grinding machines used for sale (2,186)

sanding belt measurements: 150x2000 mm: 1400/2800 U/minband speed: 16,5 / 33 m/stotal power requirement: 3,4/4,5 kWweight: 190 kgMaximum grinding of pipes is possible:at 90 degrees max. 150 mm Øat 60 degrees max. 127 mm Øat 45 degrees max. 100 mm Øat 30 degrees max. 70 mm ØThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: 135 liter: 1220 mmtank diameter / tank height: 1.220 / 1035 mm: 304 mmmotor capacity: 0,75 kWmotor speeds:: 1500 U/minvoltage: 400 Vweight of the machine ca.: 600 kgdimensions of the machine ca.: 1,38 x 1,28 x 1,04 mDryer- Serial-No.: 15772 / 96-08- Machine ON: 44.854 h- Heat unitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: 620 Liter: 1.700 mmtank diameter / tank height: 1.550 / 600 mm: 450 mmmotor capacity: 4,5 / 7,5 kWmotor speeds:: 900 / 1.485 U/minvoltage: 400 Vtotal power requirement: 8,5 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2,00 x 1,70 x 1,50 mSoundproofing cover bracket: 3,30 x 0,60 x 0,40 mFinishing machine- Serial-No.: 36225 / 05- Machine ON: 6.469 h- Pneumatic separating flap- Timer- Pneumatic soundproof coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Volume of work tank 200 l Usable volume 125 l Max. workpiece (diagonal) 170 mm Screening area 2190 cm² max. centrifugal force 49,000 N There are 2 lifts available!

grinding length: 500 mmgrinding width: 200 mmworkpiece height: 290 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMachine from the German Federal Institute of Physics and Metrology- geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced- colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdownManual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kgWarranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at  ...

wheel diameter: 150 - 500 mmtotal power requirement: 3 kWweight of the machine ca.: 350 kgdimensions of the machine ca.: 2,4 0,6 1,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: 260 liter: 1.300 mmtank diameter / tank height: 1.150 / 500 mm: 300 mmmotor capacity: 1,5 / 3,0 kWmotor speeds:: 985 / 1.480 U/minvoltage: 400 Vweight of the machine ca.: 740 kgdimensions of the machine ca.: 1,50 x 1,30 x 1,25 mFinishing machine- Serial-No.: 15770 / 96-08- Machine ON: 37.851 h- TimerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of Make: 1976 Last overhaul of mechanics: 1988 Last electrical overhaul: 2011

internal diameter: 800 mmgrinding depth: 500 mmswing diameter: 850 mmtotal power requirement: kWweight of the machine ca.: 6,4 tdimensions of the machine ca.: mUsed internal cylindrical grinding machine with face grinding devicein special design with enlarged swing diameterand extended, hydraulic transverse movementReconstructed and modernized 1995 in the Glauchau manufacturer’s plant,put into operation 19961. TECHNICAL DATA1.1 Working areaGrinding diameter in the workpiece guardinternal grinding, min./max. mm 30/630(800)External grinding, max. mm 800Grinding depth, up to approx. mm 500Table stroke mm 800Workpiece diameter, max. mm 800Swing diameterin workpiece protection, max. mm 800Without workpiece protection, approx. mm 850Distance from workpiece spindle headto grinding spindle carrier, max. mm 1225Adjustment of the internal grinding deviceon the table, max. mm 5451.2 Workpiece h ...

honing diameter: 9999999 mmstroke: 9999999 mmthroat: 9999999 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed without warrantyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 9999999 mmstroke: 9999999 mmthroat: 9999999 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed Treiber from a Nagel MSU2 controlNo warrantyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 9999999 mmstroke: 9999999 mmthroat: 9999999 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed panel of a NAGEL MSU2No warrantyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 1524 mmgrinding length: 8000 mmswing diameter: mmcentre distance: 8500 mmcontrol: Fanuc 18i-TB working spindle drive: 30 kWwork piece spindle speed: 7-42 U/mingrinding wheel size: - mmgrinding diameter - min.: - mmgrinding motor: 38 kWgrinding wheel speeds: 450 - 1250 U/mintotal power requirement: ca 75 kWweight of the machine ca.: - tdimensions of the machine ca.: - mmodernized in 2024equipped with- CNC Control FANUC 18i-TB- Ball screw type - Tailstock- coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 2000 mmgrinding width: 600 mmworkpiece height: mmControl: total power requirement: 17 kWweight of the machine ca.: 10 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: . mmmax. dia. of grinding wheel: 300 mmwith manual ongoing: . 0manually feed: . 01,5 KWThe technical Data are manufacturer or operator information andtherefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: . mmmax. dia. of grinding wheel: 300 mmwith manual ongoing: . 0manually feed: . 01,5 KWThe technical Data are manufacturer or operator information andtherefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: . mmmax. dia. of grinding wheel: 260 mmwith manual ongoing: . 0manually feed: . 00,73 KWThe technical Data are manufacturer or operator information andtherefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: 150 liter: 1.000 mmtank diameter / tank height: 920 / 480 mm: 210 mmvoltage: 380 Vweight of the machine ca.: 630 kgdimensions of the machine ca.: 1,10 x 1,50 x 1,30 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER)  Grinding wheel diameter: 750 mm  grinding width max. - throughfeed grinding: 180 mm  material thickness max. - throughfeed grindin: 30 mm  grinding width max. - plunge cut grinding: 300 mm  material thickness - plunge cut grinding: 80 mmGRINDING SPINDLE 1  drive power: 48 kWGRINDING SPINDLE 2  drive power: 48 kWCOMPONENT-FEEDER  Feeder Design: rotary Feeder   feeder velocity max.: 20 mm/min  feeder velocity min.: 240 mm/minDIMENSIONS / WEIGHTS  space requirements -left/right-: 4900 mm  space requirements -front/back-: 5000 mm  total height: 3100 mm  total weight approx.: 13000 kgwith inline measuring system DISKUS IONIC 17AEmulsion treatment system HÜTTNER F6-157 ...

