We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- Automatics (Lathes) For Bars (6)
- Bench Lathes For Precision Mechanics (7)
- Carousel Turning Machines (Lathes) (56)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (37)
- CNC Cycle Turning Machines (43)
- CNC Double Spindel Turning Maschines (Lathes) (16)
- CNC Long Turning Automatics (24)
- CNC Long Turning Machines (21)
- CNC Multiple Spindel Turning Lathes (10)
- CNC Sloping Beds (2)
- CNC Turning Automatics (24)
- CNC Turning Centers (243)
- CNC Turning Machines (572)
- Cutting-Off Machines (9)
- Cycle Lathes (40)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (289)
- Facing Disks (1)
- Facing Lathes (9)
- Facing Lathes With Tailstock (1)
- Feed Automatics (1)
- Heavy Lathes (37)
- High Precision Lathes (9)
- High Precision Turning Machines (Lathes) (8)
- High Speed Lathes (1)
- Hollow Spindle Turning Machines (Lathes) (4)
- Horizontal Turning Centres (1)
- Horizontal Turning Machines (Lathes) (5)
- Longitudinal Turning Machines (Lathes) (4)
- Lunettes (19)
- Multi Spindle Automatics For Bars (27)
- Multi Spindle Chucking Automatics (1)
- Multi-spindle turn automatics (25)
- NC Universal Turning Machines (Lathes) (2)
- Other Turning Machines (17)
- Pointed Turning Automatics (Lathes) (3)
- Ride-Along Lunettes (1)
- Rotating Benches (15)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (8)
- Sloping Bed Turning Machines (Lathes) (1)
- Special Purpose Turning Machines (2)
- Spindle Turning Automatics (Lathes) For Bars (3)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (15)
- Turning Automatics For Bars With Counter-Spindle (1)
- Turning Benches (2)
- Turning Machines (Lathes) (95)
- Turning Machines (Lathes) And Turning Automatics (2)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (4)
- Universal Lathes > 800 Mm Diameter (10)
- Universal Lathes Up To 800 Mm Diameter (7)
- Universal Turning Machines (Lathes) (24)
- Vertical Turning Centres (1)
- Vertical Turning Machines (33)
- Vertikal Turning Machines (Lathes) (37)
- Whirling And Thread Whirling Machines (1)
- more
- abb (3)
- ACCUWAY (4)
- AI HEMBRUG (1)
- AJAX (1)
- ALEX TECH (2)
- ALEX TECH VIPER (1)
- ALZMETALL (1)
- AMADA (1)
- AMUTIO-CAZENEUVE (1)
- Angelini (3)
- ANTONIO ANSELMI (1)
- ARAD (1)
- ARGUS - FLOWSERVE (1)
- AXA (1)
- AYEL-TECH (2)
- BAUER (2)
- BECHLER (1)
- Benzinger (8)
- BERG (1)
- Bernardo (21)
- BERTHIEZ (5)
- BIGLIA (26)
- BISON (1)
- Blansko (2)
- BOEHRINGER (26)
- BOEHRINGER-VDF (1)
- BOLEY (4)
- BRAUN ZERBST (1)
- BREUNING-IRCO (1)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUFFALO CHALLENGER (1)
- BULMAG (1)
- Bulmak (2)
- BÖHRINGER (4)
- CAORLE (1)
- CARNAGHI (1)
- CARNAGHI PIETRO (1)
- CAZENEUVE (29)
- CAZENUEVE (1)
- Celoria (2)
- CERUTI (1)
- CHALLENGER (2)
- Chevalier (2)
- CHIAH CHYUN MUELLER (1)
- Chiron (3)
- CHUN ZU (1)
- CITIZEN (28)
- CKD (1)
- CKD BLANSKO (2)
- CKD-BLANSKO (2)
- CLOVIS (1)
- CMT (4)
- CMT MASCHINENBAU (1)
- CMZ (8)
- Colchester (39)
- COLOMBO (2)
- COMEC (1)
- Contur (2)
- CORMAK (1)
- CRAWFORD SWIFT (2)
- CS (1)
- CZ.TECH (1)
- D (1)
- DAEWOO (8)
- DAEWOO (DOOSAN) (2)
- DAINICHI (1)
- DECKEL MAHO (1)
- DEMOOR (2)
- DIEDESHEIM (1)
- DINN SPINNING LATHE (1)
- DIVERS (1)
- DMG (24)
- DMG GILDEMEISTER (25)
- DMG GILDEMISTER (1)
- DMG MORI (57)
- DMG Mori Seiki (4)
- DMG MORI SEKI (1)
- DMG MORI WASINO (1)
- DMG-GILDEMEISTER (2)
- DMG-MORI (1)
- DMT (1)
- DMT / KERN (1)
- DMTG (1)
- DN SOLUTIONS (6)
- Doerries Scharmann (2)
- DOOSAN (69)
- DOOSAN DAEWOO (5)
- DOOSAN PUMA (2)
- DOOSAN, MIRCRO, ETC. (1)
- DOOSAN-DAEWOO (1)
- DOOSAN-PUMA (1)
- DORMAC (1)
- DORRIES (1)
- DORRIES. (1)
- DS DORRIES SCHARMANN (1)
- DUGARD (1)
- DÖRRIES (12)
- DÖRRIES SCHARMANN (1)
- DÖRRIES-SCHARMANN (2)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 102)
abb 3
ACCUWAY 4
AJAX 1
AMADA 1
Angelini 3
ARAD 1
AXA 1
BAUER 2
BECHLER 1
BERG 1
Bernardo 21
BERTHIEZ 5
BIGLIA 26
BISON 1
Blansko 2
BOEHRINGER 26
BOLEY 4
BULMAG 1
Bulmak 2
CAORLE 1
CARNAGHI 1
CAZENEUVE 29
Celoria 2
CERUTI 1
Chiron 3
CHUN ZU 1
CITIZEN 28
CKD 1
CLOVIS 1
CMT 4
CMZ 8
Colchester 39
COLOMBO 2
COMEC 1
Contur 2
CORMAK 1
CS 1
CZ.TECH 1
D 1
DAEWOO 8
DAINICHI 1
DEMOOR 2
DIVERS 1
DMG 24
DMG MORI 57
DMG-MORI 1
DMT 1
DMTG 1
DOOSAN 69
DORMAC 1
DORRIES 1
DORRIES. 1
DUGARD 1
DÖRRIES 12
EBOSA 2
ECHEA 1
ECOCA 1
EGURO 1
ELMAG 3
EMAG 39
Emco 53
Ergomat 7
ESCO 1
FALCON 1
FAMAR 5
FAMGT 1
FANUC 2
FARREL 1
FAT 3
FEELER 4
Feinbau 3
FMB 5
Forkardt 2
FORMAT 1
FREMTAS 1
FRORIEP 4
GDW 2
GEMA 1
GEMINIS 13
Gildemeister 122
Goodway 6
Graziano 3
