grinding machines used for sale (2,186)

grinding length: 8400 mmgrinding width: 1450 mmworkpiece height: 1250 mmsurface area: 8000 x 1250 mmtable height over floor: 920 mmdistance between columns: 1470 mmworkpiece weight max.: 59700 kgweight of the machine ca.: 59,7 tdimensions of the machine ca.: 22 x 5 x 5 mAdjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mmAdjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/minTable drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kWThe data for this ad was created wi ...

grinding diameter: max. 320 mmgrinding length: 1.500 mmcentre height: 160 mmControl: Touch Jones & Shipmanbetween centers: max. 100 kgtable:: Traverse Z-Axis: 1.645 mmtraversing speed: 0,0001 - 12 m/minswivable: +5 / -5 °x-axis:: Traverse X-Axis: 260 mmtraversing speed: 0,0001 - 6 m/mingrinding head:: grinding wheel motor: 7,5 kWcutting speed: 45 m/sGrinding wheel Ø x width x bore: 450 x 50 x 203,2 mmTailstock:: Swivel range: -15 / +90 °turning speed range: 0 - 660 U/minTorque: 27 Nmtool adaptor: MK 3 total power requirement: kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 5,5 x 2,5 x 2,0 mpaper band filter: magnetic separator for cooling water: Coolantsystem: Cylindrical Grinding MachineJONES & SHIPMAN - Suprema Easy 1500 E- Replacement grinding wheel flange- Multi-grain diamond (for circumferential and lateral dressing, 10mm, 1 carat)- Tailstock with micro a ...

: 0600 mm: 300 mm: 342 mm: 700x340 mm: 355x38x127 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0800 mm: 400 mm: 342 mm: 900x460 mm: 355x38x127 mm: 2400 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mmgrinding width: 300 mmworkpiece height: 230 mmtable surface area: 1000 x 240 mmx-travel: 1000 mmy-travel: 270 mmz-travel: 350 mmgrinding wheel diameter: 240 mmgrinding spindle speed: 2180 U/mintable speed -stepless-: 3 - 30 m/mintotal power requirement: 4,5 kWweight of the machine ca.: 2,8 tdimensions of machine L x W x H: 2,36 x 1,37 x 2,0 mAccessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mmgrinding width: 250 mmworkpiece height: ca. 385 mmtable surface area: 600 x 200 mmtable speed -stepless-: 2 - 35 m/mintable load capacity: max. 250 kggrinding wheel size: ø 225 x 25 mmgrinding wheel hole diameter: 50,8 mmvertical feed autom.: 0,001 - 0,099 mmrapid traverse vertical: 600 mm/mincross feed of table continual: 10 - 1000 mm/minrapid traverse cross: 1000 mm/mintotal power requirement: 6 kVAdimensions of machine L x W x H: 2,65 x 1,70 x 2,28 mAccessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Other WEISS CNC Tip width [mm] 650 General: Control WEISS CNC Center width 650 mm Center height 200 mm Grinding wheel dimensions 400x60 mm + 500x60 mm Workpiece headstock: Speed 10 -650 rpm Workpiece weight max. 250 (100) kg Grinding diameter max. 390 mm

Michael Deckel S0E Stylus Tool Grinding Machine, SOE Weilheim TOP Condition Total weight approx. 90kg Top grinding wheels with an outer diameter of up to max. 100mm are used Absolute top condition! Only one overhauled machine has a slightly superficial patina the bare metal parts. The pictures speak for themselves. The workshop dream in Reseda green :-) Plug with phase inverter

Graver Grinding Machine Michael Deckel S0, SO Tool Grinding Machine Weilheim Total weight approx. 90kg Top grinding wheels with an outer diameter of up to max. 100mm are used Good used condition. Full function. Including a few common collets. Inclusive a universal socket wrench for changing grinding wheels. 380 volts. Plug with phase inverter

volumn: 3 x 16 Litercontrol: Siemens S7-300 turning speeds: 481 U/mincharge load: 1 kgworkpiece weight: 15 gdimension of workpiece: 30 x 30 max. mmmachining: nass, nass, trocken total power requirement: 400 Vweight of the machine ca.: 300 kgdimensions of the machine ca.: 2,5 x 1 x 1,5 mDisc finishing machine Mulktifinish MF 16/3, year of manufacture 2007We are selling 2 identical disc finishing machines.In the drum of the centrifugal machine, the grinding elements move toroidally under the influence of the activator, while the workpieces are placed freely in the grinding mass and perform complex rotary movements in it during the process.The numerous contacts of the grinding elements with thesurface of the workpieces at high angular speeds lead to deburring, grinding or polishing of the workpieces.https://www.topfinish.eu/wp-content/uploads/Brochure-MF.pdf The data for this ad was created ...

