grinding machines used for sale (2,172)

honing length max.: 406 mmhoning diameter: 1.5 - 165 mmspindle turning speed range: 200-2500 U/minweight of the machine ca.: 0.6 tdimensions of the machine ca.: 1.3 x 1.35 x 1.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing length max.: 406 mmhoning diameter: 1.5 - 165 mmspindle turning speed range: 200-2500 U/minweight of the machine ca.: 0.48 tdimensions of the machine ca.: 1.3 x 1.35 x 1.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 700 mmgrinding width: 550 mmworkpiece height: 500 mmtable-size: 1320 x 500 mmgrinding wheel diameter: 400 mmweight of the machine ca.: 3.9 tMagnetic plate 1000x500mmwww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. working width 900mm. Working height opening 1 – 125mm. Feed speed. Feed speed variation 2.5 – 14m/min. Electrical. Main motor 1st head 7.5kW. Main motor 1st head 7.5kW. Conveyor motor 0.75 kW. Hammer head oscillation motor 0.4kW. Lift motor 0.18 kW. Electrical connection 400Volt. Cycles 50 Hz. Control current 110V. Total Installed power of system. Approx. 20 kW. Complete with VG Mistral 215 extraction, Airflow : 5500 m3h, Inlet diameter : 225mm. Belt head –W-. Contact roller: 150mm diameter made of special Flexible” vulcanised 45º Shore rubber with special profiled grooved face suitable for deburring and finishing. Hand wheel fine adjustment in height of the head with a precision of 0.01 mm to change pressure or for abrasive belt thickness with dial indicator readout. Outboard support: unlocking/ locking quick release grinding head support for abrasive belt change. Grindin ...

Operating voltage: 220/380 VConnection: 0.9 kWRated current: 3.6/2.1 ASpeed: 2900 rpmGrinding wheel dimensions: 200/230/51 mmReference: Walter - Lot 80 Auction-ID: A7-48268-11

bore capacity in steel (diameter): - mmthroat: - mmbore stroke: mmtotal power requirement: kWweight of the machine ca.: 400 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mmband length: 2000 mmband speed: m/mintotal power requirement: kWweight of the machine ca.: 90 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: - mmgrinding length: - mmcentre height: - mmmechanical: ja centre distance: 2000 mmweight of the machine ca.: 7,9 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: - mmgrinding length: - mmcentre height: - mmmechanical: ja centre distance: 2000 mmweight of the machine ca.: 7,9 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mGENERALÜBERHOLT Foto von ähnlicher bereits gelieferter Maschine- Schleifscheibenausrüstung LINKS 500mm- Schleifscheibenausrüstung RECHTS 400mm- Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard)- CNC-Steuerung FANUC 18i-TA- vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N- B-Achse- Kel-Set- hydraulischer Pinolenrückzug- Mikroverstellung am Reitstock- Werkstückspindelstock mit schwenkbarem Unterteil- Schleifscheibenausrüstung LINKS 500mm- Schleifscheibenausrüstung RECHTS 400mm- Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard)- CNC-Steuerung FANUC 18i-TA- vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, P ...

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mTeilüberholte Maschine mit Messprotokoll nach NeumaschinentoleranzNEUE Steuerung Eckelmann ENCmit BEMA SchleifsoftwareKEL-ASSIST für Kelco 90numerisch gesteuerte B-AchseInnnschleifrinrichtung Dia 80mmSchleifscheibe links Durchmesser 400mmSchleifscheibe rechts Durchmesser 300mmInnenschleifspindel HJN 828hydraulischer ReitstockMikroverstellungKEL SET MesssystemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Internal grinding machine: grinding diameter: 300 mmgrinding depth: 300 mmTravel distance - Z1: 470 mmTravel distance - X1: 200 mmTilt angle - B2: 1/1000 °power capacity: 3,5 kWExternal and face grinding unit (Z2/X2): Travel distance - Z2: 470 mmTravel distance - X2: 325 mmDrive power – External grinding spindles: 16,5 kW: 120 mmgrinding diameter - cylindrical: 400 mmsanding belt length: 400 mmgrinding wheel size: Ø 500 x 50 x Ø 127 mmWorkpiece spindle unit: Travel distance - U: 470 mmTilt angle – B1 with longitudinal adjustment: -1/+12 °Tilt angle - B1 with workpiece spindle unit: -20/+30 °Manual longitudinal adjustment of the workpiece sp: 470 mmDrive power – workpiece spindle: 3,8 kWturning speeds: 1-895 U/minLoad capacity - Spindle head: 200 kgCentre height above the swing bridge: 200 mmtotal power requirement: 47 kWweight of the machine ca.: 10 tdimensions of the machi ...

