We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (2)
- 3-Roller Round Bending Machines (10)
- Axis Laser Processing Equipment (5)
- Beading Machines (14)
- Bending And Straightening Machines (1)
- Bending Machines (67)
- Bending Tools (61)
- Blanking Presses For Sheet Metal (1)
- Circular Shears (12)
- CNC Bending Machines (7)
- CNC Hydraulic Plate Shear (14)
- CNC Laser Cutting Machines (138)
- CNC Plasma Cutting Machines (29)
- CNC Pressbrakes (127)
- CNC Punching Machines (25)
- CNC Punching Nibbling Machines (7)
- CO2 Laser Marker (3)
- Combination Machines (4)
- Combined Punching, Nibbling, Forming And Beam Cutting Machines (7)
- Concrete Bar Bending Machines (1)
- Container Rotating Devices (14)
- Coper-Notcher With Punch For Profiled Materials (8)
- Coper-Notcher With Punch For Sheet Metal (1)
- Cutting off machines (1)
- Cutting-To-Length Lines (14)
- Deburring Machines (12)
- Decoilers (41)
- Feed Straighteners (3)
- Flame Cutting Units (4)
- Flanging Machines (6)
- Flat, Bar And Section Shears (7)
- Folding Machines (155)
- Guillotine Shears (96)
- Hand Lever Shears (5)
- Hand Plate Shear (3)
- Hole Punches (39)
- Hydraulic Shear (133)
- Ingot, Billet And Slab Shears (1)
- Laser And Plasma Cutting Centres (1)
- Laser Cutting Machines (65)
- Laser Cutting Presses (1)
- Laser engraving machines (6)
- Laser gas cutting installations (3)
- Laser Machines (9)
- Longitudinal Cutting Lines (20)
- Longitudinal cutting machines (2)
- Mandrel Bending Machines (3)
- Mandrel Pipe Bending Machines (9)
- Metal spinning machines (5)
- Motorized Beading Machines (11)
- Motorized Plate Bending Machines (82)
- Motorized Shears (22)
- Nibbling And Curve Cutting Shears (1)
- Nibbling Machines (6)
- Notching Machines (58)
- Other Combined Sheet Metal Working Machines (3)
- Other Metal Forming Machines (2)
- Other Sheet Metal Working Shears (2)
- Other Wire Working Machines (1)
- Pipe Bending Machines (4)
- Pipe Drawing Machines (1)
- Pipe Manufacturing Machines (7)
- Plasma Cutters (11)
- Plasma Cutting Machines (27)
- Plate And Section Shears (1)
- Plate Edge Pre-Bending Machines (3)
- Profile Bending Machines (41)
- Profile Steel Cutters (49)
- Profiling Machines (11)
- Profiling Systems (12)
- Punches (5)
- Punching Machines (47)
- Recoilers (4)
- Reel Straightening Units (2)
- Reels (6)
- Ring Bending Machines (10)
- Roll Bending Machines (6)
- Round Bending Machines (52)
- Section round bending machines (2)
- Shears For Profiled Materials (1)
- Shears For Sheet Metal Working (5)
- Sheet Metal Bending Machines (21)
- Sheet metal blowroom machines (15)
- Sheet Metal Clamp (1)
- Sheet metal cutting machines (3)
- Sheet Metal Deburring Machines (16)
- Sheet Metal Die (3)
- Sheet Metal Machining Centres (20)
- Sheet Metal Punching, Nibbling And Forming Machines (4)
- Sheet Metal Shears (12)
- Sheet Metal Straightening Machine (2)
- Sheet Notching Machines (3)
- Sheet Strip Feed Leveler (8)
