sheet metal working used for sale (3,306)

Qty. 1 Second-hand sheet metal processing machine Mfc.: Vernet Behringer Type: FG2005 CNC Built: 2012 Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm Max. section: 1340 x 1000 x 60 mm Electrical Cabinet Power supply: 3 x 380 V, 50 Hz, Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar

sheet width: 3150 mmplate thickness: 16 mmdistance between columns: mmweight of the machine ca.: 16,3 ttotal power requirement: kWdimensions of the machine ca.: mfoot switchmotorized arrester behindcutting angle adjustmentTechnische Daten / technical details:Schnittleistung / max. cutting capacity 16 mmmax. Schnittlänge / max. cutting length 3150 mmAnschlag / limit stop 1000 mmGewicht der Maschine / weight 16300 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hole diameter in sheet thickness: Ø 30 in 12 mmhole diameter in sheet thickness: Ø 19 in 19 mmpressure capacity max.: 45 toweight of the machine ca.: 1.700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6200 mm, 1 mm

Motor scissors, 5 stop fingers, laser protection, with back gauge, Projection: 1000 mm, Colour: blue, Total power requirement: 3 kW, Insertion depth: 1000 mm, with roller shears, number of stands: 5 pieces, opening width: 200 mm, Bending angle: 145 degrees Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Machine Number: 8432

Specifications: - Max. working width 2020 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment pre-selectable 0 - 135 ° - Upper bolster clamping via eccentric lever + foot pedal - Largest opening width / stroke of the upper beam 100 mm - Height adjustability of the lower beam 25 mm - Space requirement approx. W 2950 x H 1200 x D 800 mm - Weight approx. 1450 kg

Coil weight: 2 x 2 ton Material width: 310 mm Coil exterior diameter: 1300 mm Expansion range: 380 - 460 mm Weight of machine approx.: 2,5 ton

Working hours laser on: 28.313 (15.05.2024) h Working hours beam on: 8.421 (15.05.2024) h Laser power: 6000 Watt Working range laser: 3048 x 1524 x 70 mm Max. steel: 25 mm Max. stainless steel: 30 mm Max. aluminium: 30 mm Max. copper: 12 mm Max. brass: 12 mm Length: 11000 mm Width: 6050 mm Height: 2565 mm Machine weight: 12000 kg Electrical connected load: 31 kW

Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg

Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg

Working hours machine: 36101 h Max. punching force: 200 kN Working range punching: 2000 (4000) x 1270 mm Control: Fanuc 18-P Length: 6190 mm Width: 5000 mm Height: 2450 mm Machine weight: 12000 kg

Working hours laser on: 57785 (23.03.2022) h Working hours beam on: 40160 (23.03.2022) h Laser power: 5000 Watt Control: Siemens 840 D Working range laser: 3000 x 1500 x 115 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 11100 mm Width: 4600 mm Height: 2400 mm Machine weight: 12000 kg Electrical connected load: 105 kVA

CONTROLS  PLC SIEMENS S5 115 U OVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 350 mm  sheet thickness max.: 8 mm  coil weight max.: 4 to  feed velocity max.: 10 m/min  feedstock transport direction: left to right DECOILER  design: single reel   sheet width max.: 350 mm  coil weight max.: 4 to  max. diameter of coil: 1500 mm  mandrel expansion range from: 370 mm  mandrel expansion range up to: 530 mm  feed velocity max.: 10 m/minLEVELLER UNIT  sheet width max.: 350 mm  sheet thickness max.: 8 mm  number of leveller rolls: 21   diameter of leveller rolls: 50 mm  number of infeed-/outfeed rolls: 2   diameter of feed rolls: 120 mm  feed velocity max.: 10 m/minELECTRICAL SPECIFICATIONS& ...

Coil weight: 1 ton Material width: 150 mm Coil exterior diameter: 1200 mm Expansion range: 480 - 520 mm Thickness: 0,5 - 4 mm

Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW

Decoiler Coil weight: 5 ton Material width: 80 - 500 mm Coil exterior diameter: 1800 mm Expansion range: 508 mm Speed: 50 m / min Leveller / Straightener Material width : 50 - 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 65 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 150 mm Material thickness: 1 - 8 mm Feeding speed: 50 m / min Feeding length: 0,1 - 9999,9 mm

Offer 25079 Specifications: - max. working width 3100 mm - max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 14 pcs - Engine backgauge - E. footswitch - Front angle stop - Stroke rate 15 rpm - Drive 380 V / 22 kW - Table height 800 mm - Space required including back gauge, without front support arms -ca. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

