Flat Grinding Machines used for sale (156)

Precision flat grinding machine Manufacturer: COSMOS Model: Earth 1050 NC Built: New factory Grinding length: 1000 mm Grinding width: 500 mm Grinding height: 400 mm Electric magnetic release plate 1000 x 500 mm Single fitters at the table firmly assembled for straight judting with compensation Programble display 4.7 " Unseated grinding spindle drive Universal paper tape filter

: neu : 050233 : Jänner 2027, Zwischenverk : Taiwan : 87870 €: 1660.74 €: 1015 mm: 600 mm: 1000 x 400 mm: 1000 x 400 mm: 670 kg: 1100 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 450 mm: 440 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 2.000 1/min: 5,5 kW: 1.5 kW: 1.1 kW: 1.1 kW: 3630 mm: 2682 mm: 2200 mm: 4400 x 2300 x 2400 mm: 4800 kg: 423 kg: 670 kg: 355 x 50 x 127 mm10,4", grafic NC-control on swiveling arm with touch screen for:- seletion of working mode, program creation, graphic condition control, alarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatoroil mist collectorautom. dressing attachment table mounted with compensationfully enclosed splash guard protection of working area1 grinding wheel2 grindi ...

Surface Grinding Machine Geibel & Hotz FS 840 BJ 2008

: neu : ca. 6 Monate ab Auftragse : Taiwan : 83670 €: 1581.36 €: 810 mm: 610 mm: 800 x 400 mm: 800 x 400 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 450 mm: 0 - 675 mm/min: 480 mm: 500 - 2200 1/min: 3,75 (optional 5,5 / 7,5) kW: 1.5 kW: 3250 mm: 3075 mm: 2250 mm: 2900 kg: 175 kg: 350 kg: 355 x 50 x 127 mm: 1,1 kWFully enclosed splash guard10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listautomatic vertical feedservo drive for grinding wheel feed and table cross feedheavy duty spindle with 2 sets (4) of class P4 super precision angular contact ball bearingshardened and gr ...

Key data: 2000 mm, 1000 mm

max. grinding length 2000 mm max. sanding width 1000 mm max. working height for new disc 600 mm max. workpiece weight 3200 kg max. table load 4500 kg Clamping area 2860 x 1000 mm Grinding spindle drive 26 KW Spindle speeds 1000 - 3000 1/min Transverse movement feed 1 - 5000 mm/min Vertical feed rate 1 - 5000 mm/min Minimum programming value 0.001 Recooling unit Mechanical suction Paper Belt Filter Machine Grinding wheel balancing electronics Pneumatic folding dresser Control ABAMATIC 1 N.D.

Table size: 600 x 250 mm Travels: X= 660, Y= 360, Z=280 mm Grinding wheel size: 300 x 50 mm 2025 new power section

Degen FSM 300 Surface Grinding Machine High-quality precision surface grinding machine from the German quality manufacturer Willy Degen, model FSM 300. The machine is characterized by its compact design and extreme precision in tool and mold making. It is ideal for workshops with limited space that do not want to compromise on accuracy. Extensive accessories & highlights including: Digital position display (DRO): For precise work and error-free delivery. Original Suction & Wet Grinding Unit: Ready to connect directly for clean work and optimal workpiece cooling. Magnetic Clamping Plate: Already assembled for immediate starting. Technical data (according to nameplate): Manufacturer: Willy Degen (Schömberg) Type: FSM 300 Machine No.: 1309 Year of Make: 2000 Connection: 400 V / 50 Hz (high current) Power: 2.7 kVA / 5.6 A Control voltage: 24 V sec. "Everything f ...