- Smooth planer (1)
- Special Purpose Machines Built Up From Units For Metal Cutting Operations (1)
- Special Purpose Sheet Metal Forming Machines (1)
- Straighteners (11)
- Tape Straightening Machines (16)
- Three-roll plate bending machines (12)
- Tube Bending Machines (52)
- Universal CNC Bending Machines (3)
- Universal Lockforming (1)
- Volume bending machines (2)
- Water Jet Cutting Machines (22)
- Wire And Strip Working Machines (3)
- more
- A+B (1)
- A+B ERBEND (1)
- ABBEY (1)
- ABS (1)
- ABWICKELHASPEL (1)
- ACCURL (2)
- ACD (1)
- ACF (2)
- ACHENBACH (1)
- ADIGE (3)
- ADIGE BLM (1)
- ADIRA (2)
- AGIE CHARMILLES (1)
- AJAN (5)
- AK BEND (18)
- AK-BEND (29)
- AKYAPAK (6)
- ALBA (1)
- ALFRA (1)
- ALMI (7)
- ALMORE (1)
- ALPHA LASER (1)
- ALU (1)
- AMADA (53)
- AMADA PROMECAM (5)
- AMF SPANNTECHNIK (1)
- AMG (1)
- AMGA (1)
- AMOB (2)
- AMT (1)
- Apfel (14)
- aps (3)
- ARKU (6)
- ARYMA (1)
- ASSERVIMENTI (1)
- ATLANTIC (16)
- ATS (4)
- AUTOMATIC (1)
- AWEA (1)
- B+S GROUP (1)
- BAIWEI (1)
- BALLIU (2)
- BAUBLYS (1)
- BAUER (1)
- BAYKAL (25)
- BAZHOU (1)
- BBM (1)
- BEHRINGER (1)
- BELGIUS (1)
- BEMA (1)
- BENDMAK (1)
- Bernardo (23)
- BERNARDO, PWA HANDELS GES (1)
- BETSCHKE WEGERHOFF (1)
- Beyeler (6)
- Biegemaster (5)
- BIELOMATIK (1)
- Bihler (2)
- BLEMAS (3)
- BLM (4)
- BLM Adige (3)
- BLM-ADIGE (1)
- BODOR (6)
- BOLDRINI (3)
- BOLLINA (1)
- BOMBLED (1)
- BORTOLIN KEMO (1)
- BOSCHERT (23)
- BOSCHERT GIZELIS (1)
- BPR (1)
- Braun (3)
- BRAUN HIMMEL (1)
- BRAUN MAIER (1)
- BRONSWERK (2)
- BRONX (1)
- BRUDERER (1)
- BUCK (1)
- BURNET (4)
- BWM (3)
- BWRM (2)
- BÜLTMANN (1)
- Bystronic (61)
- BYSTRONIC BEYELER (1)
- BöLLHOFF (1)
- CABYCAL (1)
- CAMU (1)
- CARL KNEUSEL (1)
- CEVISA (2)
- cewe (7)
- CHESTERMAN (1)
- CHIRON CNC-FERTIGUNGSZENTRUM (1)
- CIDAN (7)
- CINCINNATI (1)
- CISAM IMPIANTI (1)
- CMS (3)
- CMS Tecnocut (2)
- CMU (1)
- CoastOne (15)
- Coiltec (3)
- COLGAR (3)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
subcategories
(3rd category level)
CNC Pressbrakes 127
Decoilers 41
Folding Machines 155
Hole Punches 39
Hydraulic Shear 133
Punches 5
Reels 6
more 1471
Manufacturer:
(Category: 107)
A+B 1
ABBEY 1
ABS 1
ACCURL 2
ACD 1
ACF 2
ADIGE 3
ADIRA 2
AJAN 5
AK BEND 18
AK-BEND 29
AKYAPAK 6
ALBA 1
ALFRA 1
ALMI 7
ALMORE 1
ALU 1
AMADA 53
AMG 1
AMGA 1
AMOB 2
AMT 1
Apfel 14
aps 3
ARKU 6
ARYMA 1
ATLANTIC 16
ATS 4
AWEA 1
BAIWEI 1
BALLIU 2
BAUBLYS 1
BAUER 1
BAYKAL 25
BAZHOU 1
BBM 1
BELGIUS 1
BEMA 1
BENDMAK 1
Bernardo 23
Beyeler 6
Bihler 2
BLEMAS 3
BLM 4
BODOR 6
BOLDRINI 3
BOLLINA 1
BOMBLED 1
BOSCHERT 23
BPR 1
Braun 3
BRONX 1
BRUDERER 1
BUCK 1
BURNET 4
BWM 3
BWRM 2
BÜLTMANN 1
Bystronic 61
BöLLHOFF 1
CABYCAL 1
CAMU 1
CEVISA 2
cewe 7
CIDAN 7
CMS 3
CMU 1
CoastOne 15
Coiltec 3
COLGAR 3
COLLY 1
COMAC 2
COMACA 4
COMESSA 1
CORMAK 1
CORNO 1
COSTA 1
CSM 1
CUTLITE 1
DAI HYUN 1
DALMEC 1
DAMAMT 1
DANOBAT 2
DARLEY 11
DAVI 6
DENER 4
DERATECH 1
DESTACO 1
DIGEP 2
Dimeco 2
DMF 1
DMG 3
DOLAST 1
DONEWELL 2
