sheet metal working used for sale (3,299)

plate thickness: 3 mmBending Angle: 165 °: dreiphasig total power requirement: 380 V - 10,5 A 50 HZ weight of the machine ca.: ca. 3.900 kgdimensions of the machine ca.: B 2400 x L 4300 x H 1700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 250 kN For example, punch a 16 mm hole in 12 mm steel Viewfinder via handwheel Range of tools is included in the price

sheet width: 1550 mmplate length: 2525 mmplate thickness: 6,4 mmPunching capacity: 200 kNspeed of positioning X: 50 m/minspeed of positioning Y: 50 m/mihno. of strokes: 200 / 400 Hub/mincontrol: MNC 32000 ATC: 22 Postotal power requirement: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmburner heads: 0total power requirement: 3 kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 mm, 3 mm

Max. bending length: 3000 mm Max. sheet thickness: 3 mm steel Manual backgauge Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam variable Bending rail ground Operating instructions Weight: approx. 5,000 kg

Max. sheet thickness: 1.5 mm steel 2 transit stations Weight: approx. 500 kg

Max. punching force: 500 kN Projection: 610 mm Includes an assortment of stamps and dies Weight: 1700 kg

1. Qty. 1 Second-hand slitting line Mfc.: DANIELI WEAN UNITED, LOOPCO, Built: 1994 Relocated: 2021 Raw Material CR, GI, COLOR COATING COIL Strip Width: 400 - 1,210 mm Thickness: 0.5 - 1.8 mm Slitter Stand (OD420 x ID255 10/15T=Each 30EA) Scope of supply: Uncoiler Coil Car with Coil Skid Uncoiler with Snubber Roll Coil Opener & No. 1 Pinch Roll Crop Shear Threading Table No. 2 Pinch Roll & Side Guide Slitter Stand Scrap Winder Loop Table Tension Pad with Separator Bridle Roll with Guide Table Recoiler with Separator Recoiler Coil Car with Coil Skid Hydraulic Equipment Electric Equipment 2. Qty. 1 Second-hand cut-to-length line Mfc.: DONGBU ENG Built: 1997 Relocated: 2021 Raw Material CR, GI, COLOR COATING COILS Strip width: 600 – 1540 mm Thickness: 0.5 - 2.0 mm Coil Weight Max. 15,000 Kg Sheet Length: 500 - 2,800 mm Scope of supply: Coil Car Un ...

Material width: 1000 mm workable material thickness: 1-20 mm min. part length: 150 x 100 mm Required power: 4 x 4,8 kW Rotation speed: 1400 rpm Length: 2220 mm Width: 1500 mm Height: 1500 mm Weight of machine approx.: 1550 kg

plate thickness: 8 mmPunching capacity: 220 kNworking area: 3000x1500 mmControl: Siemens weight of the machine ca.: 17500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 3050 - 4020 mm2 pieces of upper tools for press brake:Deer foot upper tool No.1, picture. No. 2: Dimensions: 3000 x 75 mm, price = 670,--Deer foot upper tool No.2, picture. No. 3: Dimensions: 3000 x 120 mm, price = 670,--Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24295 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - Projection 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Motor back gauge with positioning control 20 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 rpm - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space required including back gauge, without front support arms -ca. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - E-foot switch - Cutting Line Illumination - - Cutting Length Selection - Rear area protection with light barrier

plate thickness: 1,2 mm0: 62 mmweight of the machine ca.: 50 kgProducer: SahinlerType: IK 1,2YOM: newShaft Length: 140 mmBordering Capacity: 1,2 mmRoll-Ø: 62 mmThroat Depth: 100 mmDimensions of the Machine (LxWxH): 560 x 220 x 500 mmWeight: 50 kgAdditional information: • Cast iron heavy duty main frame• Forward-backward adjustable sheet support• Easy to carry for workshops• Forward-backward adjustable bottom shaft• Rolls shafts are special steel material• 7 set of rolls standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,25 mmShank diameter: 26 mmweight of the machine ca.: 50 kgSheet thickness: 1.25 mmRoller shaft color: 62 mmRoller center distance: 250 mmShaft-Ø: 26Throat Depth: 260 mmDimensions of the Machine:Length: 600 mmHeight: 550 mmWidth: 350 mmWeight: about 50 kgincl. standard rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 0,8 mm0: 52 mmweight of the machine ca.: 30 kgProducer: SahinlerType: IK 0,8YOM: newShaft Length: 110 mmBordering Capacity: 0,8 mmRoll-Ø: 52 mmThroat Depth: 80 mmDimensions of the Machine (LxWxH): 380 x 180 x 380 mmWeight: 30 kgAdditional information: • Cast iron heavy duty main frame• Forward-backward adjustable sheet support• Easy to carry for workshops• Forward-backward adjustable bottom shaft• Rolls shafts are special steel material• 7 set of rolls standardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mmplate thickness: 3 mmtotal power requirement: 3 kWweight of the machine ca.: 1600 kgdimensions of the machine ca.: 2.060 x 1.140 x 1.210 mmProducer: OSTASType: RGM 1050 x 3YOM: newMax. Shearing Length: 1.050 mmShearing Capacity: 3 mmShearing Angle: 2°30Strokes Per Minute: 35 d/dMotor Power: 3 kWTable Width: 510 mmTable Height: 820 mmRear Gauge Distance: 500 mmDimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mmWeight: ca. 1.100 kgAdditional information: • Manual backgauge with 500 mm stroke• Squaring arm with T-slot, stopper and ruler• Foot pedal• Front sheet holding arms• Cutting line lighting• Protection Cagesoptional:• Cutting unit counter• Motorised backgauge with 500 mm stroke• Backgauge with NC control• Pneumatic Sheet Support System• Optical security bar• 0-180° angle cuttingThe data for this ad was created with ModulMWS - th ...

