milling machines used for sale (2,331)

Key data: 800 mm, 670 mm, 500 mm

High-speed milling machine for graphite machining Year of manufacture 2004 with a lot of accessories such as collets, graphite vacuum cleaners, etc.

Collet set 15 pieces with drill chuck Vertical Drilling and Milling Head - T-Slot Width 12 mm Cutter head Coolant Setup x - travel 500 mm y - travel 200 mm z - travel 400 mm Feed: 5.6 - 238 mm/min with quill stroke Speed: 35.5 - 1800 rpm with rapid traverse Clamping area: 800 x 300 mm Total power requirement 16 A Spindle holder ISA 40 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

x-travel: 4000 mmy-travel: 1500 mmz-travel: 3500 mmControl: Siemens 840D tool taper: ISO 50 spindle turning speed range: 5000 U/minpower capacity at 100 % load: 37 kWmax. torque on the spindle: 1296 Nmrapid traverse X/Y/Z: m/minmilling head -swivable: Gradtoolpiece magazine: chain magazine: 40 Stücktable surface area: dia 1500 mmtable load: ja 12 ttotal power requirement: kWweight of the machine ca.: tTravelling column milling machine with- control Siemens 840D- autom. Bi-rotativ milling head, 1x1°, 5000 U/min- tool changer 2x 40-fold (ISO 50)- chip conveyor- 2 Rotary Tables (dia 1500mm)- Renishaw RMP 60- Laser Sensopart- Coolant (Through Spindle and External)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5000 mmy-travel: 2500 mmz-travel: 1500 mmControl: Typ Fidia C20/6H-SB total power requirement: 90 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24245 Specifications: - Feed of the milling unit pneumatically - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - Max. profile height 190 mm - Max. milling depth 110 mm - Max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - Milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross fence - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

x-travel: 600 mmy-travel: 450 mmz-travel: 450 mmcontrol: PHILIPS CNC 432 table surface area: 740 x 440 mmspindle taper: SK 40 spindle turning speed range: 20 - 5000 U/minfeeds: 1 - 4000 mm/minrapid traverse: 6 m/minquill stroke: 80 mmtoolpiece magazine: chain magazine: 30 Postool diameter if 2 vacant positions: max. 130 mmtool diametre at full load: 100 mmtool length - max.: 250 mmweight of tools max.: 8 kgtotal power requirement: 15 kVAweight of the machine ca.: 3,8 tAccessories: vertical head with hydr. tool clamping and quil retraction, univ. table (manual), electron. handwheel, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine 4-axis (15995740874) DMG Milltap 700 (2015) Spindle 24,000 1/min NC parts apparatus Lehmann EA-510. L Tool magazine 25 places Renishaw Measurement Kit Rinsing gun Milling machine 5-axis (15995747284) DMG Milltap 700 (2015) Spindle 24,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Rinsing gun Renishaw Measurement Kit Milling machine 5-axis (15995765944) DMG Milltap 700 (2018) Spindle 10,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Renishaw Measurement Kit Automatic front door Automation interface including automation door on the right Milling machine 5-axis (15995734744) + WH3 (770200062R) DMG Milltap 700 (2014) Spindle 10,000 1/min Swivel rot ...

Hermle B300 Universal Machining Centre (5-axis): Year of construction 2012 Heidenhain iTNC530 control with DXF import option Tool magazine with 30 places Tool holder HSK-A 63 spindle with 15,000 rpm IKZ with 40Bar Blowing air through spindle center Blum Laser Tool Measurement Heidenhain Probe TS440 Oil and Emulsion Separation Plant Rinsing gun Zero-point clamping system: Partool Powergrip 160 (4-fold) Weight: approx. 7.5t Machine times (as of 04/2024): Machine on: 20.272h Spindle on: 6.618h

DMG DMU 75 monoBLOCK universal machining centre (5-axis): Year of construction 2015 Travel 750 mm x 650 mm x 560 mm Heidenhain TNC640 control system with DXF import option Tool magazine with 60 places Tool holder HSK-A 63 Spindle with 18,000 rpm Production package with scraper belt conveyor Coolant system 600 litres with IKZ 40Bar Blowing air through spindle center Blum Laser Tool Measurement Heidenhain Probe TS649 Oil and Emulsion Separation Plant Rinsing gun Operating mode 4 Zero-point clamping system from Lang Weight: approx. 9.5t Machine times (as of 04/2024): Machine on: 16.665h Spindle on: 3.386h

Key data: 1120 mm, 345 mm, 400 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. coolant device Electric tensioner, bracket cover

max. wheel diameter: 200 mmgear width: 400 mmmax. module: 4,5 min. module: 0,3 weight of the machine ca.: 6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm

Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg

Clamping pads, fork clamping iron, tension screws clamping stops, clamping pins; Step claw

Specifications: Workspace X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working spindle Tool holder: ISO 40 Auto. Feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 1/min, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Rigid table: 700 x 350 mm, 5 T-slots Rigid table: max. load capacity of 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Dimensions: 3200 x 4100 mm, height 1920 mm Equipment: - CNC control - Rigid table - Milling head swivels +/- 90° - Hydr. Clamping device - Coolant device - Emergency stop push button

Universal milling and drilling machine KUNZMANN WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...