Dreher 5
Dräco 3
DUMETA 16
DURMA 69
DYNOBEND 2
EAGLE 3
ECKERT 14
ECKOLD 67
Eclair 2
EDEL 12
EHT 21
EIGL 1
ELECTROX 1
ELMEA 1
Elumatec 7
EMMEGI 1
ERBEND 10
ERCOLINA 23
ERMAK 44
Ermaksan 4
ERNST 2
ESAB 9
ESPE 1
EUEN 1
EURAM 22
Euromac 10
EVERS 1
EXPERT 1
FACCIN 22
FAGOR 1
FALCON 1
FALKEN 11
Farina 2
FARROS 1
Fasti 66
FEMAS 1
FIBRO 3
FICEP 1
FIM 1
FIMI 2
FINTEK 1
FISCHER 5
FLADDER 1
Flow 4
FOBA 2
FOMP 1
FORMAT 1
Forstner 2
FRAMECAD 3
FRECH 1
FRÖHLING 1
FUJICAR 1
G-WEIKE 1
GABELLA 2
GABRO 1
GADE 1
approved
dealer
dealer
A hydraulic AMADA NC guillotine shear is offered. Cutting length: approx. 3050mm, max. sheet thickness: approx. 6mm, min./max. cutting angle: approx. 0.4°/2.2°, backgauge travel: approx. 1000mm, backgauge traverse speed: 100mm/s, max. stroke: approx. 160mm, max. stroke rate: 45strokes/min, control: AMADA NC control. Including sheet handling system. Machine dimensions X/Y/Z: approx. 3800mm/2250mm/2100mm, weight: approx. 6500kg. Inspection by appointment possible.
approved
dealer
dealer
Key data: 5 t, 350 mm, 310 mm
Small Electric Table Press Brake with Spindle Drive TableOne 5 - CoastOne Made in Finland Press force: 5T Bending Length: 350mm Spindles: 1x5T Control: TC15-2D Graphics Back gauge: 1 axis controlled X axis - R axis manual Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; Available now! Viewing under power possible at any time by appointment!
approved
dealer
dealer
Dimensions: 675 x 635 x 1200 mm Color: Blue Total power requirement: 230 V 7 1.5 kW Speed m/min.: 12 m/min Weight: 250 kg Origin: Germany Material tension: min. 170 mm long, up to max. 60 mm width, 5 - 15 mm thickness Machine Number: CW1005
approved
dealer
dealer
Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, Container rotating device, Welding rotating device type H 02.5 -Load capacity: kg -Roller spacing: 600 - 1670 mm -Rollers: Ø 320 x 950 mm -Rolling speed: 0.15 to 1.35 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 1150/1105/H550 mm / 1100/600/H550 mm -Weight: 607 kg / 365 kg
approved
dealer
dealer
Trumpf TruLaser 3040Year of manuf. : 2021 Movement X/Y/Z : 4000/2000/116 mmPower : 4 kW____________Description:Standard equipmentWorking area:4000 × 2000 mmControl cabinets:IntegratedDrive technology:Gantry combined with linear direct drivesWaste removal:Longitudinal conveyor beltPositioning laser diode:IncludedSpray system:IncludedAutomatic nozzle cleaning:IncludedFeatures:- NitroLine:- AdjustLine:- ControlLine:- FlyLine:- FocusLine:- FastLine:- PierceLine:- Brass cutting set:- Copper cutting setLaser TruDisk 4001:- Power 4 kW:- BrightLine Fiber:- High-Speed Cutting Package:- Power Package for Fusion CuttingAdditional machine functions:- Drop&Cut:- Integrated camera 1 for process monitoringAdditional cutting packages:- High-speed Eco cutting package:- Pneumatic cuttingTechnical specificationsSimultaneous operation:170 m/minAverage positioning deviation (Ps):0.03 mmPositioning dev ...