CONTROLS  CNC controls SIEMENS 810 T WORKING RANGE (DOUBLE DISC GRINDER)  Grinding wheel diameter: 750 mm  grinding width max. - throughfeed grinding: 180 mm  material thickness max. - throughfeed grindin: 30 mm  grinding width max. - plunge cut grinding: 180 mm  material thickness - plunge cut grinding: 30 mmCOMPONENT-FEEDER  Feeder Design: rotary Feeder ELECTRICAL SPECIFICATIONS  total power consumption: 95 kWScope of delivery:- Machine- div. flanges and used grinding wheels- Measuring control IONIC 17AOptional:- 270 pcs. grinding segments 22A 100 S 6 B20- 289 pieces grinding segments 14C 80 L 10 B30Machine is dismantled and stored

dayligth: 420 mmMagnetic field: 420x200 mmgrinding length: . mmweight of the machine ca.: tdimensions of the machine ca.: mStepless automatic feed for table 3-40 m/minReturn feed for tableFilter attachmentHydraulic unitCoolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mmgrinding length: 1000 mmcentre height: 125,175,225 mmgrinding wheel diameter: 400 mmgrinding wheel width: 50 mmbore: 127 mm: MK5 work piece spindle speed: 20-400 U/minworkpiece spindle - bore: mmgrinding head swivelling: 360 °grinding spindle head - swivable: 180 + - °grinding spindle speed: 1500,1700,2200 U/min: 0,001-0,030 mm/Ø: 0-0,95 mm/Ø: ±8 °longitudinal feed of the table: 1300 mmtable speeds: 0,02-6 m/min: 130 kg: 130 inkl. Spannugkg kg: mmgrinding depth: mm: 70 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 4,2 x 2,0 mReady for delivery, with 12 month warranty in germany and neighbouring countries!Geometrically overhauled and repainted with new electrics.In KELLENBERGER quality!-Digital display in 2 axes. Resolution x-axis 0.5my-Modern workpiece headstock with cone MK5-Modern tailstock with ...

Specifications: Manufacturer: Hans Sielemann Type: RB 100 Year of Make: 1971 Workspace Workpiece weight: max. 400 kg Workpiece dimensions : max. 1,200 x 650 mm Bore diameter: 1,000 x 400 x 350 mm Outer diameter: max. 850 mm Roundtable Speed infinitely adjustable: 5-50 rpm T-slots: 16 mm Internal grinding headstock Drive power: 7.5 kW Speed : 2,930 rpm Grinding spindle speed : 1,610 rpm Sleeve diameter: 140 mm Sleeve length: 500 mm Core projection: 270 mm Grinding wheel diameter: max. 300 mm Grinding wheel bore: 76 mm Grinding wheel width: 60 mm Bore diameter: 76 mm Drive Voltage: 380 V Type of current: 50 Hz Dimensions and weight Dimensions: 4,700 mm x 2,900 mm x 3,300 mm Weight: 9,500 kg Condition Condition: Used Functional: Tested and fully functional

Travel paths X/Y/Z: 900 x 400 x 200 mm Table size 800 x 400 mm

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Sell some machines from our warehouse because we need the space to expand

grinding diameter: 630 mmgrinding length: 600 mmcentre height: 320 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMachine with heavy duty workhead.Machine will be partial overhauled before delivery.Machine will get a geometry protocoll according to the Kellenberger new machine guidelineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel Ø: 300 mm Grinding wheel width: 50 mm Grinding wheel speed: 1400 rpm Grinding wheel drive: 380 V, 1.5 kW Space requirement: 1050 x 580 x 1200 mm Weight approx.: 140 kg

grinding length: 600 mmgrinding width: 300 mmworkpiece height: 350 mmtotal power requirement: ? kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,522 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 180 mmControl: Fanuc 180-T grinding wheel width: 80 (100) mmgrinding wheel diameter: 450 mmpower capacity - grinding motor: 7,5 kWtable speed -stepless-: 10 m/mingrinding spindle head - swivable: +5 / -180 °turning speed range - workpiece spindle: 10 - 800 U/mingrinding head swivelling: 0 - 15 °workpiece weight max.: 120 kgtaper in tailstock-quill: MK 4 tailstock quill stroke: 35 mmdressing device: voltage: 400 Vtotal power requirement: 18 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 3,75 x 2,25 x 1,80 mband filter unit: 1,75 x 1,20 x 0,80 m- Serial No.6769- Universal Cylindrical Grinding Machine with internal grinding spindle- CNC-controlled B-Axis for automatic. swivel of spindle headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.