grinding machines used for sale (2,179)

workpiece diameter:5-125 mmgrinding depth:50-1000 mmclamping length:1000 mmtotal power requirement:1.9 KVAweight of the machine ca.:630 kgmax. workpiece weight:100 kgCenter Hole Grinding Machine.Workpiece must be rotated by machine during grinding

grinding length:600 mmgrinding width:300 mmworkpiece height:450 mmtotal power requirement:8 kWweight of the machine ca.:2,2 tdimensions of the machine ca.:2,8 x 3,0 x 2,0 mgrinding spindle speed:1440 / 2905 U/minwith magnetic plate 600 x 200 mmautom. vertical feed coolant attachmentTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

grinding length:450 mmgrinding width:250 mmworkpiece height:280 mmTable area:760 x 250 mmgrinding spindle drive:2,5 kWgrinding wheel dia. x width:250x 25 mmgrinding spindle speed:1430/2900 U/minway of grinding spindle saddle, vertical:400 mmtotal power requirement:4,5 kWweight of the machine ca.:1,8 tdimensions of the machine ca.:1,8 x 1,4 x 2,0 mMachine equiped with magnetic plate- dresser

grinding length:450 mmgrinding width:250 mmworkpiece height:280 mmTable area:760 x 250 mmgrinding spindle drive:2,5 kWgrinding wheel dia. x width:250x 25 mmgrinding spindle speed:1430/2900 U/minway of grinding spindle saddle, vertical:400 mmtotal power requirement:4,5 kWweight of the machine ca.:1,8 tdimensions of the machine ca.:1,8 x 1,4 x 2,0 mMachine equiped with magnetic plate- dresser

grinding diameter:380 mmgrinding length:1000 mmcentre height:180 mmgrinding wheel diameter:400 mmmax. workpiece weight between centres:250 kgtotal power requirement:10 kWweight of the machine ca.:4,1 tdimensions of the machine ca.:3 x 2 x 1,6 mwith internal grinding attachmentwith fixed and swivelling headstockwith coolant tank

Equipped with: Husqvarna K3600 Mark II (2013) is a hydraulic ring grinder with approx. 4.3 kW output, blade Ø 350–370 mm, maximum cutting depth ±270 mm and working pressure up to 150 bar (oil flow ±35–40 l/min) with additional new grinding blade. Hycon HPP18 (±2009) is a hydraulic power pack with a petrol engine of approx. 18 hp (±13 kW), an adjustable oil flow rate of approx. 20–40 l/min and working pressure up to ±120–160 bar for driving concrete sawing and drilling equipment, with 20 Auction-ID: A1-41988-104

honing diameter:51 mmstroke:300 mmspindle speeds::600 - 3000 U/minfeed range:1500 - 5000 mm/minspindle drive:1,1 kWweight of the machine ca.:0,8 ttotal power requirement:4 kWdimensions of the machine ca.:1,1 x 1,9 x 1,5 m

Product: ROLLER'S Rondo 8–35 deburring machine (8–35 mm) The model is an inner and outer tube deburring for: Stainless steel pipes, steel pipes Copper, Brass Aluminium Plastic pipes Technical data: Tube diameter: 8–35 mm Material: Metal housing/hardened cutting edges Weight approx. 220 g Features: Many specially hardened cutting edges → easy, fast deburring For external and internal deburring Solid and durable Non-slip housing, chatter-free working Auction-ID: A1-44066-44

grinding diameter:300 mmgrinding length:600 mmcentre height:190 mmz-axis:865 mmx-axis:250 mmclamping length:1000 mmperipheral speed:45 m/secgrinding slide swivable +/-:8 °grinding wheel width x diameter:80 x 508 mmwork piece spindle speed:1 - 800 U/minweight of the machine ca.:5 tMachine with SIemens 840 C control- coolant device- Marposs measuring device

Auction-ID: A1-44736-37

grinding length:12000 mmgrinding width:2800 mmworkpiece height:2510 mmmax. workpiece weight:24.000 kgtable surface area:11990 x 2500 mmdistance between columns:2820 mmcross rail adjustment:2510 mmtable feed:1 - 40 m/mintotal power requirement:110 kWweight of the machine ca.:151 tdimensions of the machine ca.:32,5 x 9 x 6,73 m.machine is in top condition for high precision work!with CNC SIEMENS 840 D1 universal grinding head, 22 kW swivelling of the grinding spindle +/-110°grinding wheel dimension 700 x 130 mmvertical stroke 1000 mmwith dressing unit1 surface grinding head, 30 kWgrinding wheel dimension 600 x 150 mmvertical stroke 230 mmwith dressing unitcoolant and filtering unitdiverse grinding wheel flanges

Product: ROLLER'S Rondo 8–35 deburring machine (8–35 mm) The model is an inner and outer tube deburring for: Stainless steel pipes, steel pipes Copper, Brass Aluminium Plastic pipes Technical data: Tube diameter: 8–35 mm Material: Metal housing/hardened cutting edges Weight approx. 220 g Features: Many specially hardened cutting edges → easy, fast deburring For external and internal deburring Solid and durable Non-slip housing, chatter-free working Auction-ID: A1-44066-42

grinding length:1250 mmgrinding width:600 mmworkpiece height:730 mmtable surface area:1720 x 500 mmheadstock: dist. table - spindle center:900 mmmax. longitudinal movement:X-1450 feed range:10 - 20.000 mm/minvertical movement:Y-730 mmfeed range:0,2 - 3.000 mm/mincross travel:Z-550 mmfeed range:5 - 5.000 mm/minpower capacity:1500 U/min.- 44 kW / 8000 U/min. - 38 kW kW grinding wheel turining speeds:50-6.000 U/mincutting speed:max. 80 m/sec.weight of the machine ca.:11 twith CNC SIEMENS 840 Cauto. dynamic balncing system integrated in the grinding conusprofile grinding unit ( on table mounted ) Diamant profile rollers ( dia. max 140 mm , width max. 200 mm, hole 52 H3 ) speed 3000 rpmtwo magnetic plates ( 1000 x 400 mm, 1200 x 350 mm ) divers Flanges ect.