approved
dealer
dealer
Plate rolling machine manufactured in 2000. This FASTI 136-20-4.5 features a capacity of 2040 x 4.5 mm at 400 N/mm² tensile strength and weighs 2110 kg. It is equipped with a Fasti-Matik 5 R control unit and operates at 400 V. If you are looking to get high-quality plate rolling capabilities, consider the FASTI 136-20-4.5 machine we have for sale. Contact us for further details.
approved
dealer
dealer
Offer 25475 Man. Double unwinding & uncoiling reel Technical data: - Coil weight left + right up to approx. 1 t - Coil width up to approx. 300 mm - Coil inner diameter of approx. 380 to 500 mm - Coil outer diameter up to approx. 1250 mm - Mandrel height approx. 750 mm - Space requirement approx. W 1250 x D 900 x H 1300 mm - Weight approx. 200 kg
approved
dealer
dealer
Combined hole punching, profile steel shears, notching machine, sheet metal cutting machine Manufacturer: Peddinghaus Type Peddimaster 60/100 Cuts: Round steel 45 mm Square steel 40 mm Angle steel 120 x 13 mm Flat steel 500 x 12 mm Projection 510 mm Cutting area 500 x 12 or 400 x 16 mm Punching diameter 27 in 17 mm Punching diameter 39 in 12 mm Machine weight approx. 2,400kg
approved
dealer
dealer
A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible.
approved
dealer
dealer
Offered is a RAS guillotine shear. Cutting length: 4040mm, max. steel sheet thickness: 5mm, backgauge range: approx. 5mm-1000mm, cutting angle: approx. 1.0°, stroke rate: approx. 28-46strokes/min, control system: RAS System 2005, weight: approx. 9200kg. Inspection by appointment possible.
approved
dealer
dealer
Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part rem ...
approved
dealer
dealer
Key data: 220 kN, 8 mm, 3050 mm
Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part rem ...
approved
dealer
dealer
Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part rem ...
approved
dealer
dealer
Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part rem ...
approved
dealer
dealer
Offer 26172 Technical data: - Brush diameter approx. 250 mm - Brush width up to approx. 55 mm - 2 Disc speed - Drive 400 V - Working height approx. 850 mm - Space requirement approx. W 650 x H 1300 x D 500 mm - Weight approx. 85 kg
approved
dealer
dealer
Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heaters, Container Rotating Device, Welding Rotating Device -Drive motor: 0.27/2.7 kW -Load capacity: 120,000 kg -Roller spacing: 660 - 3070 mm -Rollers: Ø 600 mm -Rolling speed: 0.006 to 3 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 1250/4550/H1010 mm, 1040/3960/H1010mm, 560/1240/H480 mm -Weight: 9280 kg
approved
dealer
dealer
A BPR ring bending machine is available. Shaft diameter: 40mm, max. roller diameter: 162mm, center distance: 300mm, shaft speed: 7.5rpm, max. flat steel bending capacity: 100mm/15mm, max. edgewise steel bending capacity: 60mm/10mm, max. bending diameter: 35mm, machine dimensions X/Y/Z: approx. 950mm/650mm/1400mm, weight: approx. 500kg. An on-site inspection is possible.
