: United Engineering Type: 4-Hi Built: Strip Width: 393 mm (15.5”) Thickness Entry: 4 mm (0.16”) Exit: 1.2 mm (0.05”) Mill Speed: 405 m/min. (1330 Fpm) Strip Tension: 2670 kg (5875 Lbs) Coil ID 406 mm (16”) Coil OD 1448 mm (57”) Coil weight: 3180 kg (7000 lbs)

Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear

Qty. 1 Second-hand cut-to-length line Mfc.: Ungerer Built: 1966 Material: Stainless steel Strip Width: 300 mm- 1500 mm Thickness: 1.5 mm (stainless steel) Cut length: 750 mm- 6000 mm Length adjustment: mechanical Coil weight: 9.000 kg Coil min/max inner Ø: 500 & 600 mm Shear Type: Rotary Hydraulic system Stacker capacity: 2000 ton PLC: Allen Bradley Scope of supply: Decoiler Crop shear Edge trimmer Leveller PVC film applicator Stacker Camera system