boring mills and machining centers used for sale (3,240)

Simultaneous 5-axis design - Control system SIEMENS 840 D SL - Working range X= 780, Y= 600, Z= 520 mm - C-axis 360° - B-axis -50°/+110° - Table clamping surface 720 x 540 mm - Spindle speed 20 - 15,000 1/min - Tool magazine 60 places - Tool holder HSK 63A - High-pressure system IKZ 40 bar - Probe 3D Weight 8,100 kg

Offered out of insolvency is a ready-to-use tapping machine Manufacturer: Flott Model SB 15 GL Built in 1989 Masch.No.34177063 Specifications: Cutting capacity M2-M12 Recording MK 2 Pinol stroke 80mm Projection 200mm Chuck Bilz WFP 1 + inserts Drill chuck Röhm 0-10mm Foot switch Digital display Pinolhub Single continuous cycle Emergency stop Speeds from 80-3150rpm 380 volts Motor power 0.75KW max. dimension between table and holder 380mm Total height approx. 1700mm Accessories: 8 pcs lead screw--pitch-1.5-1.25--1.75--0.8--0.7--0.5--0.45--1.0 Operating instructions Weight approx. 200kg

From insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Infinitely variable speeds per potentiometer 80-2010rpm automatic feed 0.1--0.2--0.3 Digital speed display Coolant pump Tapping function with foot switch Work light Pinol stroke 150mm Projection 300mm Recording MK 4 Drill chuck Röhm Supra 3-16mm Table clamping surface 330x320mm Height of machine 1930mm Weight approx. 350kg 3KW Power 380 volts

Key data: 670 mm, 830 mm, 600 mm

Control: HEIDENHAIN ITNC 530 Travel: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm A +120° to -120°, C 360° Workspace Turntable diameter 800 mm, 9 T-slots, Table load 1200 kg, Tool changer Tool holder: HSK-A 63 96-fold tool changer Tool length max.: 300 mm Tool diameter max.: 75 mm Tool diameter with adjacent empty station max.: 125 mm Tool weight max.: 7 kg Tool change time: 3 s Rapid traverse and feed Express feed X Y Z 60 m/min, + max. speed A-axis 50 rpm C-axis 100 rpm Acceleration X Y Z max. 7 ms², General data Repeatability/positioning accuracy for new delivery 0.004 mm/0.008 mm (VDI/DGQ 3441) incl. tool holders with tools on the tool changer, Oil mist extraction IKZ Conveyor Nominal power 90 kVA Full load current 125 A max. current load 200 A 400 V 50 Hz

Drilling capacity steel/GG: 23 mm Spindle holder: 3 MK Projection: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 - 1180 rpm Feeds: 0.1/0.6/0.25 mm Drive motor: 380 V, 1.25/2.15 kW Dimensions: 850 x 400 x 1770 mm Weight: 280 kg

Multi-spindle drilling machine make : Burkhard und Weber / Arboga With interchangeable table Dimensions : LxW 800 x 800 Equipped with 10 spindles, drilling diameter 13.5 mm Cam derailleur, automatic and set-up mode. 2 Coolant pumps . Propulsion : electro-hydraulic. Very powerful, it can be powered with 14 active spindles at the same time. become. Total weight: approx. 8.0 tons. (Forklift loading by GEDE possible)

KÄRCHER ROBO 30 pipe boring machine for pipes, flat material and profiles With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass. can be drilled or milled at an angle or at an angle up to  50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled can be plugged through. With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also transport flat material or other profiles with the feed and at the desired angle up to over Make 50° single-sided holes or through holes. The clamping jaws in the self-centering vice have a recess at the top for flat material. We are unrivalled when it comes to converting to another material! The feed is positioned at 0.1 mm with the counter with absolute or chain gauge. With the ROBO 30, you don't need to set limit switches or cams for ...

Offer 24033 Specifications: - Tapping capacity M 3 - M 24 - Working range ( swivel radius ) 1800 mm - Infinitely variable speeds up to 475 rpm - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - Various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

spindle diameter: 110 mmx-travel: 2.100 mmy-travel: 1.500 mmz-travel: 1.000 mmw-travel: 500 control: HEIDENHAIN TNC 430 connected load: kVAWorking Spindle: - boring quill diameter: 110 mmspindle taper: DIN 69871 ISO 50 spindle power: 22 kWtransmission ratio: 2 turning speed range: 2.000 U/minclamping table: - max. workpiece weight: 4.000 kgsurface area: 1.100 x 1.300 mmfeeds: feed range X-, Y-, Z- axis: 0 – 10.000 mm/minfeed range W-axis: 0 - 10.000 mm/minrapid motion - x-axis: 10.000 mm/minrapid feed Y, Z, W-axis: 10.000 mm/mintotal power requirement: 22 kWweight of the machine ca.: 23.000 tdimensions of the machine ca.: 7,1 x 6,5 x 3,7 mEquipment.• CNC-control HEIDENHAIN 430• support bearing• manual milling head• coolant tank with pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor

CNC Machining Center Vertical DECKEL-MAHO - DMC 63 V Built in 2002 in good condition. Control Heidenhain TNC 430 Heidenhain Hours: 10985 Specifications: Main spindle Speed range - main spindle 20 - 8,000 rpm Drive power - main spindle 13 / 9 kW Max. torque 83 / 57 Nm Tool holder SK 40 Workbench: Table clamping surface 800 x 500 mm max. table load 500 kg Installation height max. 240 mm Number of T-slots 5 T-slots - width 14 H12 mm T-slots - spacing 100 mm Distance between spindle nose and table 150 - 650 mm Feeds Feed rate X, Y, Z: 30,000 mm/min Rapid traverse ( X / Y / Z ) 30 m/min Tool changer: Tool changer 24 pos. max. tool diameter 80 mm max. toolthrough. with a free neighbor's box. 140 mm max. tool length 300 mm max. tool weight 7 kg Total power requirement 30 kVA Machine weight approx. 4 t Space requirement approx. 4.0 x 3.5 x 2.7 m Accessor ...

CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. tool width 80 / (130) mm max. tool length 250 mm max. tool weight 6.0 kg max. total weight 80 kg Tool - Tool change time 1.6 sec Changeover time span - span 6.0 sec Feeds: Rapid traverse 30 m/mi ...

x-travel: 1000 mmy-travel: 1000 mmz-travel: 950 mmControl: FANUC total power requirement: - - - kWweight of the machine ca.: - - - tdimensions of the machine ca.: - - - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 750 mm, 800 mm, 850 mm

Spindle speed (max.): 15,000 revolutions per minute Spindle speed (min.): 50 revolutions per minute Rapid traverse X-axis: 60 mm/min Rapid traverse Y-axis: 60 mm/min Rapid traverse Z-axis: 60 mm/min Weight: 16,000 kg Equipment: Documentation/Manual Subject to technical error and prior sale

Key data: 30 mm

Specifications: Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 – 2240 rpm Spindle motor 1.1 / 1.6 kW Radius approx. 320 mm

Specifications: Tapping capacity M 10 – M 45 Cutting capacity in ST M 36 Recording MK 2 Motor power 4 kW Speeds 35 – 185 rpm

table surface area: 170 x 170 mmbase plate surface area: 170 x 170 mmthroat: 185 mmquill stroke: 65 mmspindle turning speed range: 500 / 896 / 1473 / 2428 U/mincolumn diameter: 65 mmtotal power requirement: 0,37 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1625 mm, 860 mm, 760 mm

Control Ultimax 4 Travel X/Y/Z: 1625/860/760 mm Speed 8000 min-1 Tool magazine for 40 Wkz., SK 40 IKZ Conveyor

- Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - Projection 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm. - Operating voltage 380V-50Hz - Infinitely variable speed adjustment, by means of an adjustment lever - Engine speed in 2 stages, 700/1435 rpm - Tapping device with rotation direction change after reaching the end stops - Coolant device fully installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - Precision machine vice new (test winner)

x-travel: 750 mmy-travel: 750 mmz-travel: 725 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 840DNC-rotary table B-axisautomatic tool changer for 320 toolspallet changing device, 2 pallets 500 mm x 500mmcoolant through spindle device IKZ (80 bar)chip conveyorcoolant deviceTechnische Daten / technical details:X-Weg längs / X-travel longitudinal 750 mmY-Weg senkrecht / Y-travel vertical 750 mmZ-Weg quer / Z-travel cross 725 mmB-Achse / B-axis 360 °Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpmWerkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/minEilgang / rapid feed 60 m/minAntriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kWGewicht der Maschine ca. / weight ca.  ...

Guide cartridges for Hagen & Goebel tapping machines Machine type HG6 Original price at the manufacturer 322.-€ net. I offer them the guide cartridges at half the original price. There are several inclines, please inquire about the required incline.