Type: Milling Machine/Machining Center Ident Number: 22367 Category: Milling Machines Manufacturer: Mikron Model: HSM 500 Year of construction: 2006 Travel: 500 x 450 x 360 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Control: Heidenhain iTNC 530 Spindle mount: HSK 32 E Spindle speed: 54000 rpm Table size X: 550 mm Table size Y: 450 mm max. workpiece weight: 200 kg Tool changer: 40 speed Conveyor Laser probes for tools Probe PS 32 Infrared / HSK 32 E Minimal lubrication Oil Mist Extraction Device APS Advanced Process System ITC Intelligent Heat Control Mobile handwheel

Type: Milling Machine/Machining Center Ident Number: 22592 Category: Milling Machines Manufacturer: Exeron Model: HSC 500 Year of construction: 2016 Travel: 620 x 570 x 350 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Spindle mount: HKS 40-E Spindle speed: 42000 rpm max. workpiece weight: 350 kg ITNC 530 Software 30-speed WZ changer Spindle HSK40 Blumlaser Tool Measurement Renishaw Probes Aspirator Oil mist extraction Minimum quantity lubrication

Key data: 500 mm, 250 mm, 260 mm

quill stroke 480 mm , table 800x320 , max. 300 kg , SF 32 , 100-9.000 rpm , 5kW , 60 Nm , Heidenhain TNC 124 ,

X-axis: 3000 mm Y-axis: 800 mm Z-axis: 720 mm Rapid traverse: X/Y/Z axis: 50m/min Control: SIEMENS 840D Recording: SK40 Speed: 18,000 rpm Mileage: total approx. 5,000 hours (of which approx. 500 hours since the overhaul) Spindle motor: 321V - 116 A Work table: W 3500 x L 820 mm Dimensions: L 5250 x W 4046 mm Drives: SIEMENS The machine is a 5-axis machine, where the turntable is both vertical, as well as horizontally. - Subject to technical errors and prior sale. -

Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos

CNC Manufacturing Center Mill 2000 Commissioning 2007 4 - 5 axis machine Siemens 840 D Commuting X axis 2000 mm y axis 500 mm Z axis 550 mm 40 tool slots Rigid table with chip tray Clamping surface 2600 mm 550 mm with 3 T-slots High-speed package Rapid traverses 60 m/min Speed 20 - 12,000 rpm Coolant pump 30 bar 900 liters 2 extraction units as air purifiers Automatic grease lubrication 2x Rinsing gun Single-shift operation Spindle has been renewed and much more. The machine can be viewed under power

Key data: 310 mm, 170 mm, 340 mm

Built in 1990, with 3-axis digital display. Spindle holder ISO 40, travels 310 x 170 x 340 mm, 16 spindle speeds from 40 - 2000 rpm, 16 feeds from 9 - 450 mm/min, motor power 1.2/1.8 kW, weight 700 kg. The machine is in good condition.

Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital display Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 124 Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic Handwheel for X, Y, Z Axis Splash protection booth Machine light 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

Sell a milling machine with some accessories. The milling machine works. Suitable for smaller metal construction companies.

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHeidenhain TNC 310 cnc controlelectronical hand wheelcoolant deviceTechnische Daten:Längsweg (X-Achse) / X-travel longitudinal 600 mmQuerweg (Y-Achse) / Y-travel cross 400 mmSenkrechtweg (Z-Achse) / Z-travel vertical 400 mmWerkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-3700 UpMVorschub / feed 0-2000 mm/min.Eilgang längs + quer / rapid feed x/y 5 m/min.Eilgang senkrecht / rapid feed z 4 m/min.Antriebsleistung gesamt / drice capacity 7 kWGewicht ca. / weight ca. 2000 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with Mo ...

Key data: 300 mm, 350 mm, 200 mm

Travel of the axles: X: 300 mm Y: 350 mm Z: 200 mm Weight: approx. 800 kg

Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slab Miller Strip width: 30” – 762 mm Cutter Speed: 500 rpm Metal speed: 18 fpm (1.9 m/min.)) Capacity: min. ¼” max. 1-1/4” Thickness Entry thickness range: 13 – 20 mm

Key data: 420 mm, 250 mm, 350 mm

with Heidenhain TNC 114 digital display Tool holder ISO 40/M16 Travel X/Y/Z 420 x 250 x 350 m 12 spindle speeds from 50 - 2240 Weight approx. 900 kg Central lubrication Bellows NEW! Accuracy in: X-axis 0.005/300 mm Y-axis 0.006/250 mm Z-axis 0.01/300 mm Spindle concentricity 0.003 mm Angular accuracy 0.01/250 Spindle clearance X 0.12, Y 0.04, Spindle noise: very good Very good overall condition!