sheet metal working used for sale (3,306)

plate thickness: 0,5...5 mmsheet width: mmpunching force: 20 ttravel -x axis: 1250 mmtravel -y axis: 750 mmnumber of strokes: 20 per minram stroke max. - stepless: 40 mmtotal power requirement: 14 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mpressure: t- max. thickness: 0,5 … 5 mm- travel in X : 1250 mm enlargeable to 2000 mm- travel in Y axis: 750 mm enlargeable to 1000 mm- number of strokes: 20 per min- stroke: 40 mm - Stanz- Ø 100 mm 1,5 mm-( punch diam. and thickn.) Ø 50 mm 3,5 mm Ø 16 mm 12,0 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-28 mmtotal power requirement: 1,5 kWweight of the machine ca.: tdimensions of the machine ca.: m- bending type: 4-28 mm- bending angle: 190° (ohne Rohr)- bending radius: 1,5 x D – 2,0 x D- nominal pressure: 250 bar- operating pressure: 3095 mm n. re.- delivery rate: 4,5 l/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band width: 850 mmtotal power requirement: 3,8 kW5 to. Schleicher reel- max load: 5 to- Belt width: 1500 mm- Belt thickness: 1 mm- Year of construction: 23/04/92- Voltage: 24/380 V 50 Hz- Power: 3,8 KWIncluding: Coil lifter, feed unit, control panel, hydraulic unit, control cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 16 mmdistance between columns: 60 mmtotal power requirement: 30 kWweight of the machine ca.: 13,2 tdimensions of the machine ca.: m- thickness at max. cutting length:16 mm(mild steel 12 mm high grade steel)- cutting length: 3100 mm- cutting angle: max. 2° 25 - depth of gap of standards: 60 mm- rear stop behind blades: 01100 mm- backstop Motor. motoric blade gap adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending angle max. +/-: 180 + 10 °tube: 4100 mm- Round tube steel up to 30 x 2.2 mm ²- Round tube stainless steel up to 30 x 1.5 mm- Square tubes 20 x 2.5 mm- Bending time 90 degrees: 1.5 sec (feed)- Length feed speed: 450 mm- Radius range max 125 mm- Free-standing bending head 850 mm long- Bending axis drive electrohydraulicThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band width: 200 mmband speed: 20 m/min: 150 kg- Internal clamping range: 200- 550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2,5 mmdistance between columns: 1045 mmdaylight opening: max. 47 mmbending angle max.: 135 °weight of the machine ca.: 290 kgdimensions of the machine ca.: 1,35 x 0,86 x 1,17 mUnused exhibition machine at a special price:Sengmentable upper rail, upper clamping foot-operated, manual bending clampingoperate. The bending performance refers to 380 N/mm² strength.This is an exhibition machine at a special price, so we are selling it without any warranty.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

sheet width: 700 mmplate thickness: 4,0 mmdistance between columns: 720 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 0,95 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mmworkpiece length: -- mmwork piece width: 15 mmrange of angles: 15-50 °plate thickness: 6-40 mmtotal power requirement: 1,5 kWFeed speed: 3,5 m/min.dimensions: 530 x 395 x 860 mmweight of the machine ca.: 94 kgThe UZ15 RAPID machine is one of the fastest beveling machines withautomatic feed on the market. It is not only suitable forworkshops, but also for assembly work. It has a steplessBevel angle adjustment system. Also, the machine with an automaticfeed equipped. Working with the UZ15 Rapid is therefore very convenient.- For conventional steel (up to a strength of 600 MPA/87022PSI), brass, copper and aluminum materials- For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm- Application range of sheet thickness 6 - 40 mm- The bevel angle can be easily adjusted from 15° to 50° continuously withoutthat a part needs to be replaced- Double-sided bevel (X ...

tube diameter: 60 mmwall strength: 3 mmbending radius min.: 2 x Rohr-Ø ÷ R200 mmbending angle: 0 - 180 °gas tube pipelines: 2 (60.,3mm) mmspeed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kWweight of the machine ca.: 0,7 t- Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length)- Electromechanical drive of the bending axis- hydraulic clamping- mandrel feed / extract- 30 programs x 9 bending angle + correction angleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 950 mmworkpiece width - max.: 1,0 - 50 mmsandingbelt width: 970 mmsandingbelt length: 1900 mmweight of the machine ca.: 1,8 tThe SMD 123 RE is a universal entry-level machine for all-round deburringUniform edge rounding and surface grinding of sheet metaldry process. Suitable for processing steel, stainless steel and aluminium. The non-slip conveyor belt enables safe transport and theMachining even of small workpieces. The two rotor heads ensure an all-round uniformEdge rounding and a directionless finish. The intuitive operation via touch panel allows every employeeget to grips with the machine quickly. The SMD 1 models are installed and ready for operation in a short time. The compact design saves valuable production space. Low acquisition and operating costs lead to shortamortization periods and guarantee economical processing of yourworkpieces.consisting of:- Grinding  ...

