Other Milling Machines used for sale (25)

We are pleased to offer for sale a complete high-precision manufacturing cell designed for the production of long, helical and screw-profile components, including PCP and mud motor rotors, extruder and injection molding screws, compressor and pump spindles. The equipment includes: 1. 2008 LEISTRITZ PW190.8000.HP Peeling / Whirling — Fully Operational Capacity: 120 mm (4.72”) diameter × 8,000 mm (315”) length Machine weight: 92,594 lbs (42,000 kg) 2. 2011 LEISTRITZ LWN300 Milling / Hobbing — Fully Operational 3. 2009 LEISTRITZ PW300PM Milling / Hobbing — Not in Service 4. 2014 WEINGÄRTNER FINISH 450 Finishing / Polishing — Fully Operational This equipment forms a comprehensive production route covering roughing, profile machining, semi-finishing and final surface finishing of long, high-precision helical and screw-profile components. Typical applic ...

Auction-ID: A1-50750-435

2x double spindle milling machine Walther Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Equipped with: has a table of 1350 × 320 mm, a longitudinal travel of 700 mm, a transverse travel of 240/260 mm, a vertical travel of 370 mm, 18 spindle speeds of 31.5–1600 rpm, a main motor of 7.5 kW, a number 3 spindle cone, a spindle bore of 29 mm, a swivel range of ±45°, a maximum workpiece weight of 250 kg Auction-ID: A1-47365-10

Year of Make: 2015 Machine type: BC 1001 HS Total production hours: 1608h Total standby time: 5070h

Auction-ID: A1-50750-635

Milling machine TOS KURIM FRO 6, FRO8

Voltage: 220 V, Frequency: 50/60 Hz, Motor power: 0,75 kW, Motor speed: 2850 rpm, Max. machinable profile height: 90 mm, Max. machinable profile width: 120 mm, Arbor diameter: Ø30 mm, Max. blade width: Ø140 mm. Auction-ID: A1-50595-8

Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Power supply: 380V, 3 ph, 50 Hz, Total electrical power: 1.1 kW, Air consumption: 5 lt/min + spray cooling, Air pressure: 6-8 bar, Spindle speed: 15350 rpm, Min. machinable profile height: 20 mm, Max. machinable profile height: 115 mm, Max. machinable profile width: 110 mm, Router cutter dimensions: 8x5x80/120mm. Auction-ID: A1-50595-43

Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 1,1 kW, Water slot milling spindle motors: 2 x 0,55 kW / 220 V / 3ph / 300 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm. Auction-ID: A1-50595-38

Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 0.75 kW, Copy router spindle motor: 0.75kW / 220 V / 3 ph / 50 Hz, Air consumption: 5 lt/min + spray cooling, Air pressure: 6-8 bar, Spindle speed: 14000 rpm, Min. machinable profile height: 20 mm, Max. machinable profile height: 130 mm, Max. machinable profile width: 130 mm, Router cutter dimensions: 8x5x80/120mm. Auction-ID: A1-50595-20

2 router cutters, each with an 8 mm cutting diameter and an 8 mm shank diameter, Motor power: 1,1 kW + 1,1 kW, Motor speed: 12000 rpm, Power supply: 380 Vac - 3 phases, Air consumption: 8 l/min. Auction-ID: A1-50595-30

Electrical supply: 220Vac/50Hz, Motor power: 0.85kW, Motor speed: 32000 rpm, Profile routing height: min. 40mm, max. 100mm, Cutter diameter: 8mm/5mm/80mm Auction-ID: A1-50595-5

Power supply: 380V, 3 ph, 50 Hz, Electrical power: 0,75 kW, Copy router spindle motor: 0,75 kW / 380 V / 3 ph / 50 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm, Copy routing capacity: x: 260mm / y: 105 mm / z: 90mm, Router cutter dimensions: Length: 80-120 mm / Diameter: Ø8mm. Auction-ID: A1-50595-15

General Description Horizontal milling machine, exported by Stankoimport. Designed for milling, slotting and general machining operations. The machine is equipped with a horizontal arbor spindle and supplied with installed milling tooling and a table-mounted clamping fixture. Technical Details Machine type: Horizontal milling machine Exporter: Stankoimport Horizontal arbor spindle T-slotted work table Multiple milling cutters mounted on the arbor Table-mounted clamping fixture included Manual X/Y/Z table feeds Mechanical feed gearbox with feed and spindle speed selectors Condition Used industrial condition. The machine appears complete with horizontal spindle, arbor, milling cutters, T-slotted table and clamping fixture installed. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-24

General Description Horizontal milling machine designed for milling, slotting, gear cutting and general machining operations. The machine is equipped with a horizontal spindle and arbor carrying multiple slitting saws and side-and-face milling cutters, making it suitable for production and toolroom applications. Technical Details Machine type: Horizontal milling machine Horizontal spindle with arbor installed Multiple slitting saws and side-and-face cutters mounted on the arbor T-slotted work table Manual X/Y/Z table feeds Mechanical feed gearbox Feed and spindle speed selector dials Condition Used industrial condition. The machine appears complete with horizontal spindle, arbor, milling cutters, T-slotted table and feed gearbox. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-23

Router / slot milling machine (Kopierfräse) designed specifically for processing aluminum and PVC profiles in window, door, and frame manufacturing. Slot Milling & Routing: It cuts lock cases, handle holes, cylinder slots, and water drainage slots into extruded metal or vinyl profiles. Copy Functionality: A stylus/tracer follows a template (copy plate) while guiding the overhead high-speed router cutter to replicate exact cutouts on the profile. Multi-Axis Tooling: Features a vertical copying router spindle on top and a horizontal slotting unit below for combined machining operations. Auction-ID: A7-50717-9

Mikron HSM 800 – High-speed machining centerbuilt in 2007 | Heidenhain iTNC 530 | 24,000 rpm |High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC machining in mold making, graphite and electrode areas as well as for flexible series production. Travel distances of X 800 mm / Y 600 mm / Z 500 mm with a pallet size of 800 x 600 mm. Equipped with a 3-fold pallet changer for efficient production processes. The machine has a high-speed spindle with up to 24,000 rpm, HSK-A63 adapter and a 50-fold tool changer. Extensive equipment including IKZ high-pressure system (18–70 bar) with belt filter, chip conveyor, minimum quantity lubrication, oil mist extraction, rotating viewing window and measurement technology (M&H). Additionally equipped with APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process reliability and ...

Auction-ID: A1-50090-120

Edge milling machineon trolleysee picturesCondition: untested (6) Auction-ID: A7-50523-816

Auction-ID: A1-50090-121

Maximum 15 mm, diameter 400 mm Auction-ID: A1-50090-172

Table surface: 1.524 x 355 mm , Width of slots: 18 mm , Longitudinal travel of the table: 3 - 1016 mm/min. Fast traverse 2.400 mm/min , Transversal travel of the table: 3 - 1016 mm/min -Fast feed 2,400 mm/min, Distance between slots: 100 mm , Number of Slots T: 3, Longitudinal travel: 1.220 mm , Transversal Race: 508 mm , Vertical travel: 508 mm, Spindle cone: ISO 50 , Main engine power: 7,36 Kw, Voltage: 380/220 V, Included Accessories: Dimension display, faceplate axes, cutters, shims, cones, chucks