sheet metal working used for sale (3,294)

plate thickness: 4,0 mm STplate thickness: 3,0 mm VAtable-size: 800 x 800 mmblade length: 250 x 250 mmstrokes per minute: ca. 55 minengine output: 4 kWweight of the machine ca.: 800 kgdimensions of the machine ca.: 1300 x 1300 x 1300 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manual Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9397092The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2040 mm, 3 mm

Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Bending rail sharpened Weight: approx. 2300 kg

Key data: 3000 mm, 12 mm, 1000 mm

Max. cutting length: 3000 mm Max. sheet thickness: 12 mm steel Controlled backgauge up to 1000 mm Cutting length limitation Cut edge lighting Light barriers for the rear area Spare blade Weight approx. 9000 kg

Offer 24206 Specifications: - Max. working width 2030 mm - Max. material thickness at 40 kg/mm² strength 1.25 mm - Backgauge - Space requirement approx. W 2250 x H 1050 x D 750 mm - Weight approx. 700 kg

Offer 24194 Specifications: - Max. working width 2040 mm - Max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank - Max. stroke upper beam 85 mm - Max. adjustment bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

for sheet thickness up to: 8 mm Flat Plate: 80 x 12 mm Square bar: 20 mm Round bar: 18 mm Weight approx.: 88 kg Dimensions: 620 x 250 x 380/880 mm high (with/without base)

Gr. working width: 1520 mm for sheet metal up to: 1.5 mm Opening width upper beam: 220 mm Adjustability bending beam: 60 mm Weight: approx. 450 kg Space requirement: 2150 x 430 x 1500 mm

Key data: 200 mm, 1 mm, 200 mm

Sell here an electric Schechtll bending bench with 6-way control and a matching 2m hand-held guillotine shears. Price net, you will receive an invoice with VAT.

Key data: 2000 mm, 1 mm, 2000 mm

Electric bending machine Schechtl 2000x1.25mm with 6-way control, in good condition. The machine can be loaded with a forklift. You will receive a proper invoice with VAT, price net 6900.-. Shipping possible throughout Europe. Please call us or send us a wading app.

sheet width - max.: 0350 mmcoil weight: 2,00 tcoil internal dia.: 470 - 530 mmcoil outside - diam. ca.: 1500 mmtotal power requirement: 1,0 kWweight of the machine ca.: 1,50 tdimensions of the machine ca.: 1,30 x 1,6 x 1,90 mmotor-driven, with manual central spreadingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0360 mmcoil weight: 3,00 tcoil internal dia.: 380 - 520 mmcoil outside - diam. ca.: 1500 mmtotal power requirement: kWweight of the machine ca.: 1,40 tdimensions of the machine ca.: 1,80 x 1,80 x 1,70 mwith infinitely variable drive, hydraulic centralized expansion, coil loop control via contact plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 mm, 1 t, 1200 mm

Sheet thickness max. 2 mm Largest belt width 250 mm Coil Outer Diameter 1200 mm Coil inner diameter 430 -550 mm Max. coil weight 2 x 1600 kg

Qty. 1 Second-hand cut-to-length line – on foundation Mfc.: Nantong Junpeng Built: 2013 Stopped: 2024 Strip width: max. 2,200 mm Thickness: 8.0 – 25.0 mm Max coil weight: 35 tons Motor: 250 kW, DC Pre leveller: 2+7 rolls Roll diameter: 300 mm FIN leveller: 11 work rolls Diameter: 260 mm

Qty. 1 Second-hand slitting line – on foundation Mfct.: Wuxi (China) Year: 2021 Material: Q235 carbon steel Max. strip width: 2,200 mm Thickness: 6.0 - 18.0 mm Slitter shaft diameter: 420 mm Rough leveler motor: 200 kW, 1,000 RPM Slitter motor: 160 kW, 750 RPM Recoiler motor: 400 kW, 1,000 RPM Tensile strength: max. 380 Mpa Yield strength: max. 250 Mpa

Compact hydraulic guillotine shears, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the alignment and machining of large workpieces precise and easy. It is operated via a foot pedal, which frees up the hands to align the workpiece. Specifications: Cutting length: 1320 mm Sheet thickness: 3.5 mm Strokes / min: 35 - 47 Number of hold-down devices: 9 Pressure hold-down: 2.5 t Front support arms: 1000 mm Back gauge: 600 mm Cutting angle: 1/2 - 2° Motor power: 5.5 kW Equipment: - High-quality, high-alloy scissor blades with a high chromium content - 2-fluted upper blade, 4-fluted lower blade - Hydraulic cutting angle adjustment - Manual cutting gap adjustment (from 4.5 mm) - Generous support arms with adjustable stop - Side stop with double scale - Feeder work table with ball rollers - Full-length front  ...

