grinding machines used for sale (2,502)

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 €: 344.45 €: 350 mm: 300 mm: 500x160 mm: 350x150 mm: 300x150x55 mm: 2800 1/min: 3,6 kW: 1020 mm: 820 mm: 2170 mm: 440 kg: Dm. 200x78x78 mmThis Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it isequippedwith a long column supported by four bearings and is opportunely stiffenedby a sturdy column support.This Surface grinding machine, due to its stiffness and geometrical stability,is highly suitable for grinding with precision pieces of notable height: single or mass-produceddie-shop components, moulds, punches, gears and others.Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motorto the axis,equipping this model of Grinding machine with fixed table,allow preserving perfect work conditions over the years, too.CAST IRON BED to maintain the geometric s ...

grinding length: 600 mmgrinding width: max. 320 mmworkpiece height: max. 500 mmmagnetic clamping plate: 300 x 605 mmhoriz. table movement: longitudinal: man. max. 750 mmhorizontal table movement: cross: max 340 mmsanding disc diameter: 355 mmtable load: max. 420 kggrinding wheel width: 50 mmbore: 127 mmspindle turning speed range: 1500 U/minrapid traverse vertical: 400 mm/minControl: weight of the machine ca.: 2500 kgdimensions of the machine ca.: ca. 2800x2000x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 5549 : prompt, Zwischenverkauf v : Taiwan : 63870 €: 1207.14 €: 1 : 1 : 610 mm: 610 mm: 600 x 300 mm: 300 x 600 mm: 650 mm: 700 mm: 5 - 25 m/min: 0 - 2,250 mm/min: 3 - 32 (0,001) mm: 320 mm: 5,5 kW kW: 0.74 kW: 1 kW: 1 kW: 2950 mm: 1490 mm: 2080 mm: 2200 kg: 355 x 50 x 127 mm: 1.450 U/min: 0,001 mm10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic s ...

width of the strips: 50.0 mmband length: 940 mmband speed: 3.0 - 22 m/minturning speeds: 1450 U/mintube diameter: 16.0 - 114 mmradius: 180 °total power requirement: 4.75 kWweight of the machine ca.: 265 kgrange L-W-H: 1000 x 750 x 1300 mmFurnishing:- stationary pipe belt grinders- Automatic material feed with separate drive motor- Replacement sanding belts- Stepless speed adjustment- Manual adjustment of tube tension- Polish bent pipes up to 180 (angle).- Manual work possible without feed- CE mark / declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 2000 mmband speed: 15/30 m/stotal power requirement: 3,0 kWweight of the machine ca.: 159 kgdimensions of the machine ca.: 768 x 1185 x 1417 mmMobile belt sander PASOVEC 75 RUNNERPasovec 75 RUNNER - the special belt grinder developed forSurface grinding applications, especially for grinding weld seams in thematerial surface. Pasovec 75 Runner removes unwanted layers that occur whenSheet metal rolling or after sheet metal cutting with plasma oroxygen arise.Innovative, multifunctional machineStepless adjustment of the grinding depthEquipped with a dead mans switchStation for flat grinding small workpiecesLow running costsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 232970 €: 1700 mm: 850 mm: 1600 x 600 mm: 2x 800 x 600 mm: 0 - 20 m/min: 0 - 5000 mm/min: 0,001 mm: 685 mm: 0 - 2000 mm/min: 0.001 mm: 675 mm: 500 - 2200 1/min: 11 kW: 6165 mm: 3320 mm: 2850 mm: 5730x3200x3350 mm brutto mm: 9500 kg: 900 mm: 1335 kg: 1850 kg: 405 x 50 x 127 mm: 3,1 / 3,1 kW: 7.5 kW: X: 0,008, Y/Z: 0,005 mm: X: 0,006, Y/Z: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, class 7)Longitudinal guides with double-V-shape wit ...

