sheet metal working used for sale (3,304)

MG s.r.l. MG4R3014Year of manuf. : 2017 Material thickness : 14 mm____________Description:Technical dataWorking length:3,100 mmBending capacity / Folding capacity:14 / 12 mmUpper roll diameter:290 mmLower roll diameter:270 mmSide roll diameter:210 mmMain motor power:7.5 kWMachine length:4,475 mmMachine width:1,460 mmMachine height:1,520 mmMachine weight:8,000 kgControl system:NEXUS TouchScreen DNCequipment:- NEXUS DNC control system with touchscreen interface:Programming and operation options::1. Manual mode – all movements controlled via joystick:2. Teach-in mode – saving of positions:3. Input of values for the rollers via the screen:Storage capacity for 300 programmes::- Rollers made from C45 alloy steel, induction-hardened:to 50–55 HRC::- Conical bending unit with both:side rollers set at an angle, lower roller set at an angle and:bearing with hardened guide roller::- Cali ...

used Schlebach roll forming machine, with hydraulic separation device in the outlet, Length measurement, unwinding device, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Sheet width 250 - 870 mm Sheet thickness steel 0.7 mm Sheet thickness aluminium 0.8 mm Sheet thickness stainless steel 0.5 mm Machine weight 420 kg Dimensions 1250 x 1470 x 1100 mm Total power requirement 400 V Color: Green Profile height 25 mm Belt width 290 - 880 mm Infeed width 290 - 880 mm Roll forming speed 11 m/min 50 Machine number 0392943

Schlebach Roll Forming Machine SPA Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Sheet width 300 - 880 mm Sheet thickness steel 0.7 mm Sheet thickness aluminium 0.8 mm Machine weight 500 kg Dimensions 1510 x 1475 x 1200 mm Total power requirement 400 V Colour blue/grey Profile height 25 mm Belt width up to 800 mm Inlet width up to 870 mm Roll forming speed 11 m/min Width adjustment 300 - 880 mm Machine number 95020141

Guillotine Shears Fasti 506-10-2.5 BJ 1991

Key data: 1000 mm, 5 mm

Dräco segment bending machine Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1000 mm Sheet thickness steel: 0.5 mm Sheet thickness aluminum: 0.8 mm Sheet thickness front: 0.5 mm Colour: grey Dimensions: 1500 x 600 mm Machine weight: 73 kg Upper bolster stroke: 65 mm without roller scissors without cutting device for cutting to length Opening width: 65 mm Bending angle (max.): 160 degrees Machine number: AGNU0055

Offered for sale is an Atlantic guillotine shear. Cutting length: 3000mm, max. cutting thickness: approx. 6mm. Documentation available. An on-site inspection is possible.

Key data: 6020 mm, 1 mm

with motorized scissors, with CNC depth stop, with 4-stop finger (tilt-turn finger), with 5 stand units, the machine is located in good and well-maintained condition Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Sheet thickness max. steel 1.25 mm Sheet thickness max. aluminium 2.00 mm Sheet thickness max. VA 0.80 mm Back gauge (max.) 1000 mm Color: Blue Total power requirement 16 A Dimensions 6900 x 1580 x 1870 mm Weight 3000 kg Upper beam stroke (opening width) 200 mm Sheet thickness adjustment yes, manual Bending angle (max) 140 degrees Roller shears yes, motorized Number of stands 5 pieces Machine number 9538-10

Offer 26186 Technical data: - Max. working width 1275 mm - Max. material thickness (with 40 kg strength) 3 mm - Front angle stop - Front material supports approx. 300 mm - Back gauge adjustable by hand 5 - 650 mm - Stroke rate approx. 32 /min - Cutting angle 1.9 ° - Preselection single stroke / continuous stroke - Drive 400 V / 3.0 kW - E – footswitch - Protective grille at the rear of the machine - Space required including back gauge, without front support arms - approx. W 1500 x H 1150 x D 1450 mm - Weight approx. 1200 kg

Offer 22186 Technical data: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Solid material up to approx. 30 mm - Max. bending angle 180 ° - Bending radius 2 x D - Drive 400 V / 1.5 kW - Space requirement approx. W 4500 x H 1400 x D 1000 mm - Weight approx. 600 kg - with - Digital bending angle display + bending angle fine adjustment - Mandrel bending device 3.0 m. with hydr. Withdrawal - Bending tools 20 R 60 ; 22 R 66 ; 25 R 75 mm - 25 R 50 ; 38 R 114 mm - various bending mandrel e 3000 mm

Max. pressing force: 400kN, stroke rate: 100-1200/min, connected load: 18kW, compressed air connection: R 1/2inch, 6-10bar, adjustable strokes: 13, 15, 19, 25, 32, 38, 44, 51, 57mm, max. fixed stroke (special version): 57mm, ram height adjustment: 60mm, tool installation height: 4 Mm 677, max. width of tool installation opening: 690mm, max. strip passage width: 190mm, strip feed height above clamping plate: 60-140mm, bed opening: 640x220mm, lower clamping plate: 4 Mm 671, upper clamping plate: 4 Mm 672, installation dimensions: 4 Mm 667, length: 1695mm, width: 2185mm, height: 3010mm, weight with feed unit: 6.37t. Equipment: drive control, tool clamping plate, installation dimensions, upper clamping plate, hand protection device, BBV 41.202/150 strip feed unit, strip-end monitoring, transport and lifting device, complete documentation, installation, operating and maintenance instructions  ...