Key data: 3000 mm, 3 mm

with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Key data: 4040 mm, 2 mm

Motorized guillotine shears, with front-adjustable handle, sheet metal depositing to the front Sheet width: 4040 mm Sheet thickness steel: 2.5 mm Sheet thickness aluminum: 4.0 mm Sheet thickness stainless steel 1.5 mm Colour :grey/blue: Total power requirement :32 A Machine weight :3350 kg Dimensions: 4585 x 2592 x 14300 Cutting gap adjustment: manual Automatic hold-down Angle stop :1000 mm Cutting angle: > 1.11 degrees Adjustable back gauge: 0 - 750 mm

plate length: 1550 mmplate thickness: 3,5 mmnumber of rolls: 3 roll diameter: 120 mmtotal power requirement: 2,2 kWweight of the machine ca.: 750 Kgdimensions of the machine ca.: 2,2 x 1,5 x 1,6 mElectrically operated round roller via foot lever,Sturdy, welded construction stand,Rear roller adjustable for conical bending,Rollers are hardened,Top roller can be swivelled to remove the workpiece.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 1 t

for one-sided loading and unloading, with large stop plate and brake Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Coil weight: 1000 kg Machine Number: 308 Colour: blue/yellow Machine weight approx.: 350 kg Dimensions: 800 x 1800 x 1400 mm Coil width: 1000 mm Clamping range: up to 510 mm Load capacity in kg :1000 kg

new ultra-light construction site roll forming machine for double standing seam, with dismountable sides, 2 modules can be used for underfunding, as well as another Tool set for the production of double-sided overlays, so ferves can be used can be manufactured in a single pass (additional tool sets are an option), Sheet width: 720 mm Sheet thickness steel: 0.65 mm Sheet thickness aluminum: 0.8 mm Machine weight: 157 kg Dimensions: 1200 x 1400 x 560 mm Total power requirement: 220 V Colour: turquoise/white Profile height: 25 mm it Width adjustment Roll forming speed: 9 m/min

new standing seam roll forming machine, without length measuring device, without cross shear, emergency stop switch, 7 stations, Sheet width: 250 - 700 mm Sheet thickness steel: 0.7 mm Sheet thickness aluminium 0.8: mm Sheet thickness stainless steel 0.5 mm Machine weight :190 kg Dimensions: 1200 x 900 x 580 mm Total power requirement: 220 V Colour: grey Profile height: 25 mm with width adjustment Infeed width: 250 - 700 mm Roll forming speed: 9 m/min

- Working range pipe Ø 20 to 60.3 mm ( wall thickness 2.3 mm / mild steel ) - Preselection 4 bending angle via rotary control - Bending, deburring - Pipe extension length 3,000 mm with longitudinal stops - Thorn Retreat - Mandrel lubrication manual - Weight approx. 1,100 kg - L x W x H approx. 3,700 x 1,600 x 900 mm - Incl. 1 bending tool 60.3 mm / radius 180 without mandrel

Key data: 3000 mm, 200 mm, 400 kg

new laser cutting machine with 4kW fiber laser - Ideal workshop machine - Machine without changing table ! - Loading via manual extension table on the 3 meter side - Very space-saving - Extremely energy-saving cutting system - Only 5 x 3 meters installation area - Incl. commissioning / training Instruction in your factory - 4kW laser source - Top quality, arrange a viewing now! Cutting of steel sheet up to 20mm Cutting stainless steel sheet up to 10mm Cutting aluminum sheet up to 8mm Cutting brass sheet up to 8mm - Travel 3000 x 1500mm - Machine control in German - German service and spare parts supply - incl. nesting module - Very easy to use. - Powerful laser cooler The sale is exclusively to tradespeople. Delivery / Consulting / Sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 3.0m Height: 2.3m Length: 5.5m To ...

