We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (6)
- 3-Roller Round Bending Machines (11)
- Axis Laser Processing Equipment (5)
- Beading Machines (11)
- Bending And Straightening Machines (1)
- Bending Machines (54)
- Bending Tools (53)
- Blanking Presses For Sheet Metal (1)
- Circular Shears (12)
- CNC Bending Machines (8)
- CNC Hydraulic Plate Shear (19)
- CNC Laser Cutting Machines (140)
- CNC Plasma Cutting Machines (29)
- CNC Pressbrakes (137)
- CNC Punching Machines (25)
- CNC Punching Nibbling Machines (10)
- CO2 Laser Marker (5)
- Combination Machines (1)
- Combined Punching, Nibbling, Forming And Beam Cutting Machines (6)
- Concrete Bar Bending Machines (1)
- Container Rotating Devices (16)
- Coper-Notcher With Punch For Profiled Materials (7)
- Coper-Notcher With Punch For Sheet Metal (1)
- Cutting off machines (1)
- Cutting-To-Length Lines (15)
- Deburring Machines (6)
- Decoilers (44)
- Feed Straighteners (3)
- Flame Cutting Units (4)
- Flanging Machines (7)
- Flat, Bar And Section Shears (15)
- Folding Machines (168)
- Guillotine Shears (94)
- Hand Lever Shears (6)
- Hand Plate Shear (3)
- Hole Punches (37)
- Hydraulic Shear (149)
- Ingot, Billet And Slab Shears (1)
- Laser And Plasma Cutting Centres (1)
- Laser Cutting Machines (63)
- Laser engraving machines (11)
- Laser gas cutting installations (3)
- Laser Machines (9)
- Longitudinal Cutting Lines (15)
- Longitudinal cutting machines (2)
- Mandrel Bending Machines (4)
- Mandrel Pipe Bending Machines (15)
- Metal spinning machines (5)
- Motorized Beading Machines (12)
- Motorized Plate Bending Machines (66)
- Motorized Shears (24)
- Nibbling Machines (6)
- Notching Machines (58)
- Other Combined Sheet Metal Working Machines (3)
- Other Metal Forming Machines (4)
- Other Sheet Metal Working Shears (3)
- Other Wire Working Machines (1)
- Pipe Bending Machines (3)
- Pipe Manufacturing Machines (5)
- Plasma Cutters (11)
- Plasma Cutting Machines (28)
- Plate And Section Shears (3)
- Plate Edge Pre-Bending Machines (3)
- Profile Bending Machines (46)
- Profile Steel Cutters (51)
- Profiling Machines (9)
- Profiling Systems (7)
- Punches (6)
- Punching Machines (52)
- Recoilers (4)
- Reel Straightening Units (2)
- Reels (5)
- Ring Bending Machines (9)
- Roll Bending Machines (9)
- Round Bending Machines (48)
- Section round bending machines (2)
- Shears For Profiled Materials (2)
- Shears For Sheet Metal Working (6)
- Sheet Metal Bending Machines (23)
- Sheet metal blowroom machines (19)
- Sheet Metal Clamp (1)
- Sheet metal cutting machines (3)
- Sheet Metal Deburring Machines (16)
- Sheet Metal Die (2)
- Sheet Metal Machining Centres (14)
- Sheet Metal Punching, Nibbling And Forming Machines (8)
- Sheet Metal Shears (11)
- Sheet Metal Straightening Machine (3)
- Sheet Notching Machines (3)
- Sheet Strip Feed Leveler (10)
- Smooth planer (2)
- Special Purpose Machines Built Up From Units For Metal Cutting Operations (1)
- Special Purpose Sheet Metal Forming Machines (1)
- Special Purpose Sheet Metal Working Shears (1)
- Straighteners (12)
- Tape Straightening Machines (15)
- Three-roll plate bending machines (11)
- Trimming Machines (1)
- Tube Bending Machines (63)
- Universal CNC Bending Machines (4)
- Universal Lockforming (1)
- Volume bending machines (2)
- Water Jet Cutting Machines (24)
- Wire And Strip Working Machines (3)
- more
- A+B (1)
- A+B ERBEND (1)
- A+B FASTECH (1)
- ABWICKELHASPEL (1)
- ACCURL (1)
- ACD (1)
- ACF (2)
- ACHENBACH (1)
- ADIGE (1)
- ADIGE BLM (1)
- ADIRA (3)
- AGIE CHARMILLES (1)
