other machines for plastic used for sale

Conveyor - Wittmann Feedmax S3-NET / New, unused (6 pcs.) Year of manufacture: 2023 Location: Lodz, Poland Description: Suction conveyor with a hose and suction probes The conveyor has its own control system. On the control system, you can set the proportions in which the raw material is to be transported It is possible to buy a plastic container as well as a proportional valve for transporting 2 raw materials, e.g. regrind and original Price: On request

The main machines in the line: fluid mixer Trusioma hot and cold KO-kneader BUSS Mixing mill Buzuluk 660x2100 mm 4-roll calender Buzuluk 700x1800 mm, inverted "L" tempering and stretching device behind the calender – roller track film thickness profile measuring device winding device

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use

Conveyor belt / belt conveyor Belt width: approx. 1,400 mm Axle distance: approx. 8,000 mm Drive: 2.2 kW

air pressure:8 bar Air consumption:NI 18 l/min.weight:110 kgdimensions of the machine ca.:700 x 300 x 1000 mm

A T-connector assembly fixture Ruchser for precise and time-saving installation of T-connectors in window or door profiles is available. Usable length: 6000mm, max. mullion width: 250mm, profile supports: 6, clamps: 4, positioning stops: 4, working height range: 950mm-1100mm, machine dimensions X/Y/Z: approx. 6450mm/1200mm/1750mm. Documentation available. An on-site inspection is possible.

PALLMANN AGGLOMERATOR PFV 250/20, Average thrpughput rate depending on materials - see pdf below, Including :, AGGLOMERATOR PFV250, n.2 disks Ø250 mm., It has been working with with PET and PS -possible different die on request, HOT MELT GRANULATOR, PS-HG 400x500, constructed in Stainless steel,, granulatiojn chamber mm.500 x 400, Screen size 10 mm, water cooled, Rotary air lock (PZSL 2.0 G), pneumatic system ro separate fines, Fan conveyor system, Storage bin PFST, Control cabinet, Voltage 415 -3Ph-50Hz, Constructed in 2001, this line is offered reconditioned., Possible addition of first granulator, on separate request

Drying container Piovan 2 x 100 L BJ 1998

Conveyor Bonds for KM 150 and KM 300

SALDOFLEX MODULA M-2011 S, for T-shirt bags, open top bags, sealing width 1.100 mm, min/max bag length: 400/1.200 mm, 3 lanes, Unwinder: 1.700 mm, Film speed: 160 m/min, Cycles: 300 cycles/min, Servo drive, Photocell, Gusseting units, control panel, Constructed in 2007, totally refurbished in 2021, availability: immediate, working width: 1100, conditions: very good, type: T.shirt and open top bags 1.100 max sealing width

Vaporetta VDG 1404 delaminator for separating 3 films connected to each other (carrier film, useful film and protective film). Material width max. 400 mm The still connected foils are passed from a roller through 2 sheets, at the rear edge of which they are separated from each other. The separation is achieved by pulling the foils in different directions. The protective film and the carrier film are rolled up on spindles via slip clutches and disposed of later. The usable film runs through a silicone-coated pair of printing rollers and then into the cutter via various deflections and a dancer that coordinates the laminator with the cutter. The machine can also be used as a sheeter for roll stock to produce sheets from roll stock. With documentation.

Rasp cutters, plastic cutters, mold making cutters, Styrodur cutters, Styrofoam cutters-Rasp cutters 40 pieces-Hole: Ø 30 mm-Type/Sizes: see photos-Transport dimensions: 800/600/H420 mm-Total weight: 89.4 kg

Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: VEB Nossener, Stiftmühle -Drive motor: ZSE MEZ 1.1 kW -Individual components: see photos -Dimensions: 960/630/H1165 mm -Weight: 101 kg

Age 1995, For sale outside Europe, Automatic Elevator Tray-feeder, Auto-cross conveyor feeder to main Print Unit, Universal screw Denester, ARCOTEC CG30-2 Corona Pretreatment System, 8-mandrel Indexing Turret, with Mandrel Holders for Tubs, 6 x individually hinged dry-offset Print Heads., Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer, 2 x Form Rubber Rollers dia. 71 and 100 mm, 2 x Oscillating rollers, 2 x Idler Rollers, 1 x Ink Transfer roller (Ductor Roller), 1 x Ink Fountain, Ink Washing System on Print Heads, Positive Suction-cup pick & place and Take-off, 2 x Color Base Printer, 6 kW Jumbo UVITERNO UV Curing Tunnel, Counter/ Stacker station, Max. Container dimension 135 x 180 mm, Max. Printing Length 417 mm, Max. Height of Containers 125 mm, Min. height of Containers 30 mm, Max. speed 9000 containe ...

Keyence Agilista 3200W High Resolution Industrial 3D Printer Material Jetting AR-M2 AR-G1L AR-G1H Type: Agilista - 3200W Manufacturer: Keyence Corporation, Japan Date of purchase according to invoice: 18.05.2017 Operating time: 40,985 h Printing time: 1,907 h Specifications: - Printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (Silicone Rubber [High Hardness]) - Support material: AR-S1 (water-soluble support material) - Build space: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 μm, normal Resolution AR-M2: 20μm, AR-H1: 20μm, AR-G1L/H: 30μm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions 95 x 70 x 136 cm - Weight 188 kg 3D, 3D Printer, 3D Printer, Agi ...

A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible.

