sheet metal working used for sale (3,297)

tube diameter: 60 mmwall strength: 3 mmbending radius min.: 2 x Rohr-Ø ÷ R200 mmbending angle: 0 - 180 °gas tube pipelines: 2 (60.,3mm) mmspeed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kWweight of the machine ca.: 0,7 t- Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length)- Electromechanical drive of the bending axis- hydraulic clamping- mandrel feed / extract- 30 programs x 9 bending angle + correction angleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 950 mmworkpiece width - max.: 1,0 - 50 mmsandingbelt width: 970 mmsandingbelt length: 1900 mmweight of the machine ca.: 1,8 tThe SMD 123 RE is a universal entry-level machine for all-round deburringUniform edge rounding and surface grinding of sheet metaldry process. Suitable for processing steel, stainless steel and aluminium. The non-slip conveyor belt enables safe transport and theMachining even of small workpieces. The two rotor heads ensure an all-round uniformEdge rounding and a directionless finish. The intuitive operation via touch panel allows every employeeget to grips with the machine quickly. The SMD 1 models are installed and ready for operation in a short time. The compact design saves valuable production space. Low acquisition and operating costs lead to shortamortization periods and guarantee economical processing of yourworkpieces.consisting of:- Grinding  ...

x-travel: 1200 mmy-travel: 600 mmz-travel: 600 mmControl: Heidenhain iTNC 530 spindle speed:: 6000 1/min.spindle taper: 50 SKspindle drive: (S1) 10 kWtable surface area: 1300 x 600 mmtable load: 1200 kgfeed speeds: 1-10000 mm/minrapid travel x/y/z: 20/20/15 m/mindistance table - lower edge spindle: 125-725 mmtotal power requirement: 25 kVAweight of the machine ca.: 7,5 tdimensions of machine: 3600 x 2300 x 3000 mmEquipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer- Max. tool diameter 80/150 mm- Max. tool length 250 mm- Max. tool weight 8 kg Preparation for hydraulic machine vice Preparation for 3-D measuring probes Chip conveyor Coolant system, coolant through spindle 20 bar Machine documentationWorking hours (date 1st. November 2024):- Control on: 60.818 h- Machine on: 59.598 h- Program cycle: 22.283 h- Sp ...

sheet width: 3100 mmplate thickness: 50 mmpre-bending: 40 mmtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,7 x 3,0 x 3,0 m4-ROLL Hydraulic Plate Rolling MachineWorking length 3100 mmMaximum thickness Pre-bending 40 mmBending 50 mmYield Point: 240 N/mm2Number of rolls 4Motor Power 55 kWMin. diameter mm - Ø Top Roll Diameter x 3Top roll Ø 540 mmBottom roll Ø 510 mmSide roll Ø 440 mmLength 6700 mmHeight 3000 mmWidth 3000 mmWeight 40.000 kgWith:Cone bending deviceInduction hardened rollsDigital readout for side rollsFully welded steel (St-52) frameSeparate moveable control panelDual bending speedsElectronic ParallelismAll rolls are mounted in spherical roller bearingsHydraulically opened/closed drop end controlled from control panelActivation of cone rolling function and position adjustment via buttons onthe control panelCentral rolls ...

