sheet metal working used for sale (3,354)

sheet width - max.: 0300 mmcoil weight: 0,150 tcoil internal dia.: 280 - 450 mmcoil outside - diam. ca.: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mManually adjustable brakeFront and rear limiters4 support armsSensor-controlled loopsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully automatic tube bending and welding system with solid-state laser Trumpf TruDisk 3002 (6C), for the production of round, oval, polygonal, longitudinally welded tubes. Diameter from 80-400mm, length from 80-620, material thickness 0.8-2.0mm (steel, chrome steel and stainless steel). Other features of the fully automated pipe production machine are: -Bending station (weld edge bending) -Camera-guided welding optics. -Seam smoothing to eliminate any height offsets in the weld -annealing" at approx. 500 °C to optimize subsequent expansion or calibration -Extraction system for welding fumes. -Complete maintenance by manufacturers. Further machine data can be found in the pictures or under the homepage of weil-technology (solutions/machines/ecostar) The machine can be viewed under power at our Schönauer Straße location in 78737 Fluorn-Winzeln. Dismantling, loading and tr ...

Univ. Flanging Machine Specifications: - Flanging machine for raising right-angled borders, on straight, round and curved sheet metal parts. - Drive 400 V - Space requirement approx. W 650 x H 1250 x D 650 mm - Weight approx. 200 kg

A hydraulic large-format sheet metal shear Schneider is available. Width: 6020mm, bending length: 6000mm, max. sheet thickness at 6000mm: 10mm. With position display. An on-site inspection is possible.

Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Max. upper bolster stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via toggle switch Bending rail in top condition Manual backgauge with spring fingers 4000 kg

Qty. 1 Second-hand Copper Strip Production Plant – Still in Production Mfc.: J. F. Norton, Shinkwang Tech, Partec, Rozai, Chungwon Control & Sunil, Handuck R-FECO, Mirae Tech Inc., Changjo, Wuishi, Youngchang Machinery, Dongshin Tech., Sonoda Engineering Co., Wuxi Longar Mach., Backsan Machinery, Youngdong Coil Center, Deakwang Machinery, Hanguk E.N.G, Built: 1962, 1965, 1990. 2000, 2001, 2008, 2017, 2018, 2019, 2020 Revamping: 2017, 2019, 2020, Scope of supply: Roughing Mill Mfc.: Famer Norton Type: 4-Hi Irreversible – WR Drive 318 x 610 x 635 mm Built: 1965. 06 Revamping: 2017. 09 by Shinkwang Tech Strip width: 200 – 530 mm Thickness: 3.0 – 12 mm Intermidiate Mill Mfc.: Shinkwang Tech Type: 4-Hi Irreversible, WR Drive - 225 x 570 x 720 mm Built: 2017. 06 Revamping: 2020 by Partec Strip Width: 200 – 650 mm Thickness: 0.8 – 5.0 mm Finishin ...

Key data: 6400 mm, 1 mm

used Jorns double bending machine, with the following equipment: - 4 pneum. Clamping finger with short-part clamping finger - Attachment rail - Foot control - Sheet metal cassettes - Upper beam with rebate groove - Hydr. Material thickness adjustment - Clamp and angle stop (Matic) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6400 mm Sheet thickness max. steel 1.5 mm Sheet thickness max. aluminium 2.0 mm Sheet thickness max. VA 1.0 mm Back gauge (min.) 15 mm Back gauge (max.) 1125 mm Colour anthracite/light grey Total power requirement 20 A Dimensions 7332 x 3721 x 2040 mm Weight 9250 kg Upper beam stroke (opening width) 200 mm Bending angle (max.) 145 degrees Crowning manual without roller scissors Number of stands 5 pieces Insertion depth 1150 mm Machine number K13036

Offer 25500 Specifications: - Cutting length 3050 mm - Cutting thickness at 400 N/mm², strength 13 mm - Cutting thickness at 400 N/mm², strength up to 1000 mm, length 15 mm - Cutting angle 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min -Mot. Back gauge up to 1000 mm - Rear area protection with light barrier - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet thickness in mm -Auto. Cutting angle adjustment according to sheet thickness - Cutting length limitation -Auto. Positioning of the backgauge (8 programs – 80 sets) with - Digital display and autom. Backgauge retraction - Possibility of mot. Adjustment of the backgauge by 2 push buttons - Drive 400 V / 22 kW - E - Footswitch - Space requirement without support arms approx. W 4200 x H 2250 x D 2200 mm - ...