- AGOTHA WMW (1)
- AGTOS (1)
- AJAN (2)
- AK BEND (21)
- AK-BEND (28)
- AKYAPAK (6)
- ALBA (1)
- ALFRA (1)
- ALMI (2)
- ALMORE (1)
- ALU (1)
- AMADA (45)
- AMADA PROMECAM (7)
- AMADA/LKI (1)
- AMF Spanntechnik (2)
- AMG (1)
- AMGA (1)
- AMOB (1)
- AMT (1)
- Apfel (14)
- APOLLO (1)
- aps (3)
- ARKU (10)
- ARLO (1)
- ARYMA (1)
- ASSERVIMENTI (1)
- ATLANTIC (14)
- ATS (4)
- AUTOMATIC (1)
- AWEA (1)
- AXIAL (1)
- AYEL-TECH (1)
- B+S GROUP (1)
- BACH (1)
- BALLIU (2)
- BAUBLYS (1)
- BAYKAL (19)
- BAZHOU (1)
- BBM (2)
- BEIJING YC DIGITTECH (1)
- BELGIUS (1)
- BEMA (1)
- BENDMAK (2)
- Bernardo (22)
- BERNARDO, PWA HANDELS GES (1)
- BETONSTAHLBIEGER (1)
- BETSCHKE WEGERHOFF (1)
- Beyeler (9)
- Biegemaster (8)
- BIELOMATIK (1)
- BIELSA (1)
- Bihler (2)
- BLEMAS (4)
- BLM (5)
- BLM Adige (3)
- BLM-ADIGE (1)
- BODOR (4)
- BOLDRINI (1)
- BOLLINA (1)
- BOMBLED (1)
- BOSCHERT (21)
- BOSCHERT GIZELIS (1)
- BPR CURVATRICI (1)
- Braun (3)
- BRAUN HIMMEL (1)
- BRAUN MAIER (1)
- BRONSWERK (2)
- BRONX (1)
- BUCK (1)
- BUD-MASZ (2)
- BURNET (4)
- BWM (3)
- BWRM (2)
- Bystronic (64)
- BYSTRONIC BEYELER (1)
- BöLLHOFF (1)
- CAMU (1)
- CEVISA (2)
- cewe (7)
- CHAPPUIS (1)
- CHESTERMAN (1)
- CHIESA (1)
- CHINA (1)
- CHIRON CNC-FERTIGUNGSZENTRUM (1)
- CIDAN (4)
- CINCINNATI (1)
- CISAM IMPIANTI (1)
- CMS (2)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
subcategories
(3rd category level)
CNC Pressbrakes 137
Decoilers 44
Folding Machines 168
Hole Punches 37
Hydraulic Shear 149
Punches 6
Reels 5
more 1451
Manufacturer:
(Category: 107)
A+B 1
ACCURL 1
ACD 1
ACF 2
ADIGE 1
ADIRA 3
AGTOS 1
AJAN 2
AK BEND 21
AK-BEND 28
AKYAPAK 6
ALBA 1
ALFRA 1
ALMI 2
ALMORE 1
ALU 1
AMADA 45
AMG 1
AMGA 1
AMOB 1
AMT 1
Apfel 14
APOLLO 1
aps 3
ARKU 10
ARLO 1
ARYMA 1
ATLANTIC 14
ATS 4
AWEA 1
AXIAL 1
BACH 1
BALLIU 2
BAUBLYS 1
BAYKAL 19
BAZHOU 1
BBM 2
BELGIUS 1
BEMA 1
BENDMAK 2
Bernardo 22
Beyeler 9
BIELSA 1
Bihler 2
BLEMAS 4
BLM 5
BODOR 4
BOLDRINI 1
BOLLINA 1
BOMBLED 1
BOSCHERT 21
Braun 3
BRONX 1
BUCK 1
BUD-MASZ 2
BURNET 4
BWM 3
BWRM 2
Bystronic 64
BöLLHOFF 1
CAMU 1
CEVISA 2
cewe 7
CHAPPUIS 1
CHIESA 1
CHINA 1
CIDAN 4
CMS 2
CMU 2
CoastOne 13
COIL-TEC 1
COLGAR 3
COLLY 1
COMAC 2
COMACA 2
COMESSA 1
CORMAK 1
CORNO 1
CSM 1
DAI HYUN 1
DAKO 1
DALMEC 1
DANOBAT 1
DARLEY 13
DATE 1
DAVI 5
DAVY 1
DENER 2
DERATECH 2
DESTACO 2
DIGEB 1
DIGEP 2
DIMECO 3
DMF 1
DMG 3
DOLAST 1
DONEWELL 2
Dreher 6
DRINNS 1
DUMETA 16
DURMA 69
DYNOBEND 2
EAGE 1
EAGLE 4
EBU 1
ECKERT 13
ECKOLD 38
Eclair 2
EDEL 12
EHT 25
EIGENBAU 2
EIGL 1
ELMEA 1
Elumatec 3
EMMEGI 1
EPILOG 1
ERCOLINA 13
ERMAK 49
Ermaksan 3
ERNST 2
ESAB 9
ESPE 1
EURAM 1
Euromac 10
EVERS 1
FACCIN 11
FAGOR 1
FALKEN 13
Farina 2
Fasti 58
FEMAS 1
FERMAT 1
FEYSAMA 1
FIBRO 2
FICEP 1
FIM 1
FIMI 2
FINN POWER 17
Finn-Power 11
FINTEK 8
FISCHER 6
FJELLMAN 1
Flow 5
FOBA 2
FOMP 1
FORMAT 1
FORST 1
Forstner 3
FRAMECAD 3
FUJICAR 1
G-WEIKE 1
GABELLA 2
GABRO 1
GECAM 1
GECKO 1
GEFI 1
GEKA 33
approved
dealer
dealer
Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Hoko, Lever shears, profile steel shears type HB 15 -Steel sheet: up to 10 mm -Flat/strip iron: up to 18 mm -Round steel: up to 20 mm -Sheet metal sheets: up to 6 mm -mitered: 50 x 5 Cutting capacity: see photo of the nameplate -Lift-down device: -Overall dimensions: 670/200/H1670 mm -Transport dimensions: 1340/200/H510 mm -Weight: 90 kg
approved
dealer
dealer
Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake-Tool for: press brake-Dimensions: 175 x 26 mm-Total length: 315 mm-Weight: 8 kg
approved
dealer
dealer
Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Prisms: 90° x 75 mm -Dimensions: see drawing in the photos -Dimensions: 2500/270/H175 mm -Weight: 188 kg
approved
dealer
dealer
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake, 3-piece -Total length: 143 mm / 1 x 28/45/70 mm each -Width/Height: 30 mm -Dimensions: see drawing in the photos -Weight: 0.7 kg
approved
dealer
dealer
Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat manufacturing, blind manufacturing -Profiling plant: Replacement stations for ID26309 -Profiling machine: heavy-duty design, used for manufacturing slats/blinds -bottom profiling stations: 5 pieces -Drive shaft: Ø 35mm -Dimensions: 4x 700/390/H400 mm 2x 300/200/H160 mm -Weight: 702 kg
approved
dealer
dealer
Bending tool, die, upper blade, upper tool, upper jaw, claw bar -Tool for swivel bending machine -Pointed tool -Dimensions: 45 x 120 mm -Length: 800 mm -Weight: 19 kg
approved
dealer
dealer
Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Hoko, Lever scissors type HB 7 -Flat/strip iron: up to 7 mm -Sheet metal sheets: up to 4 mm -Cutting capacity: see photo of the nameplate -Lift-down device: infinitely adjustable -Overall dimensions: 420/180/H1140 mm -Transport dimensions: 920/180/H325 mm -Weight: 34 kg
approved
dealer
dealer
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Total length: 160 mm -Width/Height: 30 mm -Dimensions: see drawing in the photos -Weight: 0.7 kg
approved
dealer
dealer
Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears-Handover: in current condition as viewed-Hand lever: missing-Lever shears: Sheet metal shears cutting length 200 mm-Holder: continuously adjustable-Number: 2x lever scissors available-Price: per piece-Dimensions: 580/120/H480 mm-Weight: 49 kg/piece
approved
dealer
dealer
Hand lever shears, long-blade sheet metal and round steel shears, lever shears, sheet metal shears, profile steel shears, hand lever shears -Manufacturer: VEB, Hand lever scissors type ScDH 5 -Cutting insert length: 200 mm -Cutting capacity: 5/7 mm -Lift-down device: infinitely adjustable -Dimensions: 470/120/H1270 mm -Weight: 28.1 kg
approved
dealer
dealer
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake, 7-piece set -Total length: 1053 mm / each 1x 238/58/390/100/270 mm / 2x 75 mm -Width/Height: 97 mm -Weight: 75 kg
approved
dealer
dealer
Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Peddinghaus, Lever shear, sheet metal and round steel shear type 3 BR 6 -Steel sheet: up to 6 mm -Round steel: up to 13 mm -Lift-down device: -Overall dimensions: 1175/150/H410 mm -Weight: 24 kg
approved
dealer
dealer
Square notching tool, notching side knife, die holder, cutting tool, punching tool, punch, punching die, punching punch-Punching tool: square notching tool-Punching dimensions: 40 x 79 mm square-Dimensions: 225/145/H95 mm-Weight: 10.6 kg
approved
dealer
dealer
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Total length: 285 mm -Width/Height: 100/120 mm -Dimensions: see drawing in the photos -Weight: 23.7 kg
approved
dealer
dealer
Separating tool, punching tool, punch, punching die, punching die, gill forming tool-Manufacturer: Peddinghaus, punching tool for: holding matrices-Bore diameter: 70 mm-Dimensions: 220/320/H115 mm-Weight: 32 kg
approved
dealer
dealer
Bending tool, die, upper knife, upper tool, straight tool-Tool for: press brake-Dimensions: 20 x 70 mm-Length: 3020 mm-Weight: 22 kg
approved
dealer
dealer
Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Length: 250 mm -Width/Height: 65/155 mm -Dimensions: see drawing in the photos -Weight: 7.7 kg