sheet width: 1000 mmplate thickness: 3,3 mmdistance between columns: 1050 mmdiameter of upper rolls: 90 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,39 tdimensions of the machine ca.: 1,4 x 0,9 x 1,2 mmSheet metal bending machine with special dimensions:- Capacity 700 x 4 mm- Conical bending- Swing-out top roller- Emergency release safety device- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 700 mmplate thickness: 4,0 mmdistance between columns: 720 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 0,95 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 tworkpiece diameter: 320 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 5 mmplate thickness: 1000 mmdistance between columns: mmtotal power requirement: 4 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mmplate thickness: 3,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 95 mmtube diameter: 140 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,35 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 8 mmblade length: 250 mmangle adjustable from - to: fest table surface area: 840 x 750 mmtotal power requirement: 3,0 kWweight of the machine ca.: 1,3 tdimensions: 1,4 x 1,1 x 1,5 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,5 mmroll diameter: 98 mmthroat: 160 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 550x1400x1500 mDelivered with:• hydraulic version• 4 set of wheels• Foot control• Brake motor• Emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 30 mmsquare edge steel: 25 mmL-beam: 80 x 80 x 8 mm: 200 x 13 / 350 x 6 mm: 40 tthroat: 175 mmwork stroke: 32 mmwork height max.: 980 mmhole diameter in sheet thickness: 20 x 15 / 38 x 8 mmtotal power requirement: 3,0 kWweight of the machine ca.: 0,62 tDimensions (LxWxH): 1,0 x 0,8 x 1,3 0Profile steel scissors with- 1 foot trigger- Support tables- Rectangular notcher- Hole punch including toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 x 5 mmsquare edge steel: 16 x16 mmround bar steel: 18 mmL-beam: 100 x 8 mmdimensions: 400 x 290 x 280 mmweight: 35 KgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate thickness: 8 mmpre-bending: total power requirement: 7,5 kWweight of the machine ca.: 3,6 tdimensions of the machine ca.: 3600x1250x1350 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,2 mmroll diameter: 62 mmthroat: 100 mmtotal power requirement: 0,75 kWweight of the machine ca.: 130 kgdimensions of the machine ca.: 1,1 x 0,5 x 1,3 mFlanging machine is equipped with:- Emergency switch- Footswitch- 7 pcs. Roll setsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 1015 mmmaterial thickness: 1 mmspeed: von Hand weight: 240 Kgdimensions: 1420 x 600 x 750 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 3 mmdistance between columns: 1100 mmback stop - adjustable: 600 mmconnected load: 3 kWweight of the machine ca.: 1,1 tdimensions: 1,7 x 2,1 x 1,3 mThe machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,5 mmroll diameter: 98 mmthroat: 160 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 550x1400x1500 mDelivered with:• manual version• 4 set of wheels• Foot control• Brake motor• Emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mmplate thickness: 4 mmdistance between columns: 2100 mmdiameter of upper rolls: 140 mmtotal power requirement: KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mmplate thickness: 3,0 mmdistance between columns: 1300 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,35 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 tworkpiece diameter: 150 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mmplate thickness: 2,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 76 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,8 x 0,8 x 1,3 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Upper and lower roller driven, feed roller without drive- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 tworkpiece diameter: 500 - 3800 mmdrum diameter: 350 x 150 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 tworkpiece diameter: 150 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 tworkpiece diameter: 500 - 3800 mmdrum diameter: 350 x 150 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,5 kWweight of the machine ca.: ca. 1,8 tDimensions (LxWxH): 2,2 x 2,7 x 0,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1380 mmworkpiece height: 70 mm: total power requirement: 45 kWweight of the machine ca.: 5.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,6 mm: 4 tblade length: 156 mmangle adjustable from - to: fest Gradtable surface area: 450m x 305 mmtotal power requirement: Handbetrieb kWweight of the machine ca.: 95 KgDimensions (LxWxH): 530 x 380 x 480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 3 mmdistance between columns: 2100 mmback stop - adjustable: 600 mmconnected load: kWweight of the machine ca.: 1,1 tdimensions: 2,7 x 2,1 x 1,4 mThe machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 305 mmmaterial thickness: 1,0 mmspeed: von Hand weight: 45 Kgdimensions: 500 x 340 x 420 mCombined sheet metal working machine with:- Bending, tool widths 25 - 50 - 75 - 75 - 105 mm.- Rolls, roll diameter 38 mm- scissors, max. 1015 x 1mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 30 x 8 mmsquare edge steel: 12 mmround bar steel: 15 mmweight: 0,025 t: 51 x 31 x 22 cmdimensions: 135 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.