bore capacity in steel (diameter): 50 mmarm length: 1250 mmworkpiece height max.: ca. 1150 mmbore capacity in cast iron: 60 mmspindle taper: MK 5 spindle turning speed range: 12,5 - 1000 U/minfeeds: 0,06 - 0,5 mm/Ucrossrail adjustment vertical: 620 mmcolumn diameter: 350 mmtotal power requirement: 7,7 kWweight of the machine ca.: 4,6 tdimensions of machine L x W x H: 2,53 x 1,15 x 2,82 mAccessories: swivelling box table, coolant- additional column guide at the end of arm -The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 23 mmthroat: 300 mmbore stroke: 150 mmtable-size: 300 x 410 mmspindle taper: MK 2 total power requirement: 1,4 kWweight of the machine ca.: ca. 315 kgdimensions of the machine ca.: ca. 700 x 900 x 1900 mmMachine has fallen over. A sheet metal cover and 2 levers of the cross lever broke off. Concentricity has been tested and is OK. Functional video available. Machine can be viewed and tested on site.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 200 mmbore stroke: 70 mm: 16 mmspindle taper: MK3 spindle turning speed range: 50 - 3000 U/min: 220 mm: 425 mmtable surface area: 700 x 210 mmconnected load frequency: Vmax. distance between table and spindle-nose: 470 mmtotal power requirement: 1,5 kWweight of the machine ca.: 230 Kgdimensions of the machine ca.: 0,75 x 1,05 x 1,2 mDrilling and milling machine with- variable spindle speed- Digital depth display- Left / right switch- Cross support- swiveling spindle head- Feeds via hand crank- Tool case with contentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mmy-travel: 600 mmz-travel: 500 mmtable surface area: 2500 x 650 mmspindle taper: SK 40 control: HEIDENHAIN, TNC 426 ATC: 36 Postotal power requirement: 60 kWweight of the machine ca.: 7,5 t- with coolant through spindle -Accessories: NC-dividing unit (= 4th axis) with tailstock, center height 225 mm, 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant- new spindle on X-axis in 2020The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 120 mmarm length: 2500 mmworkpiece height max.: ca. 1800 mmbore capacity in cast iron: 160 mmdrilling radial min./max.: 880 / 2825 mmthroat min.: 555 mmcolumn diameter: 650 mmbore spindle diameter /taper: 90 / MK 6 mmdiameter of quill: 160 mmbore spindle turning speed range: 10 - 660 U/minbore depth: 650 mmfeeds: 0,07 - 3,0 mm/Udistance spindle/base plate: min. 300 / max. 2100 mmvertical adjustment of the arm: 1150 mmbase plate surface area: 3000 x 1550 mmtotal height of machine: 4500 mmtotal power requirement: 15 kWweight of the machine ca.: 16 t- right-/left spindle run- thread cutting deviceAccessories: DRO HEIDENHAIN on X-and Z-axis (arm and boring depth)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling diameter 3-25 mm in ELB Drilling depth in one stroke (mm) 810 with resetting 1,200 Tapping up to M20 – larger by milling Manual tool changer Spindle holder SK 40 altv. HSK 63 Drive power 5.5 kW / ED 100 Travel X (longitudinal) 1,050 mm Travel Y (vertical) 800 mm Table load up to 2,500kg Table size 1,000 x 1,500 mm CNC rotary table 0-360° manual

bore capacity in steel (diameter): 50 mmarm length: 1250 mmworkpiece height max.: ca. 1150 mmbore capacity in cast iron: 60 mmspindle taper: MK 5 spindle turning speed range: 25 - 2000 U/minfeeds: 0,06 - 0,5 mm/Ucrossrail adjustment vertical: 620 mmcolumn diameter: 350 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4,6 tdimensions of machine L x W x H: 2,50 x 1,08 x 2,50 mAccessories: box table 1100 x 700 x 550 mm, coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10370Manufacturer: FANUCYear of construction: 1997Type of control: CNCControl: FANUC Series 16-MStorage location: HalberstadtCountry of origin: IrlandX-Travel: 500 mmY-Travel: 380 mmZ-Travel: 300 mmMachine length: 1560 mmMachine width: 2060 mmMachine Height: 2218 mmRotary Table (Lxw): 650 x 380 mmTable Load: 200 kgMax. Tool Weight: 2 kgMax. Tool Length: 120 - 200 mmMax. Tool Diameter: 65 mmTool change time: 1 sTool Taper: MAS BT30, MAS P30T-1 (45°) Numbers Of Tools In Magazin: 10 Tool changer: Revolvertyp (Spindel unabhängig vom Revolver) Turning Speed Range - Stepless: 1-15000 mm / minRapid Traverse X-Axis: 48 m / minRapid Travel Y-Axis: 48 m / minRapid Traverse Z-Axis: 48 m / minWeight Of The Machine Ca.: 1,7 tMax spindle speed: 8000 min⁻¹Positioning accuracy in one direction (1): 0,006 / 300 mmPositioning repeatability (2): +/- 0,002 mm

Ref. -No.: 10361Manufacturer: SCHIESSYear of construction: 2023Type of control: CNCControl: Siemens, Heidenhain, Fanuc - Configurable as requiredStorage location: HalberstadtCountry of origin: Germanyfinancing: nach AnfrageSupport sleeve diameter: 130 mmX-Travel: 3000 mmY-Travel: 2000 mmZ-Travel: 1600 mmSpindle stroke: 800 mmB-Axis: 360 °W-Axis: 800 mmSpindle Taper: SK50 Max. Tool Weight: 25 kgClamping Area: 1250 x 1250 (or configurable as required) mmT - groove width: 22 mmT - slot spacing: 160 mmSwivelling: Configurable as required °Numbers Of Tools In Magazin: 40, 60, 120, 200, 240 Spindle Speed: 2900 RPMMax. Torque: 2500 NmDrive Capacity - Spindle Motor: 41 kW