material width: 320 mmmaterial thickness: 8 mmno. of straightening rolls: 9 material cross-cut: 2000 mm²weight of the machine ca.: 4,2 tdimensions of the machine ca.: 2000x2000x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 400 mmcoil outside dia.: 1200 mmweight max. in kg: 1500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mmcoil weight: 0,5 tcoil internal dia.: 480-530 mmcoil outside dia.: 1200 mmweight of the machine ca.: 0,3 tdimensions of the machine ca.: BxTxH 1200x1200x1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 28 t: 2000 mm: 1000 mmmachine weight ab.: 11000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mmplate thickness: 40 mmpre-bending: 30 mmupper roll diameter: 390 mmlower roll diameter: 360 mmside roll diameter: 300 mmtotal power requirement: 22 kWmachine weight ab.: 17200 kgOverall size: 5060 x 2200 x 2180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mm: 4 mmsheet thickness for stainless steel: 2 mmtotal power requirement: 7,5 kWrear stop: 750 mmweight of the machine ca.: 2600 kgdimensions: 2810 x 2230 x 1360 mmStandard equipment:- All-steel welded construction with static and dynamic frame rigidityframe rigidity- Direct drive with brake motor- Specially alloyed cutting blades- 750 mm motorized, digitally adjusted backgauge with ball screwsrecirculating ball screws- Manual blade gap adjustment system- Mechanical sheet clamping system with plastic base- Work table with insert plates- foot switch for single and repeat cutting cycles- 1 x squaring arm 1000 mm long with metric scale- 2 x 800 mm front material support arms- Front stop- Finger protection - front and rear covers- Rear light guards- CE declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 tchamfer lenght: 3150 mmdistance between columns: 2600 mmengine output: 15 kWcontrol: CYBELEC VisiTouch weight of the machine ca.: 10900 kgdimensions of the machine ca.: 3990x1750x2900 mmEquipment:- Controlled axles: Y1, Y2, X, R, Z1, Z2, X1- Fully dynamic, hydraulic crowningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 2 mm: 90 mmadjustable bending rolls: 90 mm: 2 kw: 5 mmweight of the machine ca.: 4000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 60x3 mm: 60x3 mm: 35 mm: 64x4 mm: max. 210 °: R10-R300 bending speed: 1,25/2,5 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 130 kgdimensions of the machine ca.: 595x363x900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 6 mmpre-bending: 5 mmupper roll diameter: 220 mmtotal power requirement: 2,2 kWweight of the machine ca.: 4000 kgdimensions of the machine ca.: 5200 x 1150 x 1400 mmEquipment:- Taper bending device- Swing-out top roller- Motorized up and down movement of the rear roller, Up and down movement of the lower rollers by handwheel- St-52 steel construction housing- Separate foot pedal for control- Driven by electric motor + planetary gearbox- Hardened rollers- CE conformityOPTIONAL:Motorized up and down movement of the bottom roller- Digital display to show the positions of the rear roller- Double speed motor- Variable rotation speed- Special clamping- Extended rollers- Profile rollersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,5 mm: 260 mmroll diameter: 95 mmweight of the machine ca.: 295 kgdimensions of the machine ca.: 1482x450x1145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 28 t: 2000 mm: 1000 mmmachine weight ab.: 11000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2550 mm: 4 mmsheet thickness for stainless steel: 2 mmrear stop: 750 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3050 kgdimensions: 3300 x 2230 x 1360 mmStandard equipment:- All-steel welded construction with static and dynamic frame rigidityframe rigidity- Direct drive with brake motor- Specially alloyed cutting blades- 750 mm motorized, digitally adjusted backgauge with ball screwsrecirculating ball screws- Manual blade gap adjustment system- Mechanical sheet clamping system with plastic base- Work table with insert plates- foot switch for single and repeat cutting cycles- 1 x squaring arm 1000 mm long with metric scale- 2 x 800 mm front material support arms- Front stop- Finger protection - front and rear covers- Rear light guards- CE declaration of conformityYoutube video link:https://www.youtube.com/watch?v=pCuKwtBIQto&ab_channel=BaestleinG mbHThe data f ...

sheet width: 2020 mmplate thickness: 1,5 mmdaylight opening: 100 mmBending Angle: 135 °weight of the machine ca.: 1.300 kgAccessories / equipment:- Machine frame made of welded steel construction- segmented upper tool- motor workpiece clamping- Angle adjustment via handwheel with scaleAdditional equipment:- Backgauge with manual handwheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.