sheet metal working used for sale (3,306)

weight max.: 40 tworkpiece diameter: 150 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mmplate thickness: 2,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 76 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,8 x 0,8 x 1,3 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Upper and lower roller driven, feed roller without drive- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 tworkpiece diameter: 500 - 3800 mmdrum diameter: 350 x 150 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 tworkpiece diameter: 150 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 tworkpiece diameter: 500 - 3800 mmdrum diameter: 350 x 150 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,5 kWweight of the machine ca.: ca. 1,8 tDimensions (LxWxH): 2,2 x 2,7 x 0,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1380 mmworkpiece height: 70 mm: total power requirement: 45 kWweight of the machine ca.: 5.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,6 mm: 4 tblade length: 156 mmangle adjustable from - to: fest Gradtable surface area: 450m x 305 mmtotal power requirement: Handbetrieb kWweight of the machine ca.: 95 KgDimensions (LxWxH): 530 x 380 x 480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 3 mmdistance between columns: 2100 mmback stop - adjustable: 600 mmconnected load: kWweight of the machine ca.: 1,1 tdimensions: 2,7 x 2,1 x 1,4 mThe machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 305 mmmaterial thickness: 1,0 mmspeed: von Hand weight: 45 Kgdimensions: 500 x 340 x 420 mCombined sheet metal working machine with:- Bending, tool widths 25 - 50 - 75 - 75 - 105 mm.- Rolls, roll diameter 38 mm- scissors, max. 1015 x 1mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 30 x 8 mmsquare edge steel: 12 mmround bar steel: 15 mmweight: 0,025 t: 51 x 31 x 22 cmdimensions: 135 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mmplate thickness: 2,0 mmdistance between columns: 1300 mmdaylight opening: 48 mm: 135 °total power requirement: Handbetrieben weight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,9 x 1,2 mSegment-bending machineSegment widths:25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 35 (600) mm: 35 (900) mmL-beam: 50 x 50 x 5 (800) mmT - beam - web outwards: 60 x 7 (600) mmAxis diameter: 50 mmwork speed: 4,5 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,1 x 0,8 x 1,5 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mmplate thickness: 8,0 mmdistance between columns: 1070 mmdiameter of upper rolls: 150 mmpre-bending capacity: 6,o mmconnected load: 4,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,6 x 0,65 x 1,1 mm- Electrically adjustable rear roller- Electrically adjustable lower roll (material clamping)- Digital readout for rear roller movement- Digital readout for lower roll movement (material clamping)- Hardened rolls- Conical rolling- Swiveling top roll- Brake motor- Emergency stop- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tno. of strokes: 40 - 120 Hub/minsheet width: mmtotal power requirement: 40 kWPressing capacity 160 tonTable clamping area 1,100 x 1,280 mmRam clamping area 850 x 890 mmDistance between guides 1,120 mmDistance between columns (below guide ways) 1,350 mmDistance between Table and ram in upper position approx. 400 mmNo. of strokes 40 - 120 /minAdjustment of stoke 67 / 115 / 160 mmRam adjustment, motor driven 125 mmEjector travel 50 mmTotal electrical load, approx. 40 kW - 500 V - 50 HzWeight, approx. 24,000 kgAccessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubrication. Hyd ...

: 35 mm: 35 mmbar material dia. max.: 70 x 2 mmrectangle: 60 x 60 x 3 mmflat steel: 60 x 10 mmAxis diameter: 50 mmwork speed: 4,3 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 0,9 x 0,95 x 1,4 mProfile bending machine with:- Foot pedal right/left rotation- Hardened special steel shafts- 1 set of standard rollers- 2 rollers are drivenThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24236 Specifications: - max. working width 2550 mm - max. cutting capacity St 40 4.0 mm - Cutting angle 1.30 ° - Positioning-controlled back gauge 20 - 750 mm - Front angle stop + support arms - E. footswitch - Stroke rate up to 34 rpm depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including back gauge, without front support arms -ca. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg

Key data: 1250 mm

Exhibition machine (unused) Working width 1,250mm Bending capacity steel : 1.25 (400N/mm2) Bending angle max. 135 degrees

Brand new Schechtl segment bending machine Sheet width: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.8 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle: 150 mm

Max. punching force: 50 kN Stroke actuation via footswitch

Max. sheet thickness: 2 mm steel Max. blank diameter: 1000 mm Motorized drive via foot switch

Punching capacity: 165 kNworking area: 2070 x 1280 mmplate thickness: 6,4 mmcontrol: CC 220 workpiece weight: 150 kgpunch diameter: 76,2 mm: 80 m/min: 55 m/minweight of the machine ca.: 8000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3050 mmtable width: 1530 mmburner heads: 1 stroke: 290 mmspeed: 120 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2,5 mmbending angle max.: 135 °stroke of upper beam: 25 mmweight of the machine ca.: 285 kgdimensions of the machine ca.: 1,35 x 0,85 x 1,20 m PRICE: 2.045,-- EUR - with an oblique segmented upper cheek- distribution segment: 25-30-35-40-45-50-75-100-150-200-270- done with the foot brake applicationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-20 mmwall strength: 2 mmbending radius min.: 10 mmbending radius max.: 75 mmbending speed: 35 mm/minpull up length of tube: 2000 mmControl: total power requirement: 7,5 kWweight of the machine ca.: 1,1 tdimensions: ca. 3100x1000x1400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: . tsquare measurement: 55 mmdiameter: 63 mmflat material: 170x20 mmtotal power requirement: kWweight of the machine ca.: tThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Stepless cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Footswitch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1100 kg

Key data: 3020 mm, 2 mm

with motor backgauge, numerical NC control, manual bending beam lowering, foot switch Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3020 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 3.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: green Total power requirement: 400 V Dimensions: 3800 x 1000 mm Machine weight: 4500 kg Upper beam stroke: 200 mm without roller scissors/ Opening width: 200 mm

Key data: 2500 mm, 2 mm

with foot switch, with simple control up to 6 bending angles, potentiometer preset, manual bending beam lowering, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2500 mm Sheet thickness steel: 2.5 mm without backgauge Colour: green Total power requirement: 16 A Space requirement: approx. 3400 x 1000 x 1600 mm Machine weight: 2000 kg without roller scissors Bending angle: 145 degrees Machine Number: 50/3

sheet width: 3050 mmplate thickness: 13 mmweight of the machine ca.: 8 tdistance between columns: mmtotal power requirement: kWdimensions of the machine ca.: mmotorized limit stopcutting crack adjustmentcutting angle adjustmentfoot switchTechnische Daten / technical details:Schnittlänge / max. cutting length 3050 mmSchnittleistung / cutting capacity 13 mmHinteranschlag / limit stop 1000 mmAntriebsleistung Motor/ drive capacity motor 22 kWGewicht der Maschine ca. / weight 8000 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4 mm, 1500 kg

Fasti Beading Machine Size 4 150x 4mm Power max projection 500mm hydr. Feeding of the upper roller by foot switch Right-left rotation Nkebmd R E Ijv Tqy Njgsw Stepless speed adjustment by handwheel Holder 60mm Weight approx. 1500kg with accessories Built in 1963 Space requirement approx. 1000x1000x1750mm