GURUPTZE 1
GURUTZPE 8
Guss 2
GWM-TECH 2
HAAS 34
HANKOOK 4
HANWHA 6
HAPREMEC 1
HARDINGE 15
Harrison 6
HBM 9
HEID 1
HERKULES 2
HESSAPP 3
HNK 1
HOESCH 1
HOFFMAN 1
HOFMANN 1
HUNGER 1
HURCO 7
HUVEMA 10
HWACHEON 10
Hyundai 17
ICOCA 1
IEMCA 2
IMT 1
INDEX 84
INNSE 2
IRLE 1
JESSEY 9
JMTCL 1
JOHNFORD 5
JUNG 1
KAMI 5
Kern 4
KERN-DMT 1
KEYENCE 4
KIA 1
Kitagawa 2
KITAMURA 2
KLAASSEN 1
Klaaßen 2
Klopfer 2
KME 1
KMT 1
KNUTH 6
KOLOMNA 9
Kovosvit 4
LABOR 2
LACFER 2
LATHES 1
LEADWELL 5
LEALDE 1
LEIFELD 1
Leinen 3
LIEBER 1
LNS 5
LORCH 1
LÖW 2
M+M 1
MAE 1
MAIER 4
MAMMUT 1
MANURHIN 5
MARTIN 8
MAS 10
MATRA 4
MAYFRAN 1
Mazak 109
MCM 4
MERLI 1
METOSA 1
MEUSER 14
MEXPOL 2
MFD 2
MICROCUT 3
MIOTAL 4
I got it from a collectors engineer which he did't have used it either. It is latest development from Myford, and founding a clean example like this is very difficult, Including high quality Jaws and Tool post as below: 3 jaw chuck, Cam Lock 4 jaw chuck, Cam Lock Dickson Quick Change Tool post, Face plate , Myford Cabinet with doors and key
Machine is in full working order. It runs great and requires nothing. It is supplied with: 3 jaw chuck with both internal and external jaws 4 jaw independent chuck Drill chuck for tailstock Revolving centre for tailstock 56T gear for MOD threads Quick change tool post with 6 tool holders - 4 are standard holders, 1 parting blade holder and 1 is 1MT
200MM" 3 JAW CHUCK FITTED WITH REVERSIBLE JAWS Spindle bore 59mm The Haas control is simple to use and incorporates on screen toolpath verification, The control interfaces well with CAD-CAM ,we will help with setup if required.
Colchester triumph 2500 variable speed for sale. 50” long bed, gap bed, metric, quick change dickson toolpost, 3 jaw chuck, DRO, 6 position carriage stop, rear tool post cross slide. Direct from workshop clearance. Has been tested and seems to run fine in all gears and variable speeds, screw cutting, cross and longitudinal traverse. Moves smoothly along the bed and cross slide .
approved
dealer
dealer
This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of +50 / -50 mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details.
approved
dealer
dealer
This 5-axis MORI SEIKI SL-153 SMC was manufactured in 2000. It features a maximum X-axis travel of 230 mm and Z-axis travel of 520 mm. The machine includes a hydraulic chuck system, chip conveyor, and multiple driven tool holders for enhanced machining capabilities. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-153 SMC horizontal turning machine we have for sale. Contact us for further details.
approved
dealer
dealer
This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It features a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma LB 300M X 500 horizontal turning machine we have for sale. Contact us for further details.
approved
dealer
dealer
lathe, year 2003, CNC Fanuc 16i-TB. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 1999, CNC OSP-U100L. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2016, CNC 31i-B5. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 1998, CNC series 16-T. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2014, CNC 16i-TA. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 1998, CNC MSC-501. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 1998, CNC 16-T. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2006, CNC 21i-TB. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2001. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2010, CNC MSX-701 III (Fanuc 31i-T). Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2006. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2010, CNC 840D ShopTurn. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2001, CNC 21iT. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2013, CNC 18i - TB. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 1998, CNC 21i-T. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2003, CNC Series 18i-T. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2005, CNC 18i-TB. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2006, CNC 21i-TB. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2013, CNC 18 i-T. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2009, CNC 18i - TB. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2004, CNC 18-T. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2013, CNC 840D. Used machine in good condition. More info & price on IndustrialBuyer.
approved
dealer
dealer
lathe, year 2015, CNC M700. Used machine in good condition. More info & price on IndustrialBuyer.
