grinding machines used for sale (2,541)

table with one T-slot as well as a magnetic clamping plate with the plate dimensions: 400 x 200 mm

Maschinennummer: 831285, Schleifscheibendurchmesser: ca. 160 mm

Additional technical specifications:• Wheel dimensions: 200/25/51 mm• Operating voltage: 220/380 V

METABO Double Bench GrinderManufacturerMETABOConditionuntestedLocation63843 Niedernberg DELot61

The machine is equipped with a cooling water system and a band filter system.Attention: the machine can be transported on a standard low-loader trailer!Additional technical specifications: • Control voltage: 220 V • Rated current: 204 A • Grinding wheel diameter: approx. 800 - 900 mm • Magnet dimensions: 2000 x 700 x 100 mm • Table: with three slots

Maschinennummer: 6141, Betriebsspannung: 220/380 V, Frequenz: 50 Hz, Drehzahl: 2000 U/min, Schleifscheibendurchmesser: 150 mm, Schleifscheibenbreite: 25 mm

Additional technical specifications:• operating voltage: 220/380 V• rated current: 2.3/1.35 A• wheel dimensions: 200/25/51 mm

SUNDER ROTOMAX 1,5 Flexible Shaft GrinderManufacturerSUNDERModelROTOMAX 1,5Year2006ConditionuntestedLocation35614 Aßlar DELot83

Maschinennummer: 9990, Schleifscheibendurchmesser: ca. 200 mm, Magnetabmessungen: 260 x 150 mm

ASSFALG ASM-125/S Drill GrinderManufacturerASSFALGModelASM-125/SYear1987ConditionuntestedLocat ion72589 Westerheim DELot164

grinding diameter: 350 mmgrinding length: 660 mmmax. module: 25 min. module: 0,5 Control: CNC total power requirement: 30 kWweight of the machine ca.: 8,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Belt Sanding MachineConditionuntestedLocation63843 Niedernberg DELot51

Grinding diameter: 600mm, grinding height: 400mm, max. table load: 500kg, length: 2540mm, width: 2130mm, height: 2350mm, weight: 5.2t, with manual, installation instructions and operating instructions, special face grinding program, 1x standard grinding wheel holder 25-100mm for wheel bore Ø127, tools (1x open-end wrench, 1x removal screw). An on-site inspection is possible.

Weight: 4.7t, automatic system operating hours: 41,411h, feed operating hours: 14,251h, an on-site inspection is possible.

Max. saw blade diameter: 800mm, feed speeds: 3, max. feed 80teeth/min, motors: 2. With dressing device and coolant system. All motor cables and switch connectors were replaced. The machine was completely dismantled, cleaned and workshop-overhauled. Documentation available. Inspection possible by appointment.

Surface Grinding Machine Elb Star 2 M BJ 1997

This 3-axis KNUTH HFS 30638 C surface grinding machine was manufactured in 2015. It has a weight of 1,960 kg and has operated for approximately 9,200 hours. If you are looking to get high-quality grinding capabilities, consider the KNUTH HFS 30638 C machine we have for sale. Contact us for further details.

JUNKER JUPITER 500 – CNC Cylindrical Grinding Machine Plunge-Cut MethodTechnical Data:Workpiece diameter: 2–220 mmWorkpiece length: max. 500 mmCorundum grinding wheel: 610 × 500 × 305 mmCBN grinding wheel: 500 × 500 × 305 mmSpindle drive: 37 kWRegulating wheel: 350 × 500 × 203 mmRegulating wheel speed: 1–800 rpmRegulating wheel drive: 11.5 kWPower: 81 kVA

Used CNC Internal Cylindrical Grinding Machine Danobat Overbeck ID-400 Year of construction 2021 Siemens 840D SL CNC control Center height / factory specification: 230 mm Actual measured tip height: 270 mm Internal grinding diameter 200 mm Grinding length 200 mm Max. workpiece length including clamping system 400 mm X-axis stroke 425 mm Resolution min. 0.0001 mm Feed speed 1 ~ 25,000 mm/min Linear motor Z-axis stroke 475 mm Resolution min. 0.0001 mm Feed speed 1 ~ 25,000 mm/min Linear motor Workpiece weight including chuck max. 500 kg HVX high-frequency grinding spindle, 7 kW, 75,000 rpm PREPARED for HVX high-frequency grinding spindle, 3 kW, 90,000 rpm Machine bed made of natural granite Cooling unit for cooling the linear motor drives, torque motors, spindles and the electrical control cabinet. Cooling lubricant Complete machin ...