grinding band dimension: 75 x 2000 mmband speed: 33 m/secweight of the machine ca.: 90 kgengine output: 4 kWturning speeds: 2800 U/minAccessories / equipment:- Vibration-free running smoothness- Adjustable working height- S1 motors with 100% duty cycle- Surface and contact grinding possible- Removable protective cover for surface grinding- Connection piece for double suction- Built according to the CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 200 x 25 mmShaft diameter: 20 mmturning speeds: 2.800 U/minsaw band speed: 20 m/stotal power requirement: 0,75 kWmachine weight ab.: 17 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: mmmax. dia. of grinding wheel: mmwith manual ongoing: 0manually feed: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 2000 mmband length: 75 mmband speed: 16,5/33 m/sturning speeds: 1400/2800 U/minweight of the machine ca.: 75 kgVolume: 83 dBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mmband speed: 33 m/sek.total power requirement: 3 kWweight of the machine ca.: 95 kgturning speeds: 2800 U/minStandard equipment:- Removable dust catcher- Fine adjustment of the band adjustment- Sanding belt- Eye protection- Motor protection switch- Operation manual- Sanding table- working height adjustment- surface grinding padThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 156920 €: 2965.79 €: 1200 mm: 850 mm: 1200 x 500 mm: 1200 mm: 1200 500 mm: 5 - 30 m/min: 0 - 5000 mm/min: 0,001 mm: 560 mm: 0 - 2000 mm/min: 0.001 mm: 500 - 2200 1/min: 11 kW: 3.7 kW: 3.1 kW: 2.4 kW: 4600 mm: 2950 mm: 2745 mm: 4610 x 2290 x 2500 mm: 6400 kg: 900 mm: 930 kg: 1250 kg: 405 x 50 x 127 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, checkout 7)Air purge spindleLongitudinal guides with double V shape, with Turcite-B coatingTransv ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 122570 €: 2316.57 €: 600 mm: 500 mm: 600 mm: 325 mm: 600 mm: 205 kg: 450 mm: 500 - 2200 1/min: 5,5 kW: 19 kW: 2800 mm: 2800 mm: 2610 mm: 2850 x 2000 x 2470 mm: 3500 kg: 820 mm: Dm. 355 x 38 x Dm. 127 mm: 0,001 mm: 1.7 kW: 2.4 kW: 10 - 150 1/min: 0.005 mm: 0.003 mmiSurface control with 10,4", touchscreen for fully automatic grindingin machine manual wheel balancingtraveling column rib structureAC servo motors für Y/Z axes and rotary table1 pc. wheel flange1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mmCoolant equipment with automatic paper filter and magnetic separatorautomatic dresser on the table, with compensationfully enclosed splash guardelectromagnetic round chuck, fine pole pitch (1+3 mm)working lampwarning lampoperating manual in German and EnglishALTERNATIVE:model version FRG-600S with Smart iControl for profile grinding morepr ...

max. dia. of grinding wheel: 200 mm: 40 mmturning speeds: 1400/2800 U/minvoltage: 380 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: mmgrinding length: mmcentre height: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band speed: 33 m/sgrinding band dimension: 75 x 2000 mmtotal power requirement: 3 kWweight of the machine ca.: 75 kgturning speeds: 2800 U/minStandard equipment:- Knife set for flat steel- Complete knife set for angle steel shears- Complete normal punching equipment- Quick release device for punches up to 31 mm- Support table for punching device, rectangular notching and flat steel shears- Bending stamp with matrices V 40 and V 70- Electric contact stop (1.000 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75.0 mmband length: 2000 mmband speed: 30.0 m/sekgrinding width: 500 Plantisch mmsuction capacity: 630 m³/htotal power requirement: 3.75 kWweight of the machine ca.: 90.0 kgrange L-W-H: 1100 x 550 x 1035 mm current new price incl. accessories approx. 2.500 euros incl. replacement sanding belts special price on requestEquipment :- High quality construction- Drive roller is crowned- This means that the sanding belt is automatically centered on the roller- Fully vulcanized contact roller for maximum service life and smooth running- Tool-free and therefore quick, uncomplicated change of the sanding belt- Stepless height adjustment- for optimum adjustment of the belt sander to the user- Freely adjustable metal fence- for optimum and safe guidance of workpieces when Use of the large surface sanding area- Belt speed optimized by design- to prevent the workpiece from burni ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 111670 €: 2110.56 €: 400 mm: 500 mm: 400 mm: 225 mm: 400 mm: 50 kg: 450 mm: 500 - 2200 1/min: 5,5 kW: 19 kW: 2800 mm: 2800 mm: 2610 mm: 2850 x 2000 x 2470 mm: 3450 kg: Dm. 355 x 38 x Dm. 127 mm: 0,001 mm: 1.7 kW: 2.4 kW: 10 - 150 1/min: 0.005 mm: 0.003 mmiSurface control with 10,4", touchscreen for fully automatic grindingin machine manual wheel balancingtraveling column rib structureAC servo motors für Y/Z axes and rotary table1 pc. wheel flange1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mmCoolant equipment with automatic paper filter and magnetic separatorautomatic dresser on the table, with compensationfully enclosed splash guardelectromagnetic round chuck, fine pole pitch (1+3 mm)working lampwarning lampoperating manual in German and EnglishALTERNATIVE:model version FRG-400S with Smart iControl for profile grinding price on requ ...