- Two-roller technology - 180° arrangement of wheels - Closed work area with coolant and lubricant equipment - Hydraulic roundabout centering device - Gearbox with oil circulation lubrication -Temperature Specifications: Workpiece diameter (max.): 360 mm Blank diameter (max.): 380 mm Workpiece length (max.): 600 mm Center width (max.): 1,340 mm Tip width (min.): 200 mm Tool holder DIN 55026: Gr. 11 Force per axis (transverse) (max.): 117 kN Axle force (longitudinal)/feed axle (max.): 140 kN Stroke (transverse): 190 mm Stroke (longitudinal): 690 mm Feed axis speed: (max.) 1.8 m/min Rapid traverse (longitudinal): 7.0 m/min Adjustment roller (axial): 0-20 mm Stroke ejector: 380 mm Ejector force: 26 kN Tailstock stroke: 800 mm Tailstock force: 5-19 kN Speeds (infinitely adjustable): 6-231-387 min-1 25-850-1,550 min-1 Main drive (DC motor): 33  ...

- Gearbox with oil circulation lubrication - Blank counter holder (optional) - Processing unit KA - behind the machine (optional) - Specifications: Blank diameter (max.): 1,200 mm Tip width : 900 mm Tool holder DIN 55027: Gr. 11 Axis force (transverse) (max.): 20 kN Axis force (longitudinal) (max.): 30 kN Stroke (transverse): 360 mm Stroke (longitudinal): 750 mm Cross speed: (max.) 3.0 m/min Longitudinal speed: (max.) 2.0 m/min Stroke ejector: 400 mm Tailstock stroke: 750 mm Speeds (9 levels): 42-660 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 6,000 kg

- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) Specifications: Blank diameter (max.): 700 mm Tip width : 825 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Transverse speed: (max.) 6.0 m/min Longitudinal speed: (max.) 6.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-2,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 3,500 kg

- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) - Double reel seat Specifications: Blank diameter (max.): 700 mm Tip width : 800 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Cross speed: (max.) 7.0 m/min Longitudinal speed: (max.) 7.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-3,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 7,000 kg

However, equipping the PNC 90-3A with three additional PNC/CNC-controlled auxiliary axes now enables a working area of approx. 900x1,100mm and thus an extremely economical production of large printed parts. - Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) - Processing unit KA (in front of the machine) - 4-fold tool changer Specifications: Blank diameter (max.): 900 mm Tip width : 1,100 mm Tool holder DIN 55027: Gr. 11 Axis force (transverse) (max.): 45 kN Axis force (longitudinal) (max.): 45 kN Stroke (transverse): 305 mm Stroke (longitudinal): 650 mm Cross speed: (max.) 7.0 m/min Longitudinal speed: (max.) 7.0 m/min Stroke ejector: 300 mm Tailstock stroke: 450 mm Speeds (infinitely variable): 100-2,300 min-1 Main drive: 28 kW Hydraulic drive: 15 kW Operating voltage: 400 V Frequ ...

Workforce: 300 kN/30 t Tool height: 200 mm Stroke length: 0 - 300 mm Bending capacity with prism tool MW 125/240: 200 x 16/200 x 24 mm Bending speed: 0 - 1.3 m/min Drive motor: 380 V, 5.5 kW Weight: 800 kg Footprint: 1250 x 820 x 1120 mm

Shaft Ø: 40 mm Bending Capacity: Flat bar upright at 500 mm Ø: 60 x 10 mm flat at 400 mm Ø: 100 x 15 mm square at 500 mm Ø: 35 mm L-iron leg outwards at 450 mm Ø: 50 x 50 x 6 mm L-iron leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-iron T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm electr. Connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 400 kg

Cutting length: 2520 mm, cutting thickness: 4 mm, voltage: 380 V, power connection: 16 A. The blades of the shears are likely no longer able to be sharpened due to wear and tear and would need to be replaced. On-site inspection is possible.

Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Weight: approx. 2300 kg

A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.

A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.

A high-performance circular shear Aryma for series production of discs and rings made of sheet metal is available. Material thickness: 3mm, max. disc diameter: 150mm, max. square sheet disc diameter: 1000mm, max. octagonal disc diameter: 1250mm, cutting speed: 70m/min, cutting roller diameter: 70mm. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1750mm, weight: approx. 1500kg. An inspection on site is possible.