material width: 100 mmmaterial thickness: 1 mmcross cut: ? total power requirement: 0,75 kWweight of the machine ca.: ? tdimensions of the machine ca.: ? mSheet Cutting MachineWorkspace: 100 x 1Drive: 0,75The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: - mmsquare edge steel: - mmL-beam: - mmtotal power requirement: 7,5 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 2,212,35 mdiv. punches and diesFoot switch Spare bladeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting capacity: - mmthroat: - mmround blank diameter max.: 500 mmround blank diameter min.: ? mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stroke: 15 mmpressure: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Separating tool, punching tool, punch, punch die, punch stamp, die holder -Punch tool: Intermediate block 3 pieces -Hole spacing: 45 x Ø14 mm -Dimensions: see photos -Submission/Price: complete -Dimensions each: 86/40/H40 mm -Weight: 0.8 kg/pc.

Separating tool, punching tool, punch, punch die, punch stamp, die holder -Punch tool: Notching tool -Type: unfortunately without a type designation -Dimensions: see photos -Dimensions: 200/120/H150 mm -Weight: 13 kg

Separating tool, punching tool, punch, punch die, punch stamp, die holder -Punch tool: Notching tool -Type: Size 1 1/4 -Dimensions: see photos -Dimensions: 270/180/H235 mm -Weight: 25.4 kg

Separating tool, punching tool, punch, punch die, punch stamp, die holder -Punch tool: Intermediate block -Bore: Ø 100 mm / Ø 25 mm -Dimensions: see photos -Dimensions: 205/180/H90 mm -Weight: 8.2 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die, slot die, punch and die set slot die -Die cutting set: punch and die set, slotted die -Size: 20.0x40.0 mm -Matrix: 20.7x40.7 mm -Transport dimensions: Ø 90 x 80 mm -Weight: 2.1 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die, slot die, punch and die set slot die -Die cutting set: punch and die set, slotted die -Size: 18.0x40.0 mm -Matrix: 18.7x40.7 mm -Transport dimensions: Ø 90 x 80 mm -Weight: 2.1 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die, slot die, punch and die set slot die -Die cutting set: punch and die set, slotted die -Size: 13.0x40.0 mm -Matrix: 13.7x40.7 mm -Quantity: 2x punching tools available -Price: per piece -Transport dimensions: Ø 90 x 80 mm -Weight: 2.1 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Die cutting punch: Punch and die Ø 45 mm -Transport dimensions: Ø 90 x 80 mm -Weight: 2.2 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Die: Punch and die Ø 46 mm / 1 13/16 -Transport dimensions: Ø 90 x 80 mm -Weight: 2.2 kg

Cutting blades, replacement blades for guillotine shears, replacement cutting edges, cutting knives, shear blades, flat steel blades for profile steel shears, lever shears, sheet metal knives -Manufacturer: Peddinghaus, 3 cutting blades for profile steel shears 210/16 210 Super 16, unused -Zg. No.: 44085 510 00 Cutting length: 260 mm -Hole spacing: 140 mm / 2x M20 see photos -Submission/Price: complete -Dimensions: 280/18/H70 mm -Weight: 2.6 kg/pc.

Offer 26181 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 10 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 15 pcs - Mot. – Back gauge with positioning control 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 7500 kg - with: - E-foot switch - Cut line illumination

Key data: 3100 mm, 2 mm

Schechtl MAN 310 CNC folding machine with touchscreen. You will receive a proper invoice with VAT.

Cidan CNC guillotine shears in top condition (please note, the matching shears are also available) with rotatable upper beam 3m x2.5mm – with CNC control and depth stop, The scissors are in very good technical and optical condition, all bearings are perfect. The machine comes from a small business/first owner and is accordingly well maintained and maintained. Ideal for tinsmiths, roofers, carpenters, metalworkers or workshops looking for a precise and reliable bending machine.

Key data: 3100 mm, 2 mm

Cidan CNC swivel bending machine in top condition (please note, the matching scissors are also available) with rotatable upper beam 3m x2mm – top condition with CNC control and depth stop, The folding machine is in very good technical and optical condition, all bearings are flawless. The machine comes from a small business/first owner and is accordingly well maintained and maintained. The swivel upper beam has a goat's foot rail with segmented inserts and a sheep rail.

We are selling a Schlebach EHA here. The machine works perfectly. Prices net. Delivery possible. You will receive a proper invoice with VAT. Indicated price net

We offer you here a Schlebach RBM round sheet forming machine for pre-profiled scrapers Immediately ready for use, the Porsche among the profiling machines. Delivery possible Net price plus VAT There is an invoice with VAT shown If you have any questions, please contact us at 0160/7838365