sheet metal working used for sale (3,304)

A Trumpf CNC laser cutting machine is offered. Working area X/Y: 3000mm/1500mm, Z-axis travel: 115mm, laser power: 5000W, max. material thickness steel/stainless steel/aluminum: 25mm/20mm/12mm, operating hours: approx. 35000h, laser operating hours: approx. 13000h. The following components were replaced: E/R module in 2024, power tube in 2020 and blower turbine in 2016. Overall dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12t. An on-site inspection is possible.

Beading machine, flanging machine, seam closing machine, motorized beading machine -Max. sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Protrusion: 50 mm -Dimensions: 900/800/H1100 mm -Weight: 250 kg

Offer 26209 Technical data: - Max. working width 1020 mm - Max. material thickness 2.5 mm - Cutting angle 2.4 ° - Stroke rate up to 34 1/min - Manual backgauge with digital position indicator 500 mm - Table height 850 mm - Front angle stop - Front pull-out material support - Pneumatically supported sheet metal hold-up with sheet metal removal to the front - E-footswitch - Typing - Single stroke pre-selectable - Rear protection grille - Mounted on steel plate - Pneumatic connection 6 bar - Drive 400 V / 3 kW - Space requirement approx. W 2100 x H 1150 x D 2200 mm - Weight approx. 1400 kg

Offer 23220 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle hydr. adjustable 0.3 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 17 pcs - Engine backgauge 20 - 700 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 15 kW - Table height approx. 900 mm - Space required including back gauge, without front support arms - approx. W 3700 x H 1850 x D 2250 mm - Weight approx. 5800 kg - with: - E-foot switch - Cutting line illumination - - Cutting length preselection via potentiometer - Rear of the machine with light barrier safety

Offer 22655 Technical data: - 2 motor-driven + 2 x running units - Load capacity 20000 kg - Roll diameter approx. 400 mm - Roll width 150 mm - Overall height 500 mm - Drive 400 V - Space requirement with drive approx. W 800 x H 500 x D 900 mm - Space requirement without drive approx. W 250 x H 500 x D 620 mm - Weight approx. 1200 kg - Without electrical control unit / control cabinet

A Trumpf CNC punching machine is offered. Max. punching force: 180kN, working range X/Y: 2500mm/1250mm, max. sheet thickness: 6.4mm, max. workpiece weight: 160kg, max. punching diameter: 76.2mm, axis speed: approx. 100m/s, max. punching stroke rate: approx. 1000 strokes/min, max. marking stroke rate: approx. 2500 strokes/min, tool magazine: 18, clamps: 2, max. part size X/Y: 500mm/500mm, operating hours: 22146h. Including tool cassettes, various punches and dies, a MultiTool, and Easy Type. Weight: approx. 9.8t, machine dimensions X/Y/Z: approx. 6500mm/6203mm/2252mm. Documentation available. An on-site inspection is possible.

diameter: - mmworkpiece length: - mmwork piece width: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: div mmsquare edge steel: div mmL-beam: div mmNo. 2984:1 used plate, profile and bar shear with notcher 50 tomanufactured by PEDDINGHAUS, type 210 / 13 Standard, built 1965No. 3418:1 used combined section shear 80 tonnesmanufactured by PEDDINGHAUS, type 210 Super 16, built ca85Cuonnbjt0aNo. 3668:1 used steel section shear + punching machine 95 toPEDDINGHAUS, type 210 Super 20, year of construction 1978Space requirement 2.20 x 1.00 x 2.35 m, weight approx. 4.5 tonnesNo. 3286:1 used steel profile shear 65 toMUBEA / MUHR & BENDER, type KBL 16 NNo. 10961 used hole punch 26 toEDEL SMO 26, various accessoriesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1250 mm, 1 mm

Qty. 1 Second-hand cut-to-length line including straightening, polishing and grinding units Manufacturer: UNGERER / GEORG, EMG, IMEAS Built: 1986 / 1997 /1998 / 2009 still in operation Material: stainless steel Strip width: 500 – 1.250 mm Thickness: 0.40 – 1.00 mm Coil weight – DECOILER max.: 10.0 t RECOILER max.: 5.0 t Coil ID – Ø 500 mm OD – Ø 1.500 mm Sheet length: 500 – 6.000 mm Stacking weight max.: 4.000 kg Working speed – grinding max. 20 m/min. Working speed – grinding + brushing: 4 – 12 m/min. Working speed – brushing: 4 – 6 m/min. Working speed – cutting max.: 20 m/min. Working direction right ⇒ left Length tolerance ± 0.40 – 3.000 mm

Plasma cutting machine Satronik D300 BJ 1997

Separating tool, punching tool, punch, punch die, punch stamp, -Stamping tool: Die holder with fine adjustment -Bore: Ø 25 mm -Dimensions: see photos -Dimensions: 300/250/H210 mm -Weight: 32.1 kg

Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic -Cutting width: 2580 mm -Maximum cutting thickness: Steel 2 mm / Aluminum 3 mm -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3020/2000/1320 mm -Weight: 3185 kg

guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg

Separating tool, punching tool, punch, punch die, punch stamp, -Punch tool: for holding dies -Hole: Ø 100/43 mm -Dimensions: see photos -Dimensions: 345/280/H245 mm -Weight: 55.9 kg

Cutting blades, replacement blades for guillotine shears, replacement cutting edges, cutting knives, shear blades, flat steel blades for profile steel shears, lever shears, sheet metal knives -Manufacturer: Peddinghaus, 2 cutting blades for profile steel shears 210/16 -Cutting length: 229 mm -Hole spacing: 140 mm / M18 see photos -Submission/Price: complete -Dimensions: 260/18/H70 mm -Weight: 2.4 kg

This 4-axis PLACKE QPB-4 150/3100 was manufactured in 2001. It features a press force of 1500 kN and a bending length of 3100 mm, making it suitable for various bending applications. The machine includes a mechanical crowning system and comes with a comprehensive set of tooling and accessories. If you are looking to get high-quality bending capabilities, consider the PLACKE QPB-4 150/3100 press brake we have for sale. Contact us for further details.

This 3-axis GWEIKE LF3015GA was manufactured in 2019. It features a powerful 3000 W laser and a generous working area of 3000 x 1500 mm, capable of cutting up to 20 mm steel and 12 mm stainless steel. The machine includes a robust exchange table and has a maximum moving speed of 120 m/min. If you are looking to get high-quality cutting capabilities, consider the GWEIKE LF3015GA fiber laser cutting machine we have for sale. Contact us for further details.

Knife length: 130 x 130 mm Cutting length: 130 mm max. cutting capacity at 45/70 kg strength: 3/2 mm Cutting angle: 90° Stroke rate: 50 /min Table dimensions: 460 x 600 mm Space requirement: 650 x 600 x 1250 mm Weight approx.: 170 kg

Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch stamp -Manufacturer: Mubea, shearing tool for square steel / round steel -Item No.: 0502805202 -Square steel: 27x27 mm / 50x50 mm -Round steel: Ø 31/56 mm -Number: 2x shearing tools available -Price: per piece -Dimensions: 185/185/H40 mm -Weight: 8.8 kg/pc.

Separating tool, punching tool, punch, punch die, punch stamp, stripper -Manufacturer: Mubea, scraper 4 pieces -Size: 10/15/30/40 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 150/110/H60 mm -Weight: 6.1 kg

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, notching unit -Dimensions: see photos -Dimensions: 150/130/H80 mm -Weight: 4.4 kg

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, counter blade only, without notching unit -Hole spacing: 200/150 x Ø 18 mm -Dimensions: 255/200/H100 mm -Weight: 14 kg

Separating tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, die-cutting tool intermediate block -Dimensions: see photos -Dimensions: 310/17/H110 mm -Weight: 22.6 kg

Separating tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, die-cutting tool for holding dies -Bore: Ø 73 mm / Mounting Ø 90 mm / Hole spacing 90/75 mm M10 -Dimensions: see photos -Dimensions: 200/100/H120 mm -Weight: 6.8 kg

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Mubea, die-cutting tool for holding dies -Hole: Ø 35 mm -Dimensions: see photos -Dimensions: 235/105/H130 mm -Weight: 11.1 kg

sheet width - max.: 0240 mmcoil weight: 0,150 tcoil internal dia.: 320 - 520 mmcoil outside - diam. ca.: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m• Motor drive• Rear limit disc• Front limit ring• Switch-on delay adjustable via potentiometer• Manually adjustable brake• Loop control via contact switch on the reel baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0150 mmcoil weight: 0,150 tcoil internal dia.: 230 - 545 mmcoil outside - diam. ca.: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m• Motor drive• Rear limit disc• Front limit ring• Left/right rotation selector switch• Manual/automatic mode• Loop control via contact switch on the reel baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1020 mm, 6 mm

Max. sheet thickness: 6 mm steel Upper roller diameter: 150 mm Motorized rear roll infeed Clockwise and counterclockwise rotation via footswitch Safety rope pull switch Conical rounds possible Weight: 1200 kg

Key data: 2540 mm, 6 mm

Max. cutting length: 2540 mm Max. sheet thickness: 6 mm steel Motorized adjustable back gauge (2 speeds) up to 1000 mm with analogue display Side stop and table extensions Cutting length limitation Cut edge lighting Knife sharpened Weight approx. 5500 kg

Manual beveling line for round tubes and bars 4-spindle deburring and chamfering machine For interior and exterior taping/chamfering Spindle speeds 70/140 rpm Material: steel, stainless steel, aluminium, non-ferrous Diameter: Ø 2 – 75 mm Min. workpiece length from 100 mm Deburring time: 3–4 sec. / front side The machine is equipped with deburring tools from the manufacturer Kopal. Tool holder is MK3 The deburring tools are adjustable so that the same chamfer depth is always achieved. Very good condition