Laser engraving machine with 30 watts of laser power - Laser source 30 watt CO2 metal tube Demonstration machine, with minimum operating hours (approx. 10 hours) - incl. Windows 10pro 64-bit PC system - incl. 22" screen - Everything is fully installed and adjusted - Engraving software in German - Very easy to use - Switch on and get started - Co2 laser source with 30 watts for high-contrast and fast markings with extremely high resolution - Deep engraving possible - Wobble function - For engraving on e.g. wood, plastic, anodised surfaces, etc. - Heavy industrial quality - Complete system / ready for immediate use - Working space approx. 500 x 600 x 600mm (lxwh) - Clamping surface with mounting threads in 50mm increments - LED work area lighting - 50mm pipe connection for smoke extraction - Engraving area approx. 180 x 180mm - Expandable up to approx. 3 ...

UV laser engraving machine with 15 watt laser power Laser source with 355nm wavelength / 15Watt Demonstration machine, with minimum operating hours (approx. 15 hours) - incl. Windows 10pro 64-bit PC system - incl. 22" screen - Everything is fully installed and adjusted - Engraving software in German - 3D software (MM3D) - Very easy to use - Switch on and get started - UV laser source with 15 watts for high-contrast and fast Extremely high resolution markings - Engraving on practically all metals (stainless steel, brass, aluminium, etc.) - Engraving on practically all plastics (including PVC, silicone, etc.) - Engraving on real glass (also crystal glass) - Cutting of real glass possible - Heavy industrial quality - Complete system / ready for immediate use - Working space approx. 500 x 600 x 600mm (lxwh) - Clamping surface with mounting threads in 50mm increme ...

Laser engraving machine with 60 watt laser power used demonstration machine - with minimum operating hours (approx. 20 hours) - 60 watt MOPA laser (enables colored laser engraving on stainless steel) - incl. 4th axis (rotary unit) - incl. Windows 10pro 64-bit PC system - incl. 22" screen - Everything is fully installed and adjusted - Engraving software in German - Very easy to use - Switch on and get started - Fiber laser source with 60 watts for high-contrast and fast Markings with extremely high resolution (see pictures) - Depth engraving up to 4mm possible (also in hardened steel) - Wobble function, e.g. for cleaning metal components - for engraving on many metals (stainless steel, brass, aluminium, etc.) and a lot of plastics - Heavy industrial quality - Complete system / ready for immediate use - Working space approx. 500 x 600 x 600mm (lxwh) - Clampi ...

Laser engraving machine with 30 watts of laser power - Very few operating hours / used demonstration device (approx. 15 hours) - It's worth taking a look - incl. Windows10 PC 64bit (used / incl. monitor/keyboard/mouse) - Fully installed and adjusted - Engraving software in German - Very easy to use - Switch on and get started - Fiber laser source with 30 watts for high-contrast and fast Markings with very high resolution (see pictures) - Wobble function, e.g. for cleaning metal components - Depth engraving up to 3mm possible - for engraving on many metals (stainless steel, brass, aluminium, etc.) and a lot of plastics - Heavy industrial quality - Complete system / ready for immediate use - Working space approx. 390 x 270 x 350mm (lxwh) - Clamping surface with mounting threads in 50mm increments - LED work area lighting - 50mm pipe connection for smoke ex ...

with bending bolts Prism 80 mm Stop and die holder Foot switch, optional two-hand operation Pressure adjustment Colour: blue/beige Total power requirement: 5 kW Tool height: 200 mm Stroke 250 mm Pressure 40 t Dimensions: 1300 x 680 x 1110 mm Weight: 880 kg

with stop plate and 3 sets of rollers Projection:approx. 240 mm Color: Green Roller center distance: 63 mm Pick-up shaft: 25 mm Sheet thickness: 1.25 mm Dimensions:1200 x 800 x 1400 mm Weight: 70 kg Machine number: 7541002 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

with lifting function without decoiler Colour: grey Load capacity: 2000 kg Sheet width: 1250 mm Dimensions: 1000 x 1250 mm Weight: 100 kg The KRASSER Coilbox allows you to align your coil trolley or coil rack quickly and easily. The coil box lifts your coil wagon or coil frame by means of a hydraulic foot pump and the coil can then be easily moved in the X-axis by means of a small hand crank A line laser attached to the machine helps you with correct positioning, so the tedious alignment of coils is a thing of the past When ordering, please provide us with your coil rack/trolley footprint dimensions so that the coil box is the right size