approved
dealer
dealer
Automatic feed via Elgo control 255 For mounting on any Elumatec single-head saw (right) Max. feed length: 3000 m
approved
dealer
dealer
Max. knife length: 200 mm Max. sheet thickness: 4 mm steel Adjustable angle between 30° and 135° Selectable between hand and foot control Weight: approx. 1000 kg
approved
dealer
dealer
Offer 26174 Technical data: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Wall thickness up to 3.25 mm - Max. bending radius 180 mm - Bending speed 20 °/sec. - Drive 400 V / 2.4 kW - Space requirement approx. W 6200 x H 1200 x D 1000 mm - Weight approx. 1100 kg - Operating hours read 972 h -with - Digital bending angle display + bending angle fine adjustment - With control SIEMENS SIMATEC Touch Panel - Mandrel bending device 4.5 m. with hydr. Withdrawal - Sawing unit - Deburring unit for internal and external deburring - Pipe positioning system - Bending tools without mandrels - 6 ,8 , 10 , 12 , 16 , 20 , 22 , 28 , 30 mm , - Partly possibly incomplete
approved
dealer
dealer
A roll forming line by Instytut Obróbki Plastycznej (Poland) for plastic metal forming is available. Roll stations: 12, shaft diameter: 50mm, max. profile width: 300mm, max. profile thickness: 2mm, overall system dimensions X/Y: approx. 20m/4m. Including an automatic cut-off unit with an incremental length measuring system and a payoff reel. An on-site inspection is possible.
approved
dealer
dealer
Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heaters, Container Rotating Device, Welding Rotating Device -Drive motor: -Load capacity: 14,000 kg -Roller spacing: 440 - 1800 mm -Rollers: Ø 400 mm / 400/60-305Z -Rolling speed: 0.3 to 1.6 m/min Right/Left rotation -Control unit: with hand control and foot switch -Individual components: see photos -Transport dimensions: 2930/12170/H645 mm / 2620/840/H620 mm -Weight: 1800 kg / 1150 kg
CNC Fiber Laser Cutting Machine with Manual Changing Table Technical data: Working area: 3000 x 1500 mm Number of cutting heads: 1 Control: CNC control system Maximum workpiece weight: 900 kg Travel speed: up to 91 m/min Machine weight: approx. 4980 kg Space requirement (L x W x H): approx. 5562 x 2270 x 2388 mm Equipment: BodorPower fiber laser source with 12 kW power Bodor Genius laser cutting head with automatic focus control Bodor Thinker 3.0 machine control Highly stable machine bed in tenon and tenon hole design Servo motors and drive technology from Bodor Nitrogen control valve for precise gas control Bodor Lightning technology for fast and efficient punctures Automatic residual material nesting for optimal material utilization 21.5 inch touch screen monitor Automatic adjustment of cutting gas pressure Active anti-collision protection Intel ...
approved
dealer
dealer
Max. feed length: 3000 mm Sled can be folded up Manual Moving Extension on the right 2 height-adjustable feet Plastic rollers
approved
dealer
dealer
Key data: 2540 mm, 2 mm
Max. bending length: 2540 mm Max. sheet thickness: 2.5 mm steel Motor-controlled back gauge with folding cams up to 1500 mm Multiple program sequences with different bending angles and lifting heights possible Multibend 2000 controller Bending rail ground Weight: 1,700 kg
Key data: 3000 mm, 6 mm
The dimensions of the machine are LxWxH 2000mm x 3800mm x 1400mm. The weight is approx. 3500kg. The machine is in a little-used condition.
Key data: 100 t, 2550 mm
The dimensions of the machine are LxWxH 2000mm x 3400mm x 2850mm. The weight is 7400kg. The machine is in a little-used condition.
approved
dealer
dealer
Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 320 - 915 mm -Rollers: Ø 190 x 100 mm -Load capacity: kg -Submission/Price: complete -Transport dimensions: 1000/435/H240 mm -Weight: 70 kg
approved
dealer
dealer
CNC punch press manufactured in 1998. This AMADA Vipros 358 King features a maximum workpiece length of 4,000 mm and a maximum workpiece width of 1,270 mm. It offers a punching force of 300 kN and a maximum stroke of 40 mm. If you are looking to get high-quality punching capabilities, consider the AMADA Vipros 358 King machine we have for sale. Contact us for further details.
approved
dealer
dealer
Offer 26153 Technical data: - Max. projection 200 mm - Roller center distance 50 mm - Max. material thickness at 40 kg/mm² strength 1.25 mm - Space requirement approx. W 300 x H 1150 x D 500 mm - Weight approx. 25 kg - Various corrugated rollers