grinding diameter: - mmgrinding length: - mmcentre height: - mmdiameter: - mmlength: - mmtool adaptor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

filling capacity: 400 LiterUsable Volume: 300 Literfilling amount: max. 850 kgworkpiece sizes: max. 850 x 200 mmIndividual weight of workpiece: max. 30 kgturning speeds: 4.0 - 15.0 U/minInner drum width: 925 mmdrive motor: 380 Vweight of the machine ca.: 1950 kg.range L-W-H: 3100 x 1600 x 2000 mm good / well-maintained condition ()- in checked conditions - machinevideo - https://www.youtube.com/watch?v=xxnCddCmXe4Description:- LIMA cleaning machines for long concrete formwork parts, formwork clamps for flame-cutting parts, plasma-cutting parts, laser-cutting parts for punching and sawing parts- environmentally friendly, cost-saving, low-noise- drive with 5-fold V-belt via worm gear- maintenance-free spherical roller bearings- entire machine is highly soundproofed- dust extraction installed as standard- drum running time adjustable- speeds variably adjustable- the drum can be moved into a ...

grinding diameter: 155 mmgrinding length: 400 mmcentre height: 80 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 500 mmgrinding width: 200 mmworkpiece height: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 5000 mmgrinding width: 600 mmworkpiece height: 600 mmmagnetic clamping plate, electical: 5000 x 550 mmmax. dia. of grinding wheel: 420 x 127 x 100 mmautom. vertical feed: 0,001-9,999 mmtotal power requirement: - kWweight of the machine ca.: 15 tdimensions of the machine ca.: ca 11 x 2,5 x 3,5 moverhauled machineequipped with:- magnetic clamping plate 5000 x 550mm- hydraulic Unit- Vertical Head- inclined diamond dresser with autom. feed / adjustable speed- coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 200 mmprofile depth: 30 mmworkpiece length - max.: 2790 mmgrinding length: 2310 mmMaximum pitch of the screw: -/+ 50 °Maximum number of gears: 1-999 workpiece weight max.: 250 kgz-travel: 3000 mmx-travel: 185 mmmax. dia. of grinding wheel: 450-330 mmGrinding wheel thickness (with recess): 20-70 mmroll diameter: 120 mmSpeed of the grinding wheel spindle: 1500 - 6000 U/minWorkpiece spindle speed: 0 - 600 U/minSpeed of the pitch axis: 0-4 1/minSpeed of the dressing spindle: 1500-16000 1/minfeed speed z-axis: 0-10000 mm/minfeed speed x-axis: 0-10000 mm/mintotal power requirement: 150 kVAcontrol: Siemens Sinumerik 840D SL weight of the machine ca.: 30 tdimensions of the machine ca.: 10,65 x 5,37 x 2,75 mFeatures/Accessories: - Filtration system: KNOLL VL1500/5000 - many accessories—list to follow - documentation The data for this ad was created with ModulMWS - t ...

grinding diameter: 630 mmgrinding length: 3000 mmcentre height: 315 mmgrinding wheel size: 750 x 100 x 305 mmgrinding wheel width: 150 taper: MK 6 chuck diameter: 315 mmgrinding head swivelling: 90 Gradgrinding spindle head - swivable: 30 °table - swivable: 4,30 - 6,30 Gradgrinding spindle speed: 815 / 935 U/minspindle speeds: 8 - 57 / 28 - 150 mmgrinding sp.stock-cross tvl. frwd/rear/total: 420 mmgrinding head quick motion: 80 mmtable speed -stepless-: 0,05 - 4,5 m/minworkpiece weight: 1200 kggrinding spindle drive: 22 kWControl: Siemens 840D total power requirement: 56 kVAweight of the machine ca.: 13 tdimensions of the machine ca.: 9900×2980×1875 mmThe machine is suitable for grinding cylindrical and conical workpieces usinglongitudinal and plunge grinding methods. The table movement, the feed movement of the grinding headstock, and the tailstock quill return are hydraulically oper ...