Manufacturer under license: Feinmechanik GmbH Dewozzpmtsvu Nu Iekt incl. stand with collets (see picture)

Double bench grinder original GREIF incl. stand incl. CEE plug Power: 0.55 kW Speed: 3,000 1/min Grinding wheel diameter: 200 mm

Surface Grinding Machine Blohm

Double bench grinder original GREIF incl. stand Speed (min.): 3,000 rpm Grinding wheel diameter: 200 mm incl. CEE plug Power: 0.55 kW

L & Z lathe WEILER CONDOR B incl. three-axis digital display -CE - Identifier -Machine from educational institution / very well maintained -Tip height 165mm -Circumferential diameter over bed 330mm -Circumferential diameter over face slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm - Automatic / longitudinal & face feeds -Thread/Metric/Inch etc. -Rod passage 40mm -Tailstock / quill holder MK 3 -Multifix base holder & inserts -Three-jaw end-ender 200mm -Electric lining protection -Spindle protection cover - 2x Emergency / Off -Coolant device -Swarf back wall -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 1200Kg

Universal tool grinder DECKEL S 11 with accessories & tool cabinet -Grinding stroke 190mm -Grinding stroke for twist grinding 190mm -Longitudinal adjustment grinding spindle approx. 5mm -Vertical adjustment grinding head approx. 320mm -Transverse adjustment tool carriage approx. 100mm -Adjustment ranges: -Grinding head carrier approx. 800mm -Tool carrier approx. 215mm -Universal / part head approx. 330mm -Swivel angle / grinding head carrier 360 degrees / grinding head 360 degrees / tool carrier 360 degrees -Clamping surface tool carriage approx. 500x180mm -Max workpiece diameter between the tips 130mm -Max. workpiece diameter / flying clamping (universal parting head) 620mm -Digital display -Measuring optics -Other accessories ( SEE PICTURES) -Documentation -Tool cabinet

ABA-WERK Aschaffenburg Hand Lever - Surface Grinding Machine FFK -Total power: 1.75 kW -Magnetic clamping plate: approx. 300 × 150 mm -Working range: approx. 350 × 300 × 150 mm -Grinding length: approx. 350 mm -Grinding width: approx. 150 mm -Max. workpiece height: approx. 150 mm -Grinding wheel dimensions: approx. Ø 200 × 20 × 76 mm -Grinding spindle speed: approx. 2,800 rpm -Table adjustment longitudinal: manual -Table adjustment transverse: manual -Height adjustment: manual -Magnetic Clamping Plate: Permanent Magnet -Machine feet -Grinding wheel protection -Extraction system Dimensions: LxWxH 1.1x1.1x1.7 meters / Weight 700Kg

Chips - Centrifuge STEIMEL POLAR / S 5 - Drum diameter (basket) 500mm -Speed / power 1000 rpm adjustable up to max. 1400 rpm -Incl. documentation & electrical plan Dimensions: LxWxH 0.7x0.7x1.2 meters / Weight approx. 250Kg

Tip height: 100 mm Center width: 500 mm Grinding wheel diameter: 300 mm Max. speed grinding wheel 2,825 min-1 Rotatable grinding head 90° left and right Max. workpiece speed: 750 min-1 Spindle cone MK 4 Tailstock 3-jaw abrasive chuck 125 mm Face Plate 160 mm Collet chuck ER 40 with collet set 28 pcs. Fixed grain tip Grinding wheel flange with grinding wheel Wet grinding equipment

A Studer CNC universal cylindrical grinding machine in need of repair is offered. Mains voltage/frequency: 380V/50Hz, control: Siemens SINUMERIK System 3, drive system: Siemens SIMODRIVE, measuring system: Marposs E5. Including various accessories. Documentation available. An on-site inspection is possible.

Surface grinding machine manufactured in 2016. This OKAMOTO ACC 52 SA features a grinding length of 500 mm and a grinding width of 200 mm, with a maximum table load of 200 kg. The hydraulic table feed rate reaches up to 27 m/min, and the spindle speed can go up to 3,500 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 52 SA machine we have for sale. Contact us for further details.