other machines for plastic used for sale (576)

Inverter and holder for ultrasonic welding machineTELSONICUltrasonicsSE-26/20-36kHz VK/ max 500 Wmax. converter voltage: 1500 Vwith holder and pneumatic loweringstroke: 40 mmsuitable for S840 and S842 used, tested !Dimensions: 470 x 80 x 115 mm

An essential ingredient for removing impurities from the material. With a specially developed rotor with replaceable blades, high friction is generated at the target fraction and thus ensures thorough cleaning. Maintenance hatches on both sides allow easy access to the interior. The housing and the screens underneath are made of stainless steel. A support frame is included as well as inlet and outlet nozzles for the water. More information on request!

Recycling plant/recycling plant General information • Plant type: PET sorting and washing system for the production of PET flakes • Manufacturer: STF-Maschinen & Anlagenbau GmbH • Year of construction: 2023 • New value EUR 4,970,000.00 • Market value (at location): EUR 3,052,000.00 • Installed in two connected halls incl. foundations • Plant currently not in operation (standstill since 11/2024) Technical key data • Max. configuration: 2,000 kg/h • Max. achievable output in continuous operation: 600 kg/h • Output in test run with good material: >1,500 kg/h • Energy requirement: 650-680 kWh (without hot washing system) Stages of the procedure 1. Feeding of PET material (pressed bales) 2. Coarse sorting via sieve drum 3. Magnetic separation of metallic impurities 4. 2-stage sensor sorting (materials) 5. Manual sorting via sorting belt 6. Mill and  ...

FOIL SEALING MACHINE type TS 1000 C-2 Year of Build 1980, Machine No: 1748, for the production of bags made of suitable Polyethylene and polypropylene films Product: Tren suture bag Processing: single-lane or dual-use printed two-lane unprinted Working width: max. 1000 mm Section lengths: 80 - 600 mm Film thicknesses: 2 x 0.015 - 0.100 mm depending on the welding wedge design Working cycles (mech.): max. 150/min. depending on film thickness, type of film, film quality and Section length Film web speed: max. 35 m/min Power consumption: 4 KVA Nominal voltage: 380 V Nominal frequency: 50 Hz Control voltage: 220 V Cooling water consumption: approx. 42 l/h Paint: light grey according to RAL 7030

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - various plastics such as PVC and polyamide - GRP (glass fibre reinforced plastics) - aluminium - bronze - wood - copper - brass and . Drilling (through holes and blin ...

Type: W/ARW 2200/12 Flying Splice Comm. 2011-001.1 Working width: 2200 mm Finished roll weight max. 2000 kg Finished roll diameter max. 2x 1200 mm Finished roll width min. 800 mm; max. 2200 mm Material Paper/ Foils 75 μm – 1000 μm Machine speed max. 1500 m/min Depending on the type of material and material thickness achievable Web tension: max. 1000 N Finished roll sleeves: inside 152.4 mm outside 162.4 mm - Type of cardboard sleeve, plastic - Sleeve tolerance according to DIN 6748 or 55470 Unwinding: Type ARW 2200/12 Unwinding: axisless 2 x 1200 mm; sleeve holder 6" L.W. (other dimensions with additional accessories possible) Sleeve holder: 6" L.W. (other dimensions with additional accessories possible) Pulleys: DM approx. 150 mm Brake: Generator brake with energy recirculation, control via ultrasonic sensor Path control: Edge control E&L with ultrasonic sens ...

Full complete line SACMI for plastic caps.

For sale complete line for plastic caps, include: 1. CCM48 with moulds and CVS 2. cooling system 3. slitting machine Perfect condition. Working at moment. Origin Italy.

Used lining machine PMC 250. Profile 916. Produced in SACMI Italy. Perfect working condition.