Key data: 700 mm, 350 mm

A Blohm Simplex 7 surface grinder is being sold. Grinding length: 700 mm Grinding width: 350 mm Table clamping surface: 1,100 x 300 mm Self-dismantling and self-collection. Price is net plus VAT All information without guarantee

CNC Surface Grinding Machine LGB R12070 Year of Make: 2005 Internal machine no. 65 Grinding width: 600 mm Grinding length: 1,200 mm X-axis: 1,320 mm Y-axis: 480 mm Z-axis: 730 mm Grinding height above table max.: 520 mm Accessories: Belt filter system Magnetic plate approx. 1,000 x 500 mm

CNC Surface Grinding Machine LGB R12070 Year of Make: 2005 Internal machine no. 65 Grinding width: 600 mm Grinding length: 1,200 mm X-axis: 1,320 mm Y-axis: 480 mm Z-axis: 730 mm Grinding height above table max.: 520 mm Accessories: Belt filter system Magnetic plate approx. 1,000 x 500 mm

Key data: 600 mm, 300 mm

Wagner FSG1224ADIII Grinding path 600 x 300 Magnetic clamping plate 600 x 300 Travel 650mm Travel manual 700mm Grinding removal 99,999mm Drive power 3.7 Kw Touch panel 8" TFT Compensation Training Adjustable adhesive force Automatic Nonwoven Roll Filter Stepless speed control 750 – 2100

Key data: 1500 mm, 600 mm

Surface Grinding Machine - Horizontal ELB-SCHLIFF Perfect BD 15 SPS Used machine as good as new Machine was completely rebuilt Control cabinet new, motors new, wiring new, control system new Hydraulics new, fairing new, Grinding length: 1500 mm Grinding width: 600 mm Workpiece height: 600 mm Table clamping surface: 1500 x 600 mm Grinding wheel dimensions: 400x100x127 mm Grinding spindle motor: 11 kW Table speed: 2 - 30 m/min Grinding wheel speed: 5 -35m/sn Total power requirement: 25 kW Machine weight approx.: 5.6 t Approx. space requirement: 4.2 x 2.5 x 2.5 m General overhauled in 2026 with 12 months warranty Paper filter machine Oil cooler Adjustable feet Line-up included Instruction included

Surface Grinding Machine MONOPRECIS 1DR - #2 Travel X: 400 mm Travel Y: 150 mm Maxi grinding height (Z): 220 mm Year of construction: 1986 Axes X - Y - Z manual Magnetic chuck: manual / tilted Magnetic chuck dimensions: 255 x 130 mm Grinding wheel dimensions: Ø max 170 mm Voltage: 380 V Dimensions (L x W x H): 1300 x 1100 x 1600 mm Weight: approx 500 kg

Key data: 500 mm, 200 mm

Surface grinding machine Jung (built in 1949) for sale For sale is a Jung surface grinder, built in 1949, in age-appropriate condition. The machine is functional and can be viewed and tested on site. Technical data: Magnetic table: approx. 500 x 200 mm Year of Make: 1949 Condition: used, age-appropriate, functional The machine is ideal for use in the commercial sector or for lovers of classic machine tools. Sale only to tradespeople. Viewing possible by arrangement.

Key data: 600 mm, 200 mm

Magnet Nalex Type: 20/60 Plug 32 A Length 1.4 m Width 2 m Height 1.8 m Weight 2.8 t

Key data: 600 mm, 250 mm

Surface Grinding Machine Jung JF520 +Supromatic Built in 1979 The machine was completely overhauled in 1999 Grinding length: 600 mm Grinding width: 250 mm Operating hours: 15000 h Good condition

Cup wheel Ø: 175 mm Table clamping surface: 150 x 250 mm large installation height without/with magnetic plate: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Drive motor: 380 V, 1.5 kW Approx. space requirement: 800 x 600 x 1600 mm Weight approx.: 200 kg

Inv. Num. : 6614 Type: - Producer: JUNG Generated: Parameters: Equipment: DRO In good technical condition.

