We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- 3-Roller Round Bending Machines (10)
- Axis Laser Processing Equipment (5)
- Beading Machines (13)
- Bending And Straightening Machines (1)
- Bending Machines (64)
- Bending Tools (57)
- Blanking Presses For Sheet Metal (1)
- Circular Shears (14)
- CNC Bending Machines (8)
- CNC Hydraulic Plate Shear (18)
- CNC Laser Cutting Machines (137)
- CNC Plasma Cutting Machines (29)
- CNC Pressbrakes (131)
- CNC Punching Machines (26)
- CNC Punching Nibbling Machines (8)
- CO2 Laser Marker (3)
- Combination Machines (2)
- Combined Punching, Nibbling, Forming And Beam Cutting Machines (7)
- Concrete Bar Bending Machines (1)
- Container Rotating Devices (15)
- Coper-Notcher With Punch For Profiled Materials (8)
- Coper-Notcher With Punch For Sheet Metal (1)
- Cutting off machines (1)
- Cutting-To-Length Lines (12)
- Deburring Machines (10)
- Decoilers (39)
- Feed Straighteners (3)
- Flame Cutting Units (3)
- Flanging Machines (6)
- Flat, Bar And Section Shears (7)
- Folding Machines (147)
- Guillotine Shears (100)
- Hand Lever Shears (5)
- Hand Plate Shear (3)
- Hole Punches (37)
- Hydraulic Shear (141)
- Ingot, Billet And Slab Shears (1)
- Laser And Plasma Cutting Centres (1)
- Laser Cutting Machines (62)
- Laser Cutting Presses (1)
- Laser engraving machines (7)
- Laser gas cutting installations (3)
- Laser Machines (10)
- Longitudinal Cutting Lines (18)
- Longitudinal cutting machines (2)
- Mandrel Bending Machines (3)
- Mandrel Pipe Bending Machines (10)
- Metal spinning machines (5)
- Motorized Beading Machines (11)
- Motorized Plate Bending Machines (80)
- Motorized Shears (21)
- Nibbling And Curve Cutting Shears (1)
- Nibbling Machines (6)
- Notching Machines (57)
- Other Combined Sheet Metal Working Machines (3)
- Other Metal Forming Machines (2)
- Other Sheet Metal Working Shears (2)
- Other Wire Working Machines (1)
- Pipe Bending Machines (2)
- Pipe Drawing Machines (1)
- Pipe Manufacturing Machines (5)
- Plasma Cutters (11)
- Plasma Cutting Machines (27)
- Plate And Section Shears (1)
- Plate Edge Pre-Bending Machines (3)
- Profile Bending Machines (40)
- Profile Steel Cutters (49)
- Profiling Machines (10)
- Profiling Systems (9)
- Punches (6)
- Punching Machines (56)
- Recoilers (4)
- Reel Straightening Units (3)
- Reels (7)
- Ring Bending Machines (10)
- Roll Bending Machines (6)
- Round Bending Machines (50)
- Section round bending machines (2)
- Shears For Profiled Materials (1)
- Shears For Sheet Metal Working (7)
- Sheet Metal Bending Machines (21)
- Sheet metal blowroom machines (18)
- Sheet Metal Clamp (1)
- Sheet metal cutting machines (3)
- Sheet Metal Deburring Machines (14)
- Sheet Metal Die (3)
- Sheet Metal Machining Centres (20)
- Sheet Metal Punching, Nibbling And Forming Machines (4)
- Sheet Metal Shears (11)
- Sheet Metal Straightening Machine (2)
- Sheet Notching Machines (3)
- Sheet Strip Feed Leveler (8)
- Smooth planer (2)
- Special Purpose Machines Built Up From Units For Metal Cutting Operations (1)
- Special Purpose Sheet Metal Forming Machines (1)
- Straighteners (10)
- Tape Straightening Machines (16)
- Three-roll plate bending machines (11)
- Trimming Machines (1)
- Tube Bending Machines (60)
- Universal CNC Bending Machines (4)
- Universal Lockforming (1)
- Volume bending machines (2)
- Water Jet Cutting Machines (23)
- Wire And Strip Working Machines (3)
- more
- A + N (1)
- A+B (1)
- A+B ERBEND (1)
- ABBEY (1)
- ABWICKELHASPEL (1)
- ACCURL (2)
- ACD (1)
- ACF (2)
- ACHENBACH (1)
- ADIGE (2)
- ADIGE BLM (1)
- ADIRA (2)
- AGIE CHARMILLES (1)
- AJAN (5)
- AK BEND (19)
- AK-BEND (29)
- AKYAPAK (6)
- ALBA (1)