grinding length:600 mmgrinding width:300 mmtotal power requirement:7,5 kWnumber of spindle speeds:0-3000 grinding wheel motor:7,5 kWgrinding wheel diameter:300 mmdimensions of grinding wheel:76 x 20 mmABA magnetic table flat grinding machine

: gebraucht : 2019 : 5505 : prompt, Zwischenverkauf v : Niederlande : 2670 €: 1 : 100 x 2.000 mm: 20 - 76,1 mm: 1 : 3 kW: 190 kgDEMO MACHINE / MINT CONDITIONThe lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table.Incl. 5 pcs. grinding belts, 1 pce. gr ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 156560 €: 2958.98 €: 1200 mm: 850 mm: 1200 x 500 mm: 1200 mm: 1200 500 mm: 5 - 30 m/min: 0 - 5000 mm/min: 0,001 mm: 560 mm: 0 - 2000 mm/min: 0.001 mm: 500 - 2200 1/min: 11 kW: 3.7 kW: 3.1 kW: 2.4 kW: 4600 mm: 2950 mm: 2745 mm: 4610 x 2290 x 2500 mm: 6400 kg: 900 mm: 930 kg: 1250 kg: 405 x 50 x 127 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, checkout 7)Air purge spindleLongitudinal guides with double V shape, with Turcite-B coatingTransv ...

grinding diameter:280/320 mmgrinding length:750 mmcentre height:170 mmweight of the machine ca.:22,5 tdimensions of the machine ca.:4,7 x 3,65 x 3,0 m

weight of the machine ca.:15 t

weight of the machine ca.:24 tdimensions of the machine ca.:3900 x 3500 x 2500 m-the machine has no B axis -two grinding spindles with one grinding wheel each -The transport instructions can be found in the documentation (attachment). including Hoffmann KSM filter system Loading list availableOperating data v. 03/27/2023: Operating time: 21727 h / production time: 11960 h Machine documentation: 1 set of circuit diagrams, electrical plans, operating instructionsAccessories: 2 replacement measuring heads Marposs S/500; prism supports Other: Hoffmann KSM filter system Machine condition: according to age, due to processing with emulsion

KSS/filter/cooling systemsEmulsion

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11300 €: 216.96 €: 5 kW: 265 kg: 10-114 mm: 2 : 3-22 m/s: (2x) 50 x 940 mmto grind and polishfor round and oval tubesopening of sanding belts by footpedalmachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length:400 mmworkpiece weight:250 kgweight of the machine ca.:4,1 tswing diameter:250 mmgrinding spindle speed:2387, 2938 U/min

grinding diameter:20 mmgrinding length:20 mmmax. workpiece diameter:20 mmmin. workpiece diameter:1 mmgrinding wheel diam. min/max.:300-400 grinding wheel turining speeds:2.000-7.000 U/minWeight:950 kgdimensions: 1200 x 2100 mm

grinding length:600 mmcentre height:180 mmswing dia.:360 mmworkpiece weight:80 kgmax. dia. of grinding wheel:500 mmgrinding wheel width:80 mmgrinding wheel hole diameter:203,2 mmperipheral speed:45 m/secThere is also a 3200 liter coolant tank including cooling unit + fire extinguishing system.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2510 €: 150 mm: 150 x 2000 mm: 200 x 150 mm: 530 mm: 3.5 kW: 35 m/s: 475 - 1240 mm: 1100 mm: 550 mm: 1035 mm: 115 kgIndustrial-belt grinding machinePowerful motorEnclosed grinding head ensure a very effective extraction systemThermal overload protectionEmergency stopElectronic motor brakeAdjustable supportEye protectionStepless adjustable working heightSelf adjusting belt tensionerOperating manual in German or EnglishALTERNATIVEVersion TAS 150X/2 with 2 speeds € 2.960,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 73460 €: 1388.39 €: 610 mm: 600 mm: 600 x 300 mm: 600 x 300 mm: 420 kg: 700 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 350 mm: 440 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 2000 1/min: 5,5 kW: 0.75 kW: 1.1 kW: 1.1 kW: 2710 mm: 2428 mm: 2200 mm: 3500 kg: 975 mm: 355 x 50 x 127 mm10,4", grafic NC-control on swiveling arm with touch screen for:- seletion of working mode, program creation, graphic condition control, alarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatorautom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working areagrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED mach ...

: neu : ca. 4 Wochen ab Auftragse : Polen : 1595 €: 1 : 1 : 21 mm: 60 °: 2740-3290 U/min: 2.2 kW: 21 kgportable heavy-duty machine designed for bevelling steel plates and -pipesguide rolls for easy operationautomatic overload protectiontwo milling heads with 10 square cutting insertsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 76550 €: 1446.8 €: 460 mm: 445 mm: 460 x 200 mm: 450 x 200 mm: 0,1 - 25 m/min: 0 - 3000 mm/min: 0,001 mm: 220 mm: 340 mm: 0 - 3000 mm/min: 0.001 mm: 1000 - 7000 1/min: 3 kW: 0.7 kW: 1.1 kW: 1.1 kW: 2510 mm: 2515 mm: 2010 mm: 1550 kg: 1015 mm: 175 kg: 210 kg: Dm. 205 x 12,7 x 31,75 mm: 0,004 mm: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 4 angular contact ball bearings (P4, checkout 7)Longitudinal guides with double V shape, with Turcite-B coatingTransverse and verti ...