sheet metal working used for sale (3,297)

sheet width: 1270 mmplate thickness: 2,0 mmdistance between columns: 1300 mmdaylight opening: 48 mm: 135 °total power requirement: Handbetrieben weight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,9 x 1,2 mSegment-bending machineSegment widths:25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 35 (600) mm: 35 (900) mmL-beam: 50 x 50 x 5 (800) mmT - beam - web outwards: 60 x 7 (600) mmAxis diameter: 50 mmwork speed: 4,5 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,1 x 0,8 x 1,5 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mmplate thickness: 8,0 mmdistance between columns: 1070 mmdiameter of upper rolls: 150 mmpre-bending capacity: 6,o mmconnected load: 4,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,6 x 0,65 x 1,1 mm- Electrically adjustable rear roller- Electrically adjustable lower roll (material clamping)- Digital readout for rear roller movement- Digital readout for lower roll movement (material clamping)- Hardened rolls- Conical rolling- Swiveling top roll- Brake motor- Emergency stop- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tno. of strokes: 40 - 120 Hub/minsheet width: mmtotal power requirement: 40 kWPressing capacity 160 tonTable clamping area 1,100 x 1,280 mmRam clamping area 850 x 890 mmDistance between guides 1,120 mmDistance between columns (below guide ways) 1,350 mmDistance between Table and ram in upper position approx. 400 mmNo. of strokes 40 - 120 /minAdjustment of stoke 67 / 115 / 160 mmRam adjustment, motor driven 125 mmEjector travel 50 mmTotal electrical load, approx. 40 kW - 500 V - 50 HzWeight, approx. 24,000 kgAccessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubrication. Hyd ...

: 35 mm: 35 mmbar material dia. max.: 70 x 2 mmrectangle: 60 x 60 x 3 mmflat steel: 60 x 10 mmAxis diameter: 50 mmwork speed: 4,3 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 0,9 x 0,95 x 1,4 mProfile bending machine with:- Foot pedal right/left rotation- Hardened special steel shafts- 1 set of standard rollers- 2 rollers are drivenThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24236 Specifications: - max. working width 2550 mm - max. cutting capacity St 40 4.0 mm - Cutting angle 1.30 ° - Positioning-controlled back gauge 20 - 750 mm - Front angle stop + support arms - E. footswitch - Stroke rate up to 34 rpm depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including back gauge, without front support arms -ca. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg

Key data: 1250 mm

Exhibition machine (unused) Working width 1,250mm Bending capacity steel : 1.25 (400N/mm2) Bending angle max. 135 degrees

Brand new Schechtl segment bending machine Sheet width: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.8 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle: 150 mm

: 10 mmPunching force: 55 to: 40x10 mmflat steel: 300x15 oder 200x20 mmL-beam 90°: 120x120x10 mmL-beam 45°: 70x70x7 mm: 40 mmsquare edge steel: 40 mm: 37 /min.throat: 250 mmweight of the machine ca.: 1.800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 2100 mmmaterial thickness: 4,00 - 6,00 mmno. of straightening rolls: 11 sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 85 mmstraight. speed ca.: m/ minbetween stands ca.: 2000 mmtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: 4,50 x 1,00 x 2,50 mMechanical height adjustment- Mechanical tilting mechanism- Bottom crowning- ReversibleElectric motor with adjustable speedBearings have been checkedAll lubrication points have been replacedControl cabinet has been rewired and cleanedNew oil has been addedLeveler is powered. Leveling test is possible.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. punching force: 50 kN Stroke actuation via footswitch

Max. sheet thickness: 2 mm steel Max. blank diameter: 1000 mm Motorized drive via foot switch

Punching capacity: 165 kNworking area: 2070 x 1280 mmplate thickness: 6,4 mmcontrol: CC 220 workpiece weight: 150 kgpunch diameter: 76,2 mm: 80 m/min: 55 m/minweight of the machine ca.: 8000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3050 mmtable width: 1530 mmburner heads: 1 stroke: 290 mmspeed: 120 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2,5 mmbending angle max.: 135 °stroke of upper beam: 25 mmweight of the machine ca.: 285 kgdimensions of the machine ca.: 1,35 x 0,85 x 1,20 m PRICE: 2.045,-- EUR - with an oblique segmented upper cheek- distribution segment: 25-30-35-40-45-50-75-100-150-200-270- done with the foot brake applicationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-20 mmwall strength: 2 mmbending radius min.: 10 mmbending radius max.: 75 mmbending speed: 35 mm/minpull up length of tube: 2000 mmControl: total power requirement: 7,5 kWweight of the machine ca.: 1,1 tdimensions: ca. 3100x1000x1400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: . tsquare measurement: 55 mmdiameter: 63 mmflat material: 170x20 mmtotal power requirement: kWweight of the machine ca.: tThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Stepless cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Footswitch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1100 kg