- ALFRA (1)
- ALMI (7)
- ALMORE (1)
- ALPHA LASER (1)
- ALU (1)
- AMADA (51)
- AMADA PROMECAM (6)
- AMF SPANNTECHNIK (1)
- AMG (1)
- AMGA (1)
- AMOB (2)
- AMT (1)
- Apfel (14)
- aps (3)
- ARKU (8)
- ARLO (1)
- ARYMA (1)
- ASSERVIMENTI (1)
- ATLANTIC (17)
- ATS (4)
- AUTOMATIC (1)
- AWEA (1)
- AXIAL (1)
- B+S GROUP (1)
- BALLIU (2)
- BAUBLYS (1)
- BAUER (1)
- BAYKAL (25)
- BAZHOU (1)
- BBM (2)
- BELGIUS (1)
- BEMA (1)
- BENDMAK (1)
- Bernardo (21)
- BERNARDO, PWA HANDELS GES (1)
- BETSCHKE WEGERHOFF (1)
- Beyeler (9)
- Biegemaster (5)
- BIELOMATIK (1)
- Bihler (2)
- BLEMAS (3)
- BLM (10)
- BLM Adige (3)
- BLM-ADIGE (1)
- BODOR (5)
- BOLDRINI (2)
- BOLLINA (1)
- BOMBLED (1)
- BOSCHERT (23)
- BOSCHERT GIZELIS (1)
- BPR (1)
- Braun (3)
- BRAUN HIMMEL (1)
- BRAUN MAIER (1)
- BRONSWERK (2)
- BRONX (1)
- BRUDERER (1)
- BUCK (1)
- BURNET (4)
- BWM (3)
- BWRM (2)
- BÜLTMANN (1)
- Bystronic (68)
- BYSTRONIC BEYELER (1)
- BöLLHOFF (1)
- CAMU (1)
- CEVISA (2)
- cewe (7)
- CHESTERMAN (1)
- CHIRON CNC-FERTIGUNGSZENTRUM (1)
- CIDAN (6)
- CINCINNATI (1)
- CISAM IMPIANTI (1)
- CMS (3)
- CMS Tecnocut (2)
- CMU (2)
- CoastOne (13)
- COILTEC (1)
- COLGAR (3)
- COLLY (1)
- COLOMBO AGOSTINO (1)
- COMA FERRARI (1)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
subcategories
(3rd category level)
CNC Pressbrakes 131
Decoilers 39
Folding Machines 147
Hole Punches 37
Hydraulic Shear 141
Punches 6
Reels 7
more 1519
Manufacturer:
(Category: 107)
A + N 1
A+B 1
ABBEY 1
ACCURL 2
ACD 1
ACF 2
ADIGE 2
ADIRA 2
AJAN 5
AK BEND 19
AK-BEND 29
AKYAPAK 6
ALBA 1
ALFRA 1
ALMI 7
ALMORE 1
ALU 1
AMADA 51
AMG 1
AMGA 1
AMOB 2
AMT 1
Apfel 14
aps 3
ARKU 8
ARLO 1
ARYMA 1
ATLANTIC 17
ATS 4
AWEA 1
AXIAL 1
BALLIU 2
BAUBLYS 1
BAUER 1
BAYKAL 25
BAZHOU 1
BBM 2
BELGIUS 1
BEMA 1
BENDMAK 1
Bernardo 21
Beyeler 9
Bihler 2
BLEMAS 3
BLM 10
BODOR 5
BOLDRINI 2
BOLLINA 1
BOMBLED 1
BOSCHERT 23
BPR 1
Braun 3
BRONX 1
BRUDERER 1
BUCK 1
BURNET 4
BWM 3
BWRM 2
BÜLTMANN 1
Bystronic 68
BöLLHOFF 1
CAMU 1
CEVISA 2
cewe 7
CIDAN 6
CMS 3
CMU 2
CoastOne 13
COILTEC 1
COLGAR 3
COLLY 1
COMAC 2
COMACA 3
COMESSA 1
CORMAK 1
CORNO 1
CSM 1
DAI HYUN 1
DAKO 1
DALMEC 1
DAMAMT 1
DANOBAT 2
DARLEY 12
DAVI 5
DENER 4
DERATECH 1
DESTACO 1
DIGEP 2
DIMECO 3
DMF 1
DMG 4
DOLAST 1
DONEWELL 2
Dreher 7
Dräco 2
DUMETA 16
DURMA 69
DYNOBEND 2
EAGLE 3
ECKERT 13
ECKOLD 64
Eclair 2
EDEL 12
EHT 23
EIGL 1
ELMEA 1
Elumatec 8
EMMEGI 1
ERBEND 1
ERCOLINA 15
ERMAK 44
Ermaksan 4
ERNST 2
ESAB 9
ESPE 1
EUEN 1
EURAM 21
Euromac 10
EVERS 1
FACCIN 20
FAGOR 1
FALKEN 11
Farina 2
Fasti 63
FEMAS 1
FIBRO 3
FICEP 1
FIM 1
FIMI 2
FINN POWER 15
Finn-Power 12
FINTEK 1
FISCHER 6
FJELLMAN 1
FLADDER 1
Flow 6
FOBA 2
FOMP 1
FORMAT 1
FORST 1
Forstner 2
FRAMECAD 3
FRECH 1
FUJICAR 1
G-WEIKE 1
GABELLA 2
GABRO 1
GECAM 3
GECKO 1
Geka 29
GESIPA 1
GFI 1
approved
dealer
dealer
angle steel/side length: unbkt. mmdouble T-iron on the x-axis: unbkt. mmU-iron on the x-axis: unbkt. mmtotal power requirement: 30 kWweight of the machine ca.: 8,6 tdimensions of the machine ca.: 2500x2000x1900 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
: 50 (500) mm: 45 (500) mmL-beam: 80 x 80 x 8 (800) mmT - beam - web outwards: 80 x 9 (800) mmAxis diameter: 60 mmwork speed: 5,0 m/minTool diameter: 195 mmtotal power requirement: 3 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: 1,2 x 0,9 x 1,2 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 1000 mmplate thickness: 5,0 mmdistance between columns: 1070 mmdiameter of upper rolls: 130 mmtotal power requirement: 4,0 KWweight of the machine ca.: 1,15 tdimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm- Electrically adjustable rear roller- Electrically adjustable lower roll (material clamping)- Digital readout for rear roller movement- Digital readout for lower roll movement (material clamping)- Hardened rolls- Conical rolling- Swiveling top roll- Brake motor- Emergency stop- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