Condition: Very good condition

Condition: Very good condition

M. No.: 43954 Equipment / Additional information: Vacuum: 20 mbar Motor Oil: Type SAE 30 Qt.: 6 Ltr.

62 m³/h 60 hPa (mbar) 1,5 kW

M. No.: 070068681 Equipment / Additional information: Hz: 50/60 V250/300 m3/h P 100 hPa (0.1 bar)

Condition: Very good condition

Operating hours: 39521 h Equipment / Additional information: The compressor is water-cooled and has heat recovery. Rated power: 110.0 kW Motor speed: 1485 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

Operating hours: 70792 h Equipment / Additional information: The compressor is water-cooled and has heat recovery. Rated power: 160.0 kW Motor speed: 1500 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

(Can process mono-cup and duo-cup) Equipment / Additional information: Machine consists of: -Stacker (Blink) -Sleeve dispenser with 2x sleeve dispenser (Clever) -Steam tunnel, shrink tunnel (Clever) -Packaging unit (Schleuter) Along with this machine, we can also offer you STEAM SYSTEM JUMAG DG 260 (Ref. No. 95005.26)

Production speed: 600 cups/min Colours: 8 Min cup diameter: 60mm Max cup diameter: 130mm Min. cup height: 30mm Max- Cup height: 160mm Counter: 25’731’666 cups produced Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler

Manufacturer: Kraftanlagen Heidelberg Machine type: KK 75 FW Year of Make: 1990, 2018 Renewal 2018 Control & safety technology renewed Specifications: Roller arrangement: «F» Number of rollers: 4 Roller width: 2500 mm Roller bale diameter: 750 mm Drive power roller 1-4: 98 kW Roller speed: 2.5 – 50 m/min Roll gap adjustment: cylindrical worm gear Roller heating: hot water Plant control: Retrofit 2018 - LAE Engineering The calender line is offered, if you are interested with the Buss kneaders, including unwinding, calender rolling mill and winding. The calender was used for the production of homogeneous and reinforced PVC-P waterproofing films. Ongoing investments made in recent years. Among other things: 2018 Retrofit of the entire control technology line (excluding winders) 2018 Investment in safety equipment 2018 Investment in exhaust air 2019 Edge cutt ...

Complete Britas filter with many spare parts. Off site, available immediately.

M. No.: 00020 Type: Transfer device R3 Equipment / Additional information: Air pressure: min 6 bar The maximum size of the stacking basket is 530x300mm.

WITH COUNTING STATION M. No.: 3.65-00001 Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt

M. No.: 12088 10 Performance: 125 cups per min. (gross) Consists of: -Destacker -Bottom label dispenser -Side label dispenser 1 + 2 and 3 + 4 -Station for finishing the gluing of the side labels (ironing system) -Control station with camera surveillance -Stacker with counter -Outfeed conveyor for finished product The machine can also label round cups (160-180°, around). Cup height: 120-130 mm

COVER LABELING SYSTEM (Zweckform with Schleuter label dispenser) Age : ca. 1990 Performance: 100 cups/lids per minute Equipment / Additional information: Consists of: - Stacker - Labeling unit - Stapler

M. No.: 24 Kom.No.: 551.3852 Colours: 6 Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler Technical data Printing unit type DW 200-230 Plate cylinder diameter 200 mm Max. possible print image width 110 mm Number of print segments 4 pieces Max. cup rim diameter 130 mm Min. cup rim diameter 70 mm (55 mm) Max. print image unwinding (specific plate unwinding) (361 mm) / D 115 Max. cup height 130 mm Min. cup height 35 mm Max. bevel 10 degrees Production speed depending on cup size, quality and raw materials with UV drying up to 24,000 C/h El. connection value (machine, drying and stacking) approx. 35 KVA El. control with Siemens PLC / control station with 2-line display Voltage is 400V, 3 phase, neutral and ground. 50hz is the frequency.

COVER LABELING SYSTEM SCHLEUTER GU 2 DO WITH 2xSTATIONS FOR PLACING SPOONS M. No.: 12087 Performance: 90 lids per minute (spoon inserted diagonally) Consists of: - Stacker - 2xStations for placing spoons - Labeling unit - Delivery station

COVER LABELING SYSTEM SCHLEUTER GU 2 DU WITH CIRCULAR STATION FOR PLACING SPOONS RNA SRC-N-630-1R M. No.: 12086 Performance: 60 lids per minute Consists of: - Stacker - Circular station for placing spoons - Labeling unit - Stapler