Largest grinding length 1200 mm Longest grinding length with table dresser 1000 mm Largest grinding width 600 mm Grinding height (table bottom edge grinding wheel) 550 mm Table load with magnetic pallet 975 kg Table load without magnetic plate 1200 kg Table speed 1 - 40 m/min Grinding spindle Motor spindle 11 KW Grinding wheel 406 x 152.4 x 100 mm Speed 1400 rpm Longitudinal axis (z-axis) Rapid traverse 5 m/min Adjustable feed rate 1 - 50 mm Infinitely adjustable feed 0 - 2000 mm/min smallest infeed 0.001 mm Perpendicular axis (y-axis) Rapid traverse 1.5 m/min smallest infeed 0.001 mm Space requirement approx. 4450 x 2935 x 2540 mm Total weight approx. 6700 kg Equipment: - Electropermanent magnetic clamping plate 1000 x 500 mm incl. electron. Control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l  ...

Key data: 400 mm, 150 mm

Year of manufacture 1983 Grinding length 400 mm Grinding width 150 mm Installation height 400 mm Table load 75 kg All feeds are infinitely variable Drive power 1.5 kw Automatic delivery Magnetic Plate 400 x 150 mm Puller Wet grinding device Machine is in good condition

Surface Grinding Machine Aba FFK High-quality, hand-operated surface grinding machine Magnet size: 250 x 150 mm Dressing device on top of the spindle Maximum stroke in X direction: 390 mm Maximum stroke in Y-direction 180mm Height from magnet to spindle center: 395 mm Large Vernier Rings Includes 5 flanges with grinding wheels Dot diamond for magnet A dust extraction system is also available.

Grinding length: 600 mm Grinding width: 200 mm Clamping surface of the table: 600 x 200 mm Greatest distance between table and grinding spindle center: 500 mm Grinding wheel dimensions: 250 x 25 x 51 mm Table longitudinal feed hydraulically infinitely variable: 1 - 24 m/min Table transverse feed per hand rotation: 4 mm Grinding spindle speed infinitely variable via DC drive: 800 - 4200 rpm DC drive: 1.5 - 5.0 kW Net weight with control cabinet approx.: 2000 kg Approx. space requirement: 3100 x 1700 x 1900 mm

Inv. Num. : 4518 Type: JA 500 A Producer: JUNG Created: 1994 Parameters: Control system: Siemens Operating hours: 10662 h Maximum grinding height of the workpiece: 375 mm Maximum spindle speed: 4200 1/min Minimum travel speed longitudinally (X-axis): 24 m/min Maximum travel speed longitudinally (X-axis): 24 m/min Grinding wheel diameter new: 250 mm Spindle power: 7.5 kW Maximum grinding length without grinding wheel extension (X-axis): 600 mm Maximum sanding length: 200 mm Machine height: 1000 mm Machine length: 3700 mm Machine width: 2100 mm Machine weight: 2,500 kg

Key data: 600 mm, 375 mm

ELB Optimal 6375 SPS, year of construction 1995, grinding area 600 x 375 mm, the machine has been overhauled by us currently, the guide tracks are scraped in tolerance of a new machine, the bearings of the grinding spindle have been changed, accessories: Electric Perm magnetic clamping plate 600 x 350 mm, automatic straight dresser for the grinding wheel mounted on spindle box, with dressing compensation, coolant tank with paper belt filter. The machine is functionally tested and can be viewed at our premises under power, we are also happy to take over the installation and training on site, as well as the service in the future

Subject to prior sale - errors possible Internal reference number: D-1143-6

Key data: 400 mm, 200 mm

Ziersch & Baltrusch FS 2040 - Surface Grinding Machine - Magnetic clamping plate 400 x 175 mm -Hydraulic - Coolant device -Bandpass filter - Automatic transverse stroke not functional - Year of construction 1988 Specifications - Grinding area: 400 x 200 mm - Height adjustment: 410 mm - Magnetic table: 400 x 175 mm - Grinding wheels: 200 x 25 x 51 mm - Grinding wheel speed: 1420 / 2840 rpm - Motor power: 1.5 kW - Dimensions WxHxD: 1700 x 2100 x 1500 mm - Weight: approx. 1100 kg

Key data: 600 mm, 350 mm

G+H (Geibel + Hotz), FS 635 SA Built in 1997 Grinding area 600x350 Weight: approx. 2,600 kg