grinding machines used for sale (2,179)

Rösler mass finishing machine incl. belt dryer, vibrator & placement system Auction-ID: A7-44493-95

Double bench grinder with table Auction-ID: A7-44493-55

Rösler mass finishing machine incl. belt dryer, vibrator Dimensions: Drying plant: H:1900 W:1800 L:3000 Vibrator: H:1500 B:1800 L:1800 Mounter: H:1700 W:1300 L:2100 Auction-ID: A7-44493-110

Auction-ID: A1-40973-41

: neu : ca. 6 Monate ab Auftragse : Taiwan : 122120 €: 2308.07 €: 600 mm: 500 mm: 600 mm: 325 mm: 600 mm: 205 kg: 450 mm: 500 - 2200 1/min: 5,5 kW: 19 kW: 2800 mm: 2800 mm: 2610 mm: 2850 x 2000 x 2470 mm: 3500 kg: 820 mm: Dm. 355 x 38 x Dm. 127 mm: 0,001 mm: 1.7 kW: 2.4 kW: 10 - 150 1/min: 0.005 mm: 0.003 mmiSurface control with 10,4", touchscreen for fully automatic grindingin machine manual wheel balancingtraveling column rib structureAC servo motors für Y/Z axes and rotary table1 pc. wheel flange1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mmCoolant equipment with automatic paper filter and magnetic separatorautomatic dresser on the table, with compensationfully enclosed splash guardelectromagnetic round chuck, fine pole pitch (1+3 mm)working lampwarning lampoperating manual in German and EnglishALTERNATIVE:model version FRG-600S with Smart iControl for profile grinding morepr ...

Auction-ID: A1-40973-35

Remas Bench Grinder Auction-ID: A7-44493-130

Auction-ID: A1-40973-39

Auction-ID: A1-40973-114

Auction-ID: A1-40973-33

: neu : 2025 : 050068 : prompt, Zwischenverkauf v : Taiwan : 39860 €: 761.33 €: 1 : 457 mm: 450 mm: 457 x 203 mm: 200 x 450 mm: 500 mm: 530 mm: 5 - 25 m/min: 960 mm/min: 0,4 - 6 mm: 230 mm: 0,002 - 0,04 mm/min: 2850 1/min: 1,5 kW: 0.75 kW: 0.04 kW: 0.19 kW: 3,7 kW: 2200 mm: 1575 mm: 1950 mm: 1854 x 1549 x 2210 mm: 1320 kg: 215 kg: 250 kg: 203 x 12,7 x 31,75 mmcontrol panel on swiveling armaut. vertical feedgrinding wheel spindle on 4 high precision angular contact bearingselectro-magnetic chuckcoolant equiptment 34 lt with magnetic separator and dust exhaustmanual dresser with diamondgrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED machine lampmachine and equipment according to the CE-regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 950 mmgrinding length: 6500 mmgrinding wheel diameter: mmswing diameter: 1000 mmturning length: 6500 mmworkpiece weight: 18000 kgPower: 65 kWSpeed: 6,7 - 60 U/min.1986 retrofit with stepless feed drives- concave and convex grinding device- ball grinding device- 2 steadies anti friction - coolant device withpaperband filtration- taper grinding max. 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 50 mmtotal power requirement: 0,75 kWweight of the machine ca.: 0,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A7-44059-78

: neu : ca. 6 Monate ab Auftragse : Taiwan : 108950 €: 2059.16 €: 610 mm: 600 mm: 600 x 300 mm: 600 x 300 mm: 5 - 25 m/min: 0 - 3000 mm/min: 0,001 mm: 350 mm: 440 mm: 0 - 3000 mm/min: 0.001 mm: 500 - 1800 1/min: 11 kW: 2.2 kW: 4020 mm: 2450 mm: 2080 mm: 3400 x 2220 x 2530 mm: 3700 kg: 975 mm: 195 kg: 370 kg: 355 x 50 x 127 mm: 1,1 / 1,1 kW: 0,005 mm: 0,005 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 4 angular contact ball bearings (P4, class 7)Longitudinal and cross guides with heavy duty needle roller bearing for lo ...