plate thickness: 1,6 mmpressure: 450 MPa: 150 x 150 x 90° table surface area: 650 x 500 mm: 875 mmcutting angle - upper blade: 4 °weight of the machine ca.: 75 kg• manual notching machine with lower frame • sheet thickness (steel 450MPa) to 1.6 mm, aluminium to 2.25 mm, plastic to 3.0 mm,• machine for demonstrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 2020 mmplate thickness: 1,5 mmdistance between columns: 2050 mmDaylight opening: 100 mmtotal power requirement: 0,75 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 2,7 x 1 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
plate thickness: 1,25 mmroll-body distance: 250 mmthroat: 260 mmdistance between roll centers: 62 mmtool adaptor: 26 mmspeed: 6,3 m/mintotal power requirement: 0,7 kWweight: 170 kgrange L-W-H: 1020x600x1500 mmDomestic equipments:- motor driven beading machine- 5 sets of bead rollers- Footswitch- Operating instructions in German- CE mark / Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 1500 mmplate thickness: 1,5 mmdistance between columns: 1500 mmbending angle max.: 135 °total power requirement: - kWweight of the machine ca.: 0,36 tdimensions of the machine ca.: 1,7 x 0,7 x 1,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 8mm total power requirement: 15 kWweight of the machine ca.: 14,1 tdimensions of the machine ca.: 6310 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 13mm total power requirement: 22 kWweight of the machine ca.: 21,3 tdimensions of the machine ca.: 6560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
angle steel/side length: siehe TD mmdouble T-iron on the x-axis: siehe TD mmU-iron on the x-axis: siehe TD mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,385 tdimensions of the machine ca.: 930 x 730, x 1400mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 11 kWweight of the machine ca.: 4,570 tdimensions of the machine ca.: 3830 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 15 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4260 x 1160 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 30mm (S) total power requirement: 37 kWweight of the machine ca.: 15,3 tdimensions of the machine ca.: 4510 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16 total power requirement: 37 kWweight of the machine ca.: 23,81 tdimensions of the machine ca.: 6560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
angle steel/side length: siehe TD mmdouble T-iron on the x-axis: siehe TD mmU-iron on the x-axis: siehe TD mmtotal power requirement: kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 1000 x 700 x 1380mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Press brake TRUMPF TrumaBend V 85 Year of construction 1999 Machine specifications: working length 2050 mm - Stand passage 1750 mm - pressing force 850 kN - Distance table / plunger 410 mm - Stand projection 410 mm - Plunger stroke 285 mm - Lifting speeds - Downward speed rapid path 200 mm/sec - Upward speed 135 mm/sec - Downward press speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx.B 3700 x H 2700 x D 2100 mm - Weight approx. 8000 kg
approved
dealer
dealer
VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg
approved
dealer
dealer