Key data: 3020 mm, 2 mm

with motor backgauge, numerical NC control, manual bending beam lowering, foot switch Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3020 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 3.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: green Total power requirement: 400 V Dimensions: 3800 x 1000 mm Machine weight: 4500 kg Upper beam stroke: 200 mm without roller scissors/ Opening width: 200 mm

Key data: 2500 mm, 2 mm

with foot switch, with simple control up to 6 bending angles, potentiometer preset, manual bending beam lowering, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2500 mm Sheet thickness steel: 2.5 mm without backgauge Colour: green Total power requirement: 16 A Space requirement: approx. 3400 x 1000 x 1600 mm Machine weight: 2000 kg without roller scissors Bending angle: 145 degrees Machine Number: 50/3

sheet width: 3050 mmplate thickness: 13 mmweight of the machine ca.: 8 tdistance between columns: mmtotal power requirement: kWdimensions of the machine ca.: mmotorized limit stopcutting crack adjustmentcutting angle adjustmentfoot switchTechnische Daten / technical details:Schnittlänge / max. cutting length 3050 mmSchnittleistung / cutting capacity 13 mmHinteranschlag / limit stop 1000 mmAntriebsleistung Motor/ drive capacity motor 22 kWGewicht der Maschine ca. / weight 8000 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4 mm, 1500 kg

Fasti Beading Machine Size 4 150x 4mm Power max projection 500mm hydr. Feeding of the upper roller by foot switch Right-left rotation Nkebmd R E Ijv Tqy Njgsw Stepless speed adjustment by handwheel Holder 60mm Weight approx. 1500kg with accessories Built in 1963 Space requirement approx. 1000x1000x1750mm

Qty. 1 Second-hand sheet metal processing machine Mfc.: Vernet Behringer Type: FG2005 CNC Built: 2012 Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm Max. section: 1340 x 1000 x 60 mm Electrical Cabinet Power supply: 3 x 380 V, 50 Hz, Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar

sheet width: 3150 mmplate thickness: 16 mmdistance between columns: mmweight of the machine ca.: 16,3 ttotal power requirement: kWdimensions of the machine ca.: mfoot switchmotorized arrester behindcutting angle adjustmentTechnische Daten / technical details:Schnittleistung / max. cutting capacity 16 mmmax. Schnittlänge / max. cutting length 3150 mmAnschlag / limit stop 1000 mmGewicht der Maschine / weight 16300 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25076 Specifications: - Driven unit fixed + rotating unit movable on rails - Total payload 3000 kg - Load capacity per container device 1500 kg - Container diameter 100 - 2500 mm Adjusting the container diameter - by swivelling the support arms, locking with plug-in bolts - Roll diameter 250 mm - Infinitely adjustable rotation speed approx. 60 - 1200 mm/min - Min. distance / max. distance fixed / movable unit - 1090 / 3200 mm Separate control cabinet Drive 400 V - Space requirement approx. W 4300 x H 900 x D 1600 mm - Total weight approx. 1200 kg

hole diameter in sheet thickness: Ø 30 in 12 mmhole diameter in sheet thickness: Ø 19 in 19 mmpressure capacity max.: 45 toweight of the machine ca.: 1.700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6200 mm, 1 mm

Motor scissors, 5 stop fingers, laser protection, with back gauge, Projection: 1000 mm, Colour: blue, Total power requirement: 3 kW, Insertion depth: 1000 mm, with roller shears, number of stands: 5 pieces, opening width: 200 mm, Bending angle: 145 degrees Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Machine Number: 8432

Specifications: - Max. working width 2020 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment pre-selectable 0 - 135 ° - Upper bolster clamping via eccentric lever + foot pedal - Largest opening width / stroke of the upper beam 100 mm - Height adjustability of the lower beam 25 mm - Space requirement approx. W 2950 x H 1200 x D 800 mm - Weight approx. 1450 kg

Coil weight: 2 x 2 ton Material width: 310 mm Coil exterior diameter: 1300 mm Expansion range: 380 - 460 mm Weight of machine approx.: 2,5 ton

Working hours laser on: 28.313 (15.05.2024) h Working hours beam on: 8.421 (15.05.2024) h Laser power: 6000 Watt Working range laser: 3048 x 1524 x 70 mm Max. steel: 25 mm Max. stainless steel: 30 mm Max. aluminium: 30 mm Max. copper: 12 mm Max. brass: 12 mm Length: 11000 mm Width: 6050 mm Height: 2565 mm Machine weight: 12000 kg Electrical connected load: 31 kW