x-travel: 1200 mmy-travel: 600 mmz-travel: 600 mmControl: Heidenhain iTNC 530 spindle speed:: 6000 1/min.spindle taper: 50 SKspindle drive: (S1) 10 kWtable surface area: 1300 x 600 mmtable load: 1200 kgfeed speeds: 1-10000 mm/minrapid travel x/y/z: 20/20/15 m/mindistance table - lower edge spindle: 125-725 mmtotal power requirement: 25 kVAweight of the machine ca.: 7,5 tdimensions of machine: 3600 x 2300 x 3000 mmEquipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer- Max. tool diameter 80/150 mm- Max. tool length 250 mm- Max. tool weight 8 kg Preparation for hydraulic machine vice Preparation for 3-D measuring probes Chip conveyor Coolant system, coolant through spindle 20 bar Machine documentationWorking hours (date 1st. November 2024):- Control on: 60.818 h- Machine on: 59.598 h- Program cycle: 22.283 h- Sp ...

sheet width: 3100 mmplate thickness: 50 mmpre-bending: 40 mmtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,7 x 3,0 x 3,0 m4-ROLL Hydraulic Plate Rolling MachineWorking length 3100 mmMaximum thickness Pre-bending 40 mmBending 50 mmYield Point: 240 N/mm2Number of rolls 4Motor Power 55 kWMin. diameter mm - Ø Top Roll Diameter x 3Top roll Ø 540 mmBottom roll Ø 510 mmSide roll Ø 440 mmLength 6700 mmHeight 3000 mmWidth 3000 mmWeight 40.000 kgWith:Cone bending deviceInduction hardened rollsDigital readout for side rollsFully welded steel (St-52) frameSeparate moveable control panelDual bending speedsElectronic ParallelismAll rolls are mounted in spherical roller bearingsHydraulically opened/closed drop end controlled from control panelActivation of cone rolling function and position adjustment via buttons onthe control panelCentral rolls ...

sheet width: 1000 mmplate thickness: 3,3 mmdistance between columns: 1050 mmdiameter of upper rolls: 90 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,39 tdimensions of the machine ca.: 1,4 x 0,9 x 1,2 mmSheet metal bending machine with special dimensions:- Capacity 700 x 4 mm- Conical bending- Swing-out top roller- Emergency release safety device- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 700 mmplate thickness: 4,0 mmdistance between columns: 720 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 0,95 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 tworkpiece diameter: 320 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 5 mmplate thickness: 1000 mmdistance between columns: mmtotal power requirement: 4 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mmplate thickness: 3,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 95 mmtube diameter: 140 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,35 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 8 mmblade length: 250 mmangle adjustable from - to: fest table surface area: 840 x 750 mmtotal power requirement: 3,0 kWweight of the machine ca.: 1,3 tdimensions: 1,4 x 1,1 x 1,5 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,5 mmroll diameter: 98 mmthroat: 160 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 550x1400x1500 mDelivered with:• hydraulic version• 4 set of wheels• Foot control• Brake motor• Emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 30 mmsquare edge steel: 25 mmL-beam: 80 x 80 x 8 mm: 200 x 13 / 350 x 6 mm: 40 tthroat: 175 mmwork stroke: 32 mmwork height max.: 980 mmhole diameter in sheet thickness: 20 x 15 / 38 x 8 mmtotal power requirement: 3,0 kWweight of the machine ca.: 0,62 tDimensions (LxWxH): 1,0 x 0,8 x 1,3 0Profile steel scissors with- 1 foot trigger- Support tables- Rectangular notcher- Hole punch including toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 x 5 mmsquare edge steel: 16 x16 mmround bar steel: 18 mmL-beam: 100 x 8 mmdimensions: 400 x 290 x 280 mmweight: 35 KgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate thickness: 8 mmpre-bending: total power requirement: 7,5 kWweight of the machine ca.: 3,6 tdimensions of the machine ca.: 3600x1250x1350 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,2 mmroll diameter: 62 mmthroat: 100 mmtotal power requirement: 0,75 kWweight of the machine ca.: 130 kgdimensions of the machine ca.: 1,1 x 0,5 x 1,3 mFlanging machine is equipped with:- Emergency switch- Footswitch- 7 pcs. Roll setsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 1015 mmmaterial thickness: 1 mmspeed: von Hand weight: 240 Kgdimensions: 1420 x 600 x 750 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 3 mmdistance between columns: 1100 mmback stop - adjustable: 600 mmconnected load: 3 kWweight of the machine ca.: 1,1 tdimensions: 1,7 x 2,1 x 1,3 mThe machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,5 mmroll diameter: 98 mmthroat: 160 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 550x1400x1500 mDelivered with:• manual version• 4 set of wheels• Foot control• Brake motor• Emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mmplate thickness: 4 mmdistance between columns: 2100 mmdiameter of upper rolls: 140 mmtotal power requirement: KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mmplate thickness: 3,0 mmdistance between columns: 1300 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,35 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.