specifications: - Pressure capacity 100 KN / 10 t - Compressive force adjustable 0 - 100 kN - Stroke length 0 - 150 mm - Clear width approx. 200 mm - Lifting speed 0 - 0.6 m/min - Tool height up to approx. 100 mm - Bending performance - with prism MW 100 flat to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Directional power Wy at straightening block distance of 1m 100 cm³ - Drive 400 V / 1.1 kW - Space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg
approved
dealer
dealer
Hydraulic swivel bending machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper cheek, backgauge (1000mm), goat feet with automatic tool clamping, electr./hydr. Adjustment of the bending cheek -Illustrations similar-
approved
dealer
dealer
plate thickness: 2,5 mmroll-body distance: 260 mmthroat: 500 mmdistance between roll centers: 92 mmtool adaptor: 35 mmspeed: 3,5 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 295 kgdimensions of the machine ca.: 1200x700x1200 mmDomestic equipments:- motor driven beading machine- 3 sets of bead rollers- Footswitch- Operating instructions in German- CE mark / Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
round bar steel: 50 mmsquare edge steel: 40 x 40 mmL-beam: 140 x 13 mmPunch power: 900 kNhole punching press: throat: 510 mmhole punching press: max. length of stroke: 29 mmhole punching press: capacity (dia. x thick.): 31 x 20 mmnotching: l + T material: 80 x 14 mmno. of strokes: 40 / 45 Hub/mintotal power requirement: 4 kWweight of the machine ca.: 3,7 tdimensions: 2,1 x 0,7 x 2,12 mAccessories: various punches and diesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 160 tchamfer lenght: 4000 mmdistance between columns: 3060 mmcontrol: FORTRON CNC 10 H 4 throat: 280 mmstroke: 250 mmdayligth: 500 mmtable length: 4050 mmtable width: 280 mmfeed down: 70 mm/secfeed up: 68,4 mm/secworking feed: 9 / 3,5 mm/secoperating pressure: max. 205 baroil volume: 400 ltotal power requirement: 19,5 kWweight of the machine ca.: 20,8 tTotal weight including accessories: 22 tdimensions of machine L x W x H: 4,8 x 1,88 x 2,93 mdimensions of switch cabinet: 1,6 x 0,5 x 2,25 mAcc.: programmable back gauge, upper and lower dies, table extensionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 6 total power requirement: 7,5 kWweight of the machine ca.: 4,340 tdimensions of the machine ca.: 3830 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 8mm total power requirement: 15 kWweight of the machine ca.: 9,7 tdimensions of the machine ca.: 5310 x 1660 x 1590 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
item-No.: 155678691
new
sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmpre-bending: siehe TD total power requirement: 3 kWweight of the machine ca.: 1,06 tdimensions of the machine ca.: 1260 x 1350 x 1900 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 18,5 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4260 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD 0: 20mm (s) Ampullen/h0: mm0: mmtotal power requirement: 22 kWweight of the machine ca.: 9,2 tdimensions of the machine ca.: 4260 x 1660 x 1590 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
angle steel/side length: siehe TD mmdouble T-iron on the x-axis: siehe TD mmU-iron on the x-axis: siehe TD mmtotal power requirement: kWweight of the machine ca.: 0,2 tdimensions of the machine ca.: 800 x 700 x 1200mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmtotal power requirement: 7,5 kWweight of the machine ca.: 3,23 tdimensions of the machine ca.: 3200 x 2300 x 1350 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Technical data: Bandwidth / strip width min. 150mm Bandwidth / strip width max. 1,650 mm Strip thickness min. 0.4 mm Strip thickness max. 400 N/mm² 2.5 mm 300 N/mm² 3.0 mm Coil weight decoiler/ coil weight decoiler 12,000 kg Coil outer Ø / coil outer-Ø 1,600 mm