internal diameter: 150 mmgrinding depth: 200 mmstroke of the table: 425 mmbore: 80 mmspindle speed:: 17000 U / minworkpiece turning speeds: 125/176/246/350 U/minmax. swing dia.: 250 / 420 mmtotal power requirement: 2,2 / 0,5 / 0,9 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,40 x 1,20 x 1,45 mInternal grinding diameter: 150 mmMax. grinding depth: 200 mmTable travel: 425 mmBore diameter: 80 mmGrinding spindle speed: 17,000 rpmWorkpiece speeds: 125 / 176 / 246 / 350 rpmSwing diameter: 250 / 420 mmTotal power requirement: 2.2 / 0.5 / 0.9 kWMachine weight: approx. 2 tSpace requirement (L × W × H): approx. 2.40 × 1.20 × 1.45 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 5544 : prompt, Zwischenverkauf v : Polen : 1370 €: 1 : 75 mm: 2.000 x 75 mm: 200 x 75 x 42 ø mm: 605 mm: 3000 1/min: 3 kW: 1025 mm: 500 mm: 1000 mm: 76 kgIndustrial belt grinder with following features:- Separate emergency stop- Motor brake- Standard- Reliable- Simple and practical operation- Easy to adjust- Quick belt change without tools- 5-year guarantee on the motor- Optimal safetyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250 mmgrinding length: 1000 mmcentre height: 125 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mmband length: 2000 mmband speed: 1400 / 2800 U/mintube diameter: 40 - 140 mmvoltage: 380 Vtotal power requirement: 3.0 kWweight of the machine ca.: 360 kg. Exhibition machine - like NEW not yet in use () New price approx. 6.500 euros Special price on request- Machine video - identical machine -https://www.youtube.com/watch?v=LXP09NFTnlw&t=1sThe FALKEN PN 38/140 is a multifunctionalgrinding machine for grinding pipe and profile endsEquipment:- robust electro-motor pipe profile grinding machine- enables notches up to an angle of 50°- large-dimensioned surface grinding surface with protective cover- 2x belt speeds- control panel, front left - including emergency stop button- grinding belt can be replaced quickly and easily- vice movement to the right - left, forwards & backwards possible- side grinding dust collection container- horizontal & vertical grinding alig ...