Zwei Eckverbindungsmaschinen Schüco für den Fensterbau stehen zur Verfügung. 1) Schüco CC 120 A, Baujahr: 2008, max. Profilhöhe: 120mm, max. Stanzhöhe: 105mm, min. Rahmen-Innendimensionen X/Y: 400mm/400mm, Maschinendimensionen X/Y/Z: ca. 1450mm/1500mm/1000mm, Gewicht: ca. 700kg. 2) Eckverbindungsmaschine Schüco, Baujahr: 1997, Nenndruck: 0,7MPa, Luftverbrauch: 100l/Ecke, Gewicht: ca. 650kg. Eine Besichtigung vor Ort ist möglich.

Guillotine-type mechanical shear for cutting plastic sheet in industrial processes. Brand: Jwell Cutting width: 1440 mm Maximum thickness: up to 6 mm Geared motor: 7.5 hp (5.5 kW) Type: Mechanical Guillotine Applications: - Cutting rigid or flexible plastic sheet - Post-process extrusion - Plate and film production - Preparation for thermoforming

Division 2100 with end mill 500 W, camera, magneta,, interface for good, bad sorting, tracefile function, for disconnecting printed circuit boards.

Bundle offer Markforged 3D printer, consisting of 1 Onyx One 3D printer and 1 Mark Two 3D printer from Markforged in good condition considering its age, with the following accessories:, Equipment:, - 2 pieces of onyx material (2024), unopened, - 5 pcs. glass fiber endless material, (2017), unopened, - 2 dry boxes for material storage, Runtimes/number of print jobs:, - Onyx One: 4980h / 779 print jobs, - Mark Two: 6640h / 750 print jobs, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, network connection: WiFi, Ethernet, USB, Dimensions in mm (w x h x d): 575mm x 322mm x 366mm, mass: about 30 kg, Electrical connection / consumption: 200-240 VAC, 50 Hz 100-127 VAC, 50/60 Hz, certification:  ...

On behalf of our customers, we offer a used 3D scanner bundle:, - 1 piece Leo 3D Scanner built in 2019, - 1 x Space Spider, year of manufacture 2018, - Usual accessories included (carrying case, power supply, cable), The devices are in perfect condition and were used for testing purposes only.

On behalf of a customer, we are offering an HP4200 MultiJetFusion 3D printer system with a post-processing station and build units. The device comes from a medium-sized company and is in good, used condition. The maintenance contract (3DaaS) was active until 2024., - Number of print jobs: < 1000, Scope of delivery:, - 1 x HP4200 MJF 3D printer, - 1 HP Processing Station, - 2 pcs. Build Units, - various spare parts such as filters etc., Optional services performed by certified HP technicians:, - Professional disassembly and packaging. Delivery in an original HP box (packaging not included, deposit required)., - Installation and commissioning, - Instruction in operation, operation, and aftercare (in English). Duration: 3-5 days, depending on the desired scope, printing technology: HP Multi Jet Fusion Technology, Installation space in mm (x/y/z): 380 x 284 x 380 mm (15 x 11.2 x 15 inches),  ...

We offer a Tumaker BigFoot Pro 500 Dual Pellet 3D printer (Model: TUMAKER BF Pro 500 Dual – Direct Drive HR x 2) on behalf of our customer, For sale is a high-quality 3D printer from the brand Tumaker, model BigFoot Pro 500 Dual with Bowden and direct-drive extruders., - Acquisition: February 28, 2024 – First owner, - Service life: 11 months, - Condition: Fully functional, no defects, no repairs or maintenance necessary, - Delivery: Device is securely packed in original shipping packaging – ready for dispatch, - Test print: Not possible because already packed, - Availability: Immediately, Ideal for professional applications with high build volume., extruder units: 2 (Direct Drive HR - Pellets), Compatible nozzle diameters: Filament: 0.4, 0.6, 0.8, 2.0, 4.0, 5.0 Pellet: 0.4, 0.6, 0.8, 2.0, 4.0, 5.0, Included nozzle diameters: Filament: 0.4mm, Pellet: 0.8mm, building m ...

ProJet 860Pro ColorJet Printer 3D printer used by 3D Systems for sale., Accessories: Depowdering station, All specifications and operating/installation conditions are in accordance with the manufacturers brochures. Errors and typographical errors excepted., Layer thickness: 0.1mm, Installation space in mm (x/y/z): 508x381x229, number of nozzles: 5x HP11 printheads, building material: VisiJet PXL Core, LBL 3D printing powder, VisiJet Binder, LBL 3D Binder, communication: LAN (Ethernet), Machine dimensions in mm (wxhxd): 1190x1160x1620, Weight in kg: approx. 370KG empty weight, Dimensions machine in mm (wxhxd): 1190x1160x1620

The Projet 660Pro full-color 3D printer from 3D Systems is for sale. The machine is in excellent condition and has been recently serviced according to the manufacturers specifications. Several models are available.

The Projet 660Pro full-color 3D printer from 3D Systems is for sale. The machine is in excellent condition and has been recently serviced according to the manufacturers specifications. Several models are available.

The Projet 660Pro full-color 3D printer from 3D Systems is for sale. The machine is in excellent condition and has been recently serviced according to the manufacturers specifications. Several models are available.

The Projet 660Pro full-color 3D printer from 3D Systems is for sale. The machine is in excellent condition and has been recently serviced according to the manufacturers specifications. Several models are available.