milling machines used for sale (2,385)

Stable milling machine - Made in Taiwan - New - unused 3 Axis Digital Display - Heidenhain Scales Electronic handwheel for driving machine ashes by hand Tool spindle vertical and horizontal Tool holder steep taper 50 Max. spindle speed 1,600 rpm Travel X 1100 mm Travel Y 720 mm Travel Z 780 mm Table clamping surface 1500 x 450 mm Max. workpiece weight 1000 KG Rapid traverse of the machine axes 6000 mm/min Infinitely variable axle feed can be adjusted via potentiometer Coolant system Chip protection on the router table

Ref. -No.: 10373Manufacturer: SORALUCEYear of construction: 2017Type of control: CNCControl: Heidenhain 530iStorage location: HalberstadtCountry of origin: SpanienX-Travel: 6500 mmY-Travel: 1600 mmZ-Travel: 900 mmTable-Size (Lxw): 8000 x 900 mmDrive power spindle: 28 kWSwivel range milling head: 2,5 °Tool Taper: SK 50 Feed rate: 15000 mm / minFurther information:- Number of axes = 3 + 2- incl. Swivel head

Ref. -No.: 10164Manufacturer: DECKEL MAHOYear of construction: 1986Type of control: CNCControl: CNC 432Storage location: HalberstadtCountry of origin: DeutschlandTotal connected load: 40 kVAX-Travel: 800 mmY-Travel: 450 mmZ-Travel: 500 mmFeed force (X, Y, Z): X 800, Y 24000, Z 8000 NQuill Stroke: 100 mmSpeed work spindle: 20-4000 RPMFeeds X/Y/Z: 1-3000 m / minRapid Traverse X/Y/Z: 8 m / minTool Taper: ISO 40 Space requirements: 3680 x 3780 x 2720 LxWxH (mm)Further information:Additional information:- with controlled rotary table Ø800 (B axis)- simultaneously controlled axes: 3- axes controlled one after the other: 4

x-travel: 290 mmy-travel: 170 mmz-travel: 310 mmtable surface area: 600 x 215 mmspindle taper: SK 40 spindle turning speed range: 50 - 2500 U/minfeeds: 9 - 450 mm/minquill stroke: 70 mmtotal power requirement: 1,8 kWweight of the machine ca.: 860 kgdimensions of machine L x W x H: 1,06 x 1,05 x 1,33 mAccessories: vertical head with quill retraction, solid table, counter bearing, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 7000 mm, 1600 mm, 800 mm

Complete system with all the accessories necessary for installation and operation, Travel x = 7000 y = 1600 z = 800 / transverse stroke w = 600mm / General overhaul 2007, year of production 1991: New Siemens Sinumerik 840D control system, new drive motors, guide guides refurbished, new control cabinets. ECOCUT 1 was then operated for only a few months / Travel speed 12000 mm / min / w axis 6000 mm / min turntable TDV 2 max. workpiece weight 6t / clamping surface 1000x1000 turntable TDV 3 max. workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angle crank / chain tool change system / plate field / complete housing / Knoll hopper feed / suction / coolant system with belt filter All BWF fixators for the installation of machine bed and plate

Deckel Maho Universal Machining Center CNC DMU 70 VL Deckel Maho Manufacturer [manufacturer]: Deckel Maho (DMG) Typ [ type]: DMU 70 VL [control unit]: Heidenhain TNC 430C Jahr [construction year]: 2002 Travel range [travel path]: X= 710mm Y=520mm Z=520mm spindle rotation speed: 20-18,000 rpm Main spindle power: 36 kW IKZ internal coolant supply Tool changer: 2 x 32 places Tool holder: SK 40 to DIN2080 Cooling system: Knoll Chip conveyor: 2 units/units Weight [weight]: 12.800kg Dimensions [needed space]approx. (L x W x H): 5.3m x 2.75m x 2.75m Technical documentation/documents available in detail

x-travel: 2050 mmy-travel: 1100 mmz-travel: 800 mmControl: FANUC 18iM Super CAP II total power requirement: 22/26 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 6,25 x3,3 x 3,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dialog 11 Control Speed range 40 - 4000 rpm Rapid traverse 4 m/ min Tool holder SK 40 Feed rate 2 - 3600 mm /min, infinitely variable Connected load approx. 10 kVA Travel X/Y/Z 300 / 300 /400 mm Working spindle vertically and horizontally Extendable quill 80 mm Milling head swivel +/- 90° Accessories: coolant device, electr. Handwheel Cabin with protective device ( When opening of the cabin door stops the milling spindle ). Very good original condition! The axes and milling spindle run quietly and precisely. Geometry in X/Y/Z axis 0.015/0.01/0.015 mm Spindle concentricity to 300 mm/0.012 mm Price: 8500,- EUR excl. VAT free loaded from warehouse Tirschenreuth

