Copy Milling Machines used for sale (13)

3-sided machining in one clamping Speed: 12,000 revolutions per minute 2 pneumatic copy pins at the bottom, 1 copy pin at the top Pneumatic material clamping Minimum quantity spraying device Milling area vertical (top): 330 x 130 mm Milling area horizontal (from front or rear): 220 x 95 mm Stroke: 110 mm With lateral stops Weight: approx. 350 kg

x-travel: 700 mmy-travel: 560 mmz-travel: 450 mmtotal power requirement: 3 kWweight of the machine ca.: je 2,5 tdimensions of the machine ca.: je 332,5 mBundle 6 x KF 3 S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26048 Technical data: - 3 sides – machining in one clamping for lock and PZ punches, - etc. to be milled out in aluminium / plastic / steel profiles - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Manual profile bar turning device for 3-sided machining - Working range - x (landscape) 250 mm - depending on position - y (longitudinal) 90 mm - depending on position - z (vertical) 120 mm - max. Profile height depending on position approx. 120 mm - max. Profile depth 100 mm - Spindle speed approx. 6000 + 12000 rpm - Pneumatic connection 8 bar - Drive 400 V / 1.5 kW - Space requirements approx. W 650 x H 1550 x D 850 mm - Weight approx. 340 kg

x-travel: 700 mmy-travel: 560 mmz-travel: 450 mmtotal power requirement: 4 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 3 x 3 x 2,2 mNo. 0104Universal copy milling machineDECKEL KF 3 Sbuilt in 1979 with divided coordinate tableWorking area: 700 x 560 x 450 mmDrive power: 3 kWAccessories:Divided coordinate tableFinishing spindleLocking armControl handle with cableStylus holderColletsSpace requirement 3 m x 3mWeight approx. 2,380 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressta Eisele Panto 300 copy milling machine - Very good condition - With frequency converter and HF motors - With stop system

Specifications Working range 250 × 700 mm Copying table size 430 × 600 mm Stroke / working area longitudinal (X) approx. 322 mm Stroke / working area transverse (Y) approx. 200 mm Spindle drive / power approx. 1.5 / 1.7 kW Spindle speed (spindle speed) approx. 80 – 20,000 rpm Copy scale ratio (enlargement / reduction) 1:1 to 1:4 Overall dimensions (approx.) 2,000 × 2,000 × 2,000 mm Weight approx. 1,650 kg

Year: 2010 technically efficient, ready to work – after full service rotary table (3-sided profile machining) cooling and lubrication system copying template compressed air preparation station pneumatic clamps (4 vertical and 2 horizontal)

Milling Depth:110mm Milling spindle speed:12000rpm Max. milling paths: 290 x 120mm Diameter of the copy pen: 5mm and 8mm Compressed air connection:6-8bar Weight:200kg

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute can be preselected, so that both steel and aluminium profiles can be machined 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 12,000 revolutions per minute 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

Year: 2011 - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders - cooling and lubrication installation

Key data: 180 mm, 300 mm, 60 mm

Two-spindle copy milling machine, Elumatec KF 78 / 60 Used & Functional For machining aluminium or steel profiles E.g. window construction With vertical and horizontal milling motor, spraying device and pneumatic clamping device Specifications: Profile height: 60 mm max Milling area horizontal: 180 x 70 mm Milling area vertical: 300 95 mm Stroke: 110 mm Bore speed: 6000 rpm Milling speed: 12000 rpm Air consumption per cycle: 12l Drive power: 740/800w Installation dimensions: (HxWxD) 160 x 280 x 110 Weight approx. 270kg

x-280 ,y- 200 , Z 315 , Table dimensions 380x380/250x500 A lot of writings,much more than pictured