Offer 25086 Specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 100 t - Projection 510 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 25 mm - E. contact stop - div. 10 pcs. punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Qty. 1 Second-hand recently overhauled rolling mill Mfc.: Shinkwang Type: 4-Hi Built: 2014 – recently overhauled Previous rolling material: Aluminum 1000 and 3000 alloy Strip width: 650 mm max Strip thickness: 6.5 - 0.2 mm Work Roll: Dia. 210 x 750 mm length Backup Roll: Dia. 600 x 700 mm length Coil weight: 3000 kgs max Rolling speed: 180 m/min Main Motor: 300 kW, 400 V Winder: 150 kW, 400 V Rewinder: 150 kW, 400 V Spare Rolls: WR 4 ea, BR 2 ea

sheet width - max.: 0650 mmcoil weight: 2,00 tcoil internal dia.: 420 - 520 mmcoil external diameter: 1500 mmpower requirement: 2,0 kWtotal power requirement: kWweight of the machine ca.: 1,40 tdimensions of the machine ca.: 1,60 x 1,60 x 1,60 mdecoiler is sold as is without commissioningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23250 Specifications: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg -with - Pipe circular saw - Inside and outside tube end burr device - Pipe collaring device - Without tools

Qty. 1 Second-hand 4-Hi Cold Rolling Mill – Still in operation Mfc.: Japanese Company Built: 1972 Moved to present location and revamped in 2017 Status: Still in operation! Type: 4-hi cold mill 180Φ/650Φ600 mm Material: Aluminum alloy 1000 and 3000 alloy Strip Width: 400 ~ 700 mm Thickness: 0.3~7 mm Rolling speed: 150 m/min Main Motor: 300kW, 0-330/650 rpm

Manual Swivel Bending Machine Specifications: - Max. working width 1030 mm - Max. material thickness 3 mm - Bending angle approx. 0 - 135 ° - lockable with end stop - Upper beam is operated with side hand crank - Max. stroke upper beam 120 mm - Max. adjustment bending beam 45 mm - Bending process is supported by eccentric weight - Space requirement approx. W 1750 x H 1120 x D 450 mm - Weight approx. 620 kg

Key data: 3020 mm, 3 mm

one. Bending cheek presentation, foot pedal Sheet width: 3020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: white/blue Total power requirement: 32 A Upper beam stroke: 200 mm Bending angle: 145 degrees Dimensions: 4300 x 2600 x 1900 mm Machine weight: 3960 kg Machine number: 220478

Gr. working width: 1250 mm for sheet metal up to: 1.75 mm Opening width upper beam: 70 mm Adjustability bending brace: 50 mm Space requirement: 1880 x 740 x 1140 mm

Offer 25059 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - Bending tools , Ø 1/2" R 67 mm, Ø 1" R 67 mm ,

sheet width: 2000 mmplate thickness: 2,25 mmdistance between columns: 2040 mmtotal power requirement: 7,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,2x1,7x1,1 mSN-No. 380/6The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mmplate thickness: 3 mmdaylight upper clamping: 350 mmbending angle max.: 0-135 °adjustment of lower and bend clamping: 80 mmcontrol: Fastimatic M200 power requirement: 2,2/1,5 kWweight of the machine ca.: 2460 kgdimensions of the machine ca.: 3,2 x 2,8 x 2,1 mCondition: ready for operation: Condition: very good: CE signed: Video available on our website.: Electric 400 Volt: CNC-control with screen: Mot. back gauge: 1000 mmFoot switch: Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Little used machine, very good co ...

pressure: 100 tpunching cross-cut in cmm: -- stroke: 100 mmthroat: 510 mmwork height max.: 1100 mmTwist power: 31 Durchm. in 25 mmchannels - flange: 100-400 mmNumber of ventilators: 80-400 mm: 100-400 mm: 100-550 mmpunch stroke: bei 20 mm Hub: 60 p.Minsheet thickness max.: bei Luftbiegung: 10 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 1,7 x 0,9 x 2,3 mVideo available on our website.: Condition: ready for operation: Electric 380 Volt: Diverse punches and dies: Foot pedal: Machinefeets: Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3050 mm: 06,5 mm: -: 0,5-2,5 °: 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 tpunching cross-cut in cmm: mmstroke: 37 Min./20 mmthroat: 500 mmstroke: max. 60 mmwork height max.: 1060 mmtotal power requirement: 5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.