grinding diameter: 355 mmgrinding length: 600 mmweight of the machine ca.: 7,5 tcentre height: mmtotal power requirement: kWdimensions of the machine ca.: mSinumerik 840D sl cnc controltail stockmeasuring devicediamant rollportal loading deviceTechnische Daten / technical details:schleifbarer Durchmesser / grinding diameter 355 mmSchleiflänge / grinding lenght 600 mmSchleifscheibenmaß / grinding wheel dimension 600x80x304 mmReitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 9 kWGewicht der Maschine / weight 7500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height 115 mm Tip distance 500 mm Clamping diameter 250 mm Largest / smallest distance clamping table surface to spindle center 370/70 mm Largest vertical distance between the centre of the grain and the centre of the spindle 255/45 mm Largest horizontal distance from the centre of the spindle to the centre of the grain / the edge of the clamping table 340/385 mm Longitudinal slide path / cross slide path 500/270 mm Perpendicular travel of the carriage beam 300 mm Swivel of the clamping table 90° Swivelling of the grinding head around the vertical axis 360° Tiltability of the grinding head to free angle below and above the center 15..0..15° Adjustability of the grinding head to twist angle right and left direction 60..0..60° Grinding spindle speeds 1100/2200 1/min Power of the drive motor / hydraulic motor 0.9 kW Net weight of the machine 780 kg

grinding diameter: 250 mmgrinding length: 400 mmcentre height: 125 mmControl: Fanuc 21i-T total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine gewartet und teilüberholt.-Neue Schleifspindellagerung-Neue x-Achs Spindel-Obertisch überschliffen-Neue Geometrie Tischgeometrie-Neue Geometrie WSS zu SchleifspindelnB-Achse mit 1° Hirth VerzahnungLängspositionierungHF-InnenschleifspindelGAPPapierbandfilte rThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: mmspeed: m/minBar length: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal cylindrical grinding machine for external and internal grinding with accessories Features: - Automatic grinding cycles - X/Z axes electrically controlled - Table can be swivelled up to 30° - Swivelling grinding head - Short changeover times from external to internal grinding - Easy to use - Compact design Hours: 12936 Weight: 2300Kg Technical data: see picture Further details on request

Various flanges

rotary table dia.: mmmax. dia. of grinding wheel: mmwith manual ongoing: 0manually feed: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 630 mmgrinding length: 600 mmcentre height: 320 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine wird überholt nach Kellenberger Messprotokoll und neu lackiert.Die anfällige Güttinger Steuerung wird durch die zeitgemäße BEMA X Steuerungersetzt. Das heißt die Maschine erhält in diesem zuge auch eine komplett neueElektrik.Siehe Beispielfotos.Maschine mit verstärktem Werkstückspindelstock zumfliegend Schleifen von schweren Werkstücken.Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt.Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 2500 mmgrinding width: . mmworkpiece height: . mmmagnetic plate size: . mmtotal power requirement: . kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 600 mmgrinding length: 2000 mmcentre height: 320 mmworkpiece weight: 1200 kgworkpiece weight in steadies max.: 5000 kggrinding wheel size: 760 x 304,8 x 75 mmgrinding wheel turining speeds: 500 - 1400 U/minturning speed range - workpiece: 5 - 150 U/minmain drive motor: 22 kWworkpiece drive: 12 kWControl: Fanuc 0i Mate-MD total power requirement: 42 kWweight of the machine ca.: ca 10 tdimensions of the machine ca.: 11 x 2,9 x 1,8 mequipped with:- CNC control FANUC Series 0i Mate-MD- tailstock- 5 closed steady rests- 4 support blocks- Splash guard doors- CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 300 mmgrinding length: 600 mmworkpiece weight: 80 kggrinding wheel diameter: 508 mmControl: Siemens type: 840 C grinding spindle speed: 45 m/spower capacity - grinding motor: 7,5 kWz-axis: 865 mmx-axis: 250 mmcentre distance: 1000 mmnumber of turns of spindle head: 1-800 U/mintotal power requirement: KVAweight of the machine ca.: 4,85 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mmgrinding width: 400 mmworkpiece height: 400 mmmagnetic plate size: 1000x400 mmtotal power requirement: . kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 480 mmgrinding length: 2250 mmcentre height: 370 mmthroat: 900 mmlength of gap: 400 mmbed width: 480 mmturning speeds: 14-1000 U/minspindle passage: 85 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 2500 mmgrinding width: 600 mmworkpiece height: 800 mmTable dimensions: 2500x600 mmvertical movement: 800 mmthroat: 650 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStepless automatic feed for table 3-40 m/minReturn feed for tableFilter attachmentHydraulic unitCoolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. dia. of grinding wheel: 175 mmboring diameter: 32 mmmax. width of grinding wheel: 25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1500 mmgear width: 550 mmmax. module: 25 min. module: 2 workpiece weight max.: 6000 kgmax. number of teeth: 432 min. number of teeth: 12 table diameter: 990 mmgrinding wheel size: 400 mmtotal power requirement: 75 kWweight of the machine ca.: 20,5 tdimensions of the machine ca.: mWith tailstock max. wheel dia. 1250mm, without tailstock 1500mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 800 mmgrinding length: 4000 mmControl: SIEMENS Simatic OP3 grinding wheel diameter: 800 mmspindle speeds: 0 - 70 mmvoltage: 400 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: mmgrinding length: mmcentre height: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 660 mmgrinding length: 2000 mmworkpiece weight: 1500 kggrinding wheel diameter: 400 mmcontrol: X-As. Diatos 602 total power requirement: 12/22/30 kWweight of the machine ca.: tdimensions of the machine ca.: mIncluding:With Diamant Wheel / Plunge GrindingWith Spark out / Face GrindingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 12-60 mmspeed: 60/120 m/minBar length: 4000 mmFeed: 0-5 mm/Urolling power: 500-40000 Nweight: 1200 kgtotal power requirement: 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.