Lid milling machine FP4MA-2204 Year of construction: 1987 Serial no.: 20965 Controls: Contour 2 Condition: fully functional

Knuth UFM 2 Universal Milling Machine Specifications X-axis travel (manual) 800 mm X-axis travel 750 mm travel Y-axis 300 mm travel Z-axis 400 mm Table size 1320x320 mm T-slots 5x14x63 mm Feeds Y-axis travel (8) 20 - 360 mm/min Z-axis travel 600 mm/min Spindle speed (12) 58 - 1800 min-1 Vertical spindle taper SK 40 Distance between spindle tip and table 0 - 400 mm Head rotation 45° Cone of the SK 50 horizontal spindle Drive Main engine power 4 kW Motor power in the Z-axis 0.75 kW Feed motor power 0.55 kW Cooling pump motor 0.09 kW Coolant pump capacity 25 l/min Dimensions and weight Dimensions: 1900x1720x1750 mm Weight 2100 kg More items - new and used - can be found in our shop! International shipping costs on request!

Profile Machining Center Machining length approx. 8,500 mm, max. profile size 300 x 200 mm, Travel XYZ = 9,300 x 1,000 x 800 mm, Sawing unit (mitre cuts), 4-axis drilling/milling unit (16 kW, 18,000 rpm), tool changer 24-fold option pendulum operation, option Clamping element displacement, preparation Flowdrill, , safety enclosure, BECKHOFF control panel (programming software CamQuix), refrigeration unit IDEA 16CCM-50-A-F-3 (No. C2019010009, year of construction 2019), Control cabinet, machine under power in production use Original price 176.500 EUR

x-travel: 350 mmy-travel: 240 mmz-travel: 340 mmturning speed range: 20 - 6.300 U/minfeed speeds: 1 - 5.000 mm/minrapid traverse: 5 m/mintool taper: SK 40 power capacity: 6,3 / 10 kWcontrol: Sinumeric 810 D tool change unit: pneumatisch manuelltotal power requirement: kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: ca. 2 x 2 m110653528345-sided universal milling machineRotary table with swivel axis (clamping surface 400 x 290 mm)Rotation range C-axis displayed 360 ° on the screenB-axis swivel range +105 / -15 ° shown on the screenTable load capacity 100 kg,Operating modes 2 and 3, prepared for Net service, programming instructionsincluded, RS 232 C interfaceOperating mode 4 (extended manual intervention)Accessories: coolant device, electronic handwheelMachine is workshop tested and with electricalAcceptance reportThe data for this ad was created with ModulMWS - the so ...

Travel: X, Y, Z 595mm x 400 mm x 450 mm Speed range from 30 - 1,800 rpm for horizontal and vertical Milling head to turn to the right and left with quill 75 mm Tool holder SK 40 Machine number 80003 Accessories: 3-axis digital display Heidenhain

Excellent general condition. Used by plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting forces, low machine load... Travels x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / drive power main spindle 11 kW feed speed 0 - 30 m/min / Table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max Wzg diameter 63mm / WZG length 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, Type TS 220 / Coolant device / chip conveyor / extraction (optional) Complete enclosure Heidenhain control type TNC 426 PB digital / electronic handwheel Heidenhain HR 410

Gear milling machine Micron 106 16 A 380 V

Lid FP4A Id No. 2284-0242 CNC 2301 control x 560 y 500 Z 450 Weight 2.2 t Hydraulic Data Machine has a malfunction in the startup procedure !