Auction-ID: A7-44059-68

Automatic feed - internal and external grinding Auction-ID: A3-40494-3324

ELB Surface and Profile Grinding Machine SWBE 010-NC-K – with Siemens SINUMERIK Control For sale is a robust and precise surface and profile grinding machine from the renowned German manufacturer ELB-SCHLIFF, built in 1985, with modern Siemens SINUMERIK CNC control (retrofit). Technical data: - Table clamping surface: 1,700 × 450 mm - Grinding range: 1,000 × 550 × 400 mm - Total weight: approx. 6,800 kg - Machine type: SWBE 010-NC-K - Control: Siemens SINUMERIK (CNC, with diagnostics and PROFIBUS/PROFINET) Equipment: - CNC operation and manual operation possible - Override control for feed and spindle - Electronic control panel with colour display - Emergency stop and extensive diagnostic functions The machine is ideal for tool and mould making, mechanical engineering as well as for precise individual and small series production. The solid construction ensures low-vibra ...

workpiece diameter: - mmworkpiece weight: - kgworkpiece height: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mmworkpiece height: - mmnumber of wheels: 4 total power requirement: 4,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 118700 €: 2243.43 €: 1200 mm: 730 mm: 1.200 x 500 mm: 1.200 x 500 mm: max. 30 m/min: 3.7 kW: 27 kVA kW: 4600 mm: 3040 mm: 2200 mm: 6400 kg: 990 mm: 930 kg: 1250 kg: 405 x 50 x 127 mm: 0,001 mm: 500 - 2.000 U/min: 11 kW10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listMax. table speed (X axis) 30 m/minvertical feed by servo drive and ballscrew spindletransversal feed by servo motor and ballscrew spindledouble V-slide wasy (turcite-B) for table longitudinal movegrinding wheel spindle on 6 high precision angular contact b ...

Grinding Capacity Parameter Specification Maximum Workpiece Length approx. 450 mm Maximum Workpiece Width approx. 200 mm Maximum Grinding Height approx. 350 mm Auction-ID: A1-43934-72

Grinding range 2 - 13 mmSharpening angle min./max. 90 - 140 degreesConnected load 230 VMachine weight approx. 10 kgDimensions approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5) Auction-ID: A7-44325-489

Longitudinal travel: 500mm; Transversal travel: 400mm; Vertical travel: 400mm; Grindstone: 250mm Auction-ID: A1-43934-20

Grinding is accurate and rapid, easy operation with no skill to grind. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. The electrically controlled and powerful motor: stable frequency, strong horsepower and long service life. Bearing shaft and locking unit. The machine is set up with the function of adjusting a point (central point) size, which can effectively coordinate with the material of drill hole and the rotation speed. It can control the quality precision and prolong the service life of the drill bit. Standard with CBN grinding wheel for the HSS material. Grinding Range:Φ3-Φ13, Point Angle:100°~135°, Power:AC220V, Motor:120W, Speed:4400rpm, Standard Equipment:Grinding wheel:CBN (for HSS)×1, Eleven collets:Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ9,Φ10,Φ11,Φ12,Φ13 Machine condition: unchecked. Approx. Transport dimension: LxWxH  ...

3 UNITS/SETS OF LON0008 PACKED TOGETHER. A SINGLE LON0008 CORRESPONDS TO: Specialize in grinding screw tap. It's precise, easy operation and efficient, also can save large sum of expense for purchasing blade annually. With diamond wheel, can be secondary re-used, with accurate angle and long service life. The electrical controlled high-rate DC motor features stable power, strong horsepower, efficient and long service life. Patent product can grind all the front cutting face, also include the front cutting lip. M20 tap shank is within 14 for grinding. Point Angle:5°~30°, Power:220V, Motor:160W, Speed:4400rpm, Standard Equipment:Grinding wheel:CBN (for HSS), Standard collets:Φ5,Φ7,Φ8,Φ9,Φ13,Φ14 Machine condition: unchecked. Approx. Transport dimension: LxWxH 360 x 270 x 310 mm; Approx. Weight: 16kg The item for sale may not be the one shown in pictures, but will have equal spe ...

Maximum Part Diameter: from 200 mm to 500 mm. Main Motor Power: from 2 kW to 10 kW Auction-ID: A1-43934-27

Disc diameter 300mmDisc width 40mmSpeed 1500rpmPower 1.1KWsee pictures Condition: untested (6) Auction-ID: A7-44325-604

This grinder is ideal for regrinding tools such as face mills, drills, TIG welding needles, and more.is supplied as standard with:Accessories for lathe toolsAccessories for drills Accessoriesfor milling5C Spring collet pliers (4-6-8-10-12 mm)Clutch wrench 38-42Grinding disc wrenchAllen key M3-M8ScrewdriverDiamond grinding wheel Ø 100 x 50 x 20Grinding wheel: Ø 100 x 50 x 20Diamond pinSpring collets: 3/16\" - 5/16\" - 3/8\" - 1/2\" Grinding range 3 -28 mmAngle adjustable from - to horizontal 0-180 degreesAngle adjustable from - to vertical 0-45 degreesAngle adjustable from - to negative 0-52 degreesClamping range 3 - 28mm mmSpeed 5200 rpmConnected load 230 / 250 Volt / WattDisc diameter 100 x 50 x 20 mmMachine weight approx. 45 KgDimensions L x W x H 0.5 x 0.4 x 0.4 m Condition: never used / new (5) Auction-ID: A7-44325-407

500mm x 250mm table 550mm x 270mm stroke Auction-ID: A1-43934-24