Key data: 1250 mm, 1 mm

with the following equipment: segmented with quick-clamping system Segment height: 100 mm Division of the segments: 8 x 100 mm 1 x 30/40/50/60/70 mm 1 x right corner 100 mm 1 x corner left 100 mm with engraved measurement numbers in upper and bending beam segments incl. wheels Extras: with window sill insert for the production of head edges, segment height 100mm with depth stop with T-slot rail Working length: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.80 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle (max.: 150 mm Machine number: UK 20361

with 5 pairs of splitting knives (manually adjustable), with manual 5 roller straightening mechanism, with motorized guillotine shears for the cross-section, with PLC touch control and foot switch. Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Sheet thickness steel: 1.25 mm Working width: 1250 mm Farbe/Colour grün/lichtgrau Total power requirement: 3.1 kW Machine weight: 1500 kg Straightening rollers: 5 pieces Number of blades: 5 pairs Operator side seen from the inlet side on the left Machine Number: 73350-10

DMG Mori Seiki LaserTec 50 FineCutting Sauer Laser Machine YOC 2010 Control: Siemens 840 D Power Specifications Max. travel X-axis 540 mm Max. travel Y-axis 500 mm Max. travel Z-axis 700 mm 5-axis laser precision machine for machining diamond tools up to Ø 355 mm and 420 mm in length • Linear actuators in X / Y with an acceleration > 1 g • Highly dynamic torque motors in both rotary axes (B and C axis) • Compact machine design with only 4m² floor space + Keller exhaust air extraction system

Key data: 2540 mm, 8 mm

Max. bending length: 2540 mm Max. sheet thickness: 8 mm steel Upper roller diameter: 200 mm Clockwise and counterclockwise rotation via footswitch Safety rope hoist Conical rounds possible Motorized rear roll infeed Lower roll feed via handwheel with position indicator Weight: approx. 4,500 kg

Offer 25468 Sheet metal – roll forming line for shelves Specifications: - Shelf width approx. 250 mm - Material thickness 1.25 mm - Roll forming unit with 16 roll stations - hydr. Punching unit - Straightening unit make DREHER -Mot. Reel CAMU Load capacity approx. 1.5 T -Control panel - Space requirement / footprint 14 x 1.5 m - Weight approx. 10 T

Key data: 3000 mm

Used machine in good condition. Available for immediate delivery. - Laser type: CO2 - Working area (X x Y x Z): 3,000 x 1,500 x 115 mm - Max. working weight: 900 kg - Positioning speed X / Y: 200 m/min - Simultaneous positioning speed: 300 X+Y m/min - Laser power: 6 kW - Thickness of the iron max: 25 mm - Thickness of stainless steel max: 25 mm - Thickness of the aluminium max: 15 mm - TRUMPF Liftmaster loading and unloading unit (Liftmaster currently not installed)

DMG Mori Seiki LaserTec 50 FineCutting Sauer CNC Laser Precision Machine Year / Model: 2019 Control: Celos with Siemens 840D sl Operate CELOS with Siemens 840D sl Operate including 2l .5 ERGOline Control with multi-touch screen CNC Laser Precision Machine with High Speed Machining LASERTEC 50 FineCutting for laser fine cutting, laser drilling, laser welding NC swivel rotary table highly dynamic and precise Travel: 500 mm x 500 mm x 700 mm travel integrated ytterbium cw fiber laser 450W qcw ytterbium fiber laser with 4500W Pulse peak power and 450 W power Processing head (80 mm focal length), 5-axis transformation 100 working hours (new-new) Kaufpreis neu/Buying price in year 2020: 890.000,- Eur, Made in DMG Germany. Included: Fanuc robot automation + Keller autom. Extraction system solid machine base frame made of mineral casting, Camera through optical path for fib ...

Large working width: 3060 mm for sheet metal (at 40 kg strength) up to: 4 mm Kl. Bending radius: sheet thickness x 1.25 Kl. Inboard height: sheet thickness x 6 Opening width of the upper beam: 220 mm Adjustability of the lower/bending beam: 90 mm Max. bending angle: 180° Lifting speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Space requirement: 4150 x 1800 x 2500 mm

sheet width: 2600 mmplate thickness: 5 mmrear stop: 1000 mmcutting angle: 1°06 °no. of strokes: 45 Hub/minvoltage: 380 V / 50 Hztotal power requirement: 5,5 kWweight: 4500 kgdimensions of the machine ca.: 3600 x 2200 x 1600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. cutting length: 3050 mm Max. sheet thickness: 6 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cut edge lighting Hydraulic shear angle adjustment Knife sharpened Weight approx. 6500 kg