Horizontal milling machine Table length 65 cm x 400 mm y 120 mm Z 300 mm Length 1.20 m Width 1 m Height 1.60 m Vice

Universal milling machine UF20 LVQE Table Y 320 mm X 1200 mm Z 800 mm Table length 1.55 m Speeds: 45 - 2000 rpm 16 A 380 V Length 1.30 m Width 1.20 m Height 1.90 m Swivel head Coolant pump Feed Accessories

horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg

Universal milling machine Speed 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Feed rate in x electric Coolant pump Accessories Weight 1 ton

Horizontal milling machine Reckermann EW 900 Pony TNC 135 380 V 32 A 12,35 KW X 720 mm Y 370 mm Z 350 mm ISO 40 Weight 4 tons Vogel central lubrication Grooves 18 mm Speed range 40 - 2000 rpm Feed in all axes Data

x-travel: 400 mmy-travel: 200 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mSK40, xyz 400mm/200mm/400mm, table size 750mm x 300mmspindle speed 40-1600rpm, infeed 8-320mm/minweight ca. 2000kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 970 mmy-travel: 420 mmz-travel: 430 mmControl: Heidenhain TNC 135 number of speeds: 12 speeds: 31,5-1400 U/minfeed range lengthways and crosswise: 8-2000 mm/minfeed range - vertical: 4-1000 mm/minrapid traverse longitudinal and cross: 4 m/minrapid traverse Z-axis: 2 m/minweight of the machine ca.: ca. 3,8 tdimensions: ca. 3050x2350x2320 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Precision Deburring Faceting Milling Machine / Edge Milling Machine Specifications: Steel – stainless steel – aluminium – plastic – machining Deburring and faceting process is carried out with milling cutter Support angle - facet angle tiltable Facet angle adjustment 15 to 45 ° Facet width infinitely adjustable 0 to 7 mm Length of guide strip 500 mm Speed 2750 rpm Drive 400 V / 0.7 kW Space requirement approx. W 650 x D 600 x H 950 mm Weight approx. 30 kg

Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos

x-travel: 1200 mmy-travel: 600 mmz-travel: 600 mmtable-size: 1300 x 600 mmmax. workpiece weight: 2000 kgspindle taper ISO: 50 spindle turning speed - stepless: 30 - 3500 U/minfeeds -stepless-: 1 - 6000 mm/minrapid traverse: 10 m/minpower capacity - milling spindle: 18 kWmax. torque on the spindle: 500 Nmdistance work spindle /surface of the table: 267 - 867 mmdistance table-vertical head: 58 - 658 mmvoltage: 380 V / 50 Hzcontrol voltage: 230 Vtotal power requirement: 22 kWweight of the machine ca.: 6,5 tdimensions: 3,6 x 4,2 x 2,3 mm• CNC control DR. HEIDENHAIN TNC 360,• hydr. tool clamping attachment• electr. handwheel,• vertical head manually tiltable,• coolant device,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deckel, Studer, SAMECA Item 1 CNC 3 axis milling machine Brand: Lid Type: FP 5NC Year of construction: 1986 Condition: Functional Without vice and 3 jaw chucks. Item 2 CNC cylindrical grinding machine Brand: Studer Type: S40-4 Year of construction: 1987 Condition: Functional Item 3 Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional

Hobbing machine Manufacturer: Liebherr Type S600

First commissioned: 2006 Control: Fidia C20 incl. handwheel X-axis: approx. 7,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,751 mm A-axis: + 125° / - 95° C-axis: ± 275° Clamping table Clamping surface: approx. 6,000 x 2,000 x 400 mm Head Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Tool holder: HSK 63A Tool tensioning: hydraulic Drives Linear axes Feed speed X-, Y-, Z-axis: 65 m/min Axle acceleration X-, Y-, Z-axis: 5 m/s2 Connection data Connected load: approx. 150 KW Dimensions, weights Space required Machine with protective cabin Dimensions: approx. 12,200 x 6,300 x 5,800 mm Total weight: approx. 105,000 kg Auxiliary - 20-fold tool changer - Engine room surveillance (camera) Options at extra cost: - Renishaw RMP60 probe - Fidia HMS System Condition of the machine Fully functional, very good condition

NC milling machine, 3 axis, brand cover, type FP 5NC, YOC 1986 Documents are available. The price is net. Without vice and rotary jaw chuck