saw blade diameter: 250 - 1250 mmgrinding wheel diameter: 250 mmtotal power requirement: 3,5 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 850 x 1000 x 1800 mCircular saw blade sharpening machine for sharpening medium to coarse metal saw bladesSaw blade diameter Cold circular saws : 250 - 1250 mmHot circular saws : 900 - 1700 mmTooth pitch up to : 42 mmGrinding wheel double height : 25, 37, 50, 75 and 100Grinding wheel revolutions : 2000 and 2500 rpm Grinding wheel diameter : 250 mmPre-cutting tooth can be chamfered on both sides : up to 45 degreesCutting edge geometry for hot circular saws : = -4 degreesWeight of the machine : 1000 kgexternal dimensions : 850 x 1000 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle taper: MK 3 total power requirement: 4 kWweight of the machine ca.: 0,620 tCenter bore grinding machine- 160 x 1000 LO- small/ large drilling/grinding length: 50/ 1000 mm- Spindle holder: MK 3- small/ large workpiece diameter: 6/ 160 mm- Grinding head in spindle hole: 125 mm- Oscillation size: 0 to 5 mm- Oscillation double strokes: 125 / min- Speeds: 55/ 110 rpm- Connected load: 4 kW- Weight: 620 kgspecification: motor. Material rotation oscillation Switch cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt width: 150 mmsanding belt length: 2000 mmband speed: 16,5/33 m/secengine output: 2,6/3,37 kWMotor speed: 1400/2800 UpMweight of the machine ca.: 105 kgDomestic equipments:- vibration-free running smoothness- Working height adjustable- S1 motors with 100% duty cycle- Surface and contact grinding is possible- Removable protective cover for surface grinding- Connecting piece for double suction- Built to CE standardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 250 mmworkpiece height: 400 mmtotal power requirement: - kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2 x 3 x 2 mNo. 0444Jig grinder HAUSER 3 SMWorking area: 400 x 250 x 4002-axis digital displayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 5200 mmgrinding width: 1300 mmworkpiece height: 320 mmControl: Siemens 840 D main drive: 306 kWtotal power requirement: 380 kWweight of the machine ca.: tdimensions of the machine ca.: 11,21 x 3,2 x 3,85 mCNC production surface grinding machine with segment headGrinding length 5200 mmGrinding width 1300 mmWorkpiece height 320 mmControl Siemens 840 DPassage width 1300 mmGrinding height 320 mmGrinding motor 306 kWGrinding motor speeds up to 320 rpmGrinding motor feed, infinitely variable 0.5-35 m/minGrinding motor infeed in steps of 0.002-1 mmGrinding motor infeed continuously stepless upto 5 mm/minSpace requirement approx. 11.21 x 3.2 x 3.85 mIncluding accessories.- Coolant system- Magnetic clamping device- Switch cabinet- Oil mist extraction- DocumentationDimensions (length x width x height):Bed: 11200 x 2400 x 1600 mm, weight 28000 kgGrinding head: 3000 x 2500 x 3100 m ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 22110 €: 424.51 €: 457 mm: 460 x 146 mm: 450 x 150 mm: 482 mm: 180 mm: 1900 mm: 1400 mm: 2130 mm: 680 kg: 208 x 12,7 x 31,75 mm: 1,5 kW: 3 mm: 0,01 mmmanual vertical feedmanual longitudinal and cross movement of the tablegrinding wheel spindle on 4 high precision angular contact bearingselectro-magnetic chuck150x450 mmcoolant equiptment with filtermanual dresser with diamondgrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED machine lampmachine and equipment according to the CE-regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 3000 mmgrinding width: 900 mmworkpiece height: 600 mmmagnetic clamping plate, electical: 3000 x 900 mmPole pitch: 18 mmgrinding wheel size: Ø 500 100 mmcontrol: Mitsubishi 520 total power requirement: 18,5 / 5,5 kWweight of the machine ca.: 19 tdimensions of the machine ca.: 9 x 4,5 x 3,5 mPacking: ca.13 x 2,5 x 3,5 mRetrofit 1999EXW price / Ex FoundationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 4533.22 €: 300 x 40 x 51 mm: 2,2 kW: 1250 1/min: 42 mm: 540 mm: 530 mm: 1180 mm: 800 x 600 x 1400 mm: 90 kgWith machine stand, integrated suction, emergency stop pushbutton and brake (Art.317.779)Quiet running, maintenance-free motorLaterally closed protective hoodsStable, adjustable workpiece supportsHigh safety comfort due to adjustable spark deflectorsSuitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc.Motor circuit breaker and undervoltage releaseSpark/eye protection on both sidesConnection cable with CEE plug 16 A1 grinding wheel each coarse and fineALTERNATIVE:Version without suction (Art. 317.776)Version without stand, suction and brake/emergancy push button (Art. 317.764)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.