approved
dealer
dealer
Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shear type 3S / 6 R -Cutting insert length: 200 mm -Steel sheet: up to 6 mm -Flat/strip iron: up to 70x7 mm -Round steel: up to 13 mm -Cutting capacity: see photo of the nameplate -Lift-down device: -Overall dimensions: 385/160/H1500 mm -Transport dimensions: 1160/160/H400 mm -Weight: 24 kg
approved
dealer
dealer
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool radius: 10 mm -Thickness: 20mm -Total length: 471 mm -Total height: 188 mm -Recording width: 80 mm -Weight: 19.8 kg
approved
dealer
dealer
Channel folding machine, folding machine, folding former, seam closing machine, folding former, sheet metal bending machine, profiling machine-Rolls: 20-Distance rings: 14-Executions: different-Take: Ø 28 mm-Price: complete-Weight: 21.4 kg
approved
dealer
dealer
2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: Stroke 20 mm -Hole Ø 50 mm -Sheet width: up to 993 mm -Punch dimensions: 96 cutouts 22 x 3.5 mm -Individual components: see photos -Dimensions: 1400/820/H380 mm -Weight: 732 kg
approved
dealer
dealer
Double coiler, coiler, decoiler, for sheet metal processing, punch, eccentric press, hydraulic press, punching machine -Handover in the current condition as seen -Drive: without -Max. Recording: Ø 590 mm -min Recording: Ø 250 mm - Recording width: 300 mm -Dimensions: 1460/1000/H1400 mm -Weight: 332 kg
approved
dealer
dealer
Bending tool, die, upper blade, upper tool, straightening tool -Handover in its current condition as inspected -Tool for: Press brake -Tool: 88° -Thickness: 25 mm -Total length: 1009 mm -Lengths: 879/130 mm -Total height: 162 mm -Weight: 26 kg
approved
dealer
dealer
Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg
approved
dealer
dealer
Hand lever shears, long blade sheet and round steel shears, lever shears, sheet metal shears, profile steel shears-Handover: in current condition as viewed-Hand lever: missing-Manufacturer: VEB Pels, lever shears, profile steel shears type HS 7-Cutting insert length: 250 mm-Angle profile: see photos-Dimensions: 580/170/H600 mm-Weight: 76 kg
approved
dealer
dealer
Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shear type 3/5 R -Cutting insert length: 200 mm -Steel sheet: up to 5 mm -Flat/strip iron: up to 60x6 mm -Round steel: up to 13 mm -Cutting capacity: see photo of the nameplate -Overall dimensions: 380/160/H1310 mm -Transport dimensions: 970/160/H470 mm -Weight: 23 kg
approved
dealer
dealer
Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake-Tool for: press brake-divided-Tool: 88°-Dimensions: 188 x 55 mm-Total length: 351 mm-Lengths: 341/10 mm-Weight: 18.6 kg
approved
dealer
dealer
Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling Flame straightening -Drainage channel and water pump -Roller diameter: Ø 180 mm -Drive: PIV gearbox -electrically adjustable -Load capacity: 1 ton -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Manual switch -Counter bearing: laterally adjustable -Drive dimensions: 3600/820/H850 mm -Dimensions of counter bearing: 2950/820/H850 mm -Empty weight: 1300 kg
approved
dealer
dealer
Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 9 pieces -Profile diameter: 27 to 60 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 655/350/H120 mm -Weight: 42 kg
approved
dealer
dealer
Tool trolleys, workshop trolleys, mobile workshop trolleys, drawer cabinets, welding machine trolleys, machine trolleys-Width: 410 mm-Depth: 800 mm-Height: 1010 mm-Weight: 49 kg