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmControl: Fanuc 310is total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control GE Fanuc 310isHand panel for CNC control GE FanucWenger loader optionalTurned part with automatic indexing 1°Grinding head UR 1-2-3Grinding wheel equipment left 500 x 80 mmGrinding wheel equipment right 400 x 63 mmOperating unit for one high-speed internal grinding spindle MFV / MFZHigh-frequency internal grinding spindle MFN 1090Coolant supply through the workpiece spindleDressing unit on the upper tableSwivelling holder for PCD diamond platesBasic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devicesKEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URSKEL-TOUCH on the workpiece headstock for internal and external grindingPreparations for Movomatic ESZ 400 or M ...

honing diameter: 200 mmstroke: 600 mmthroat: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m2 Honing spindles -both with two step expansions mechanic/hydraulic -Rotary table with 4 stations. 2 x 180° or 4 x 90° -air gage measuringmade for honing liners with max diameter 120mmMachine is like new because it worked only few months.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mmband length: 2.000 mmband speed: U/minmotor: 400 Vloading area: 450 x 160 mmtotal power requirement: 4,0 kWdimensions of the machine ca.: 1,10 x 0,70 x 1,15 m- Serial-No.: 200.184The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: - mmgrinding length: - mmcentre height: - mmmechanical: ja centre distance: 2000 mmweight of the machine ca.: 7,9 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mmgrinding width: 375 mmworkpiece height: 350-375 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material thickness: 0,5-50 mmmaterial width: 1500 mmfeed: 4 m/minOperating hours: 900 hweight of the machine ca.: t: dimensions of the machine ca.: mThe machine was completely overhauled in December 2015The tech. Data aremanufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morethan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business,please contact us. You can find further offers on our website. Tours arepossible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: 6 tdimensions of the machine ca.: mVerkauf erfolgt mit FunktionsprüfungAuf Wunsch mit neuer Tischgeometrie gegen AufpreisC-Achse zum PolygonschleifenB-Achse mit HandschwenkungSchleifscheibendurchmesser links 400mmSchleifscheibendurchmesser rechts auf AnfrageInnenschleifeinrichtungReitstock mit FeinverstellungThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmControl: Kelco 90 total power requirement: kWweight of the machine ca.: 6 tdimensions of the machine ca.: mVerkauf erfolgt mit FunktionsprüfungAuf Wunsch mit neuer Tischgeometrie gegen AufpreisB-Achse stufenlosSchleifscheibendurchmesser links und rechts 400mmInnenschleifeinrichtungReitstock mit FeinverstellungSinuslineal am WSSKel-SetPassive Lämgspositionierung Movomatic TMP91The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mmgrinding length: 1500 mmcentre height: 175 mmgrinding wheel diameter: 400 mmgrinding wheel width: 50 mmbore: 127 mm: MK5 work piece spindle speed: 20-400 U/minworkpiece spindle - bore: mmgrinding head swivelling: 360 °grinding spindle head - swivable: 180 + - °grinding spindle speed: 1500,1700,2200 U/min: 0,001-0,030 mm/Ø: 0-0,95 mm/Ø: ± 6 °longitudinal feed of the table: 1750 mmtable speeds: 0,02-6 m/min: 130 kg: 130 inkl. Spannugkg kg: mmgrinding depth: mm: 80 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 5,6 x 2,0 mKomplett überholt mit Umbau auf Technik der modernstenAusführung.-Neuer Schaltschrank-Modernes Hydraulikaggregat-Moderner Werkstückspindelstock-Moderner Reitstock mit Feinverstellung-Moderner Steuerblock,Zustellung,Getriebekasten-Innenschleifvorrichtung für Spindeln mit 80mm Durchmesser- ...

grinding diameter: 100 mmgrinding length: 400 mmcentre height: 100 mmz-axis: 425 mmtable speed -stepless-: 0,05 - 5,00 m/minworkpiece spindle head rotation speed: 90 - 1.000 U / min.grinding head swivelling: -2 - +30 Gradtailstock quill taper MT: 3 grinding wheel speeds: 1.800 / 2.000 U/mingrinding motor: 3,70 kWdimensions of grinding wheel: 350 x 50 x 127 mmtotal power requirement: 7,00 kWweight of the machine ca.: 2,50 tdimensions of the machine ca.: 3,00 x 2,50 x H2,20 mWith 2-axis digital display FAGOR, coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 20-35 mmgrinding depth: 200 mmswing diameter: mmweight of the machine ca.: 4 ttotal power requirement: kWdimensions of the machine ca.: mgrinding diameter 20-35mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.