sheet metal working used for sale (3,304)

Press brake manufactured in 2004. This Salvagnini Performer / P2 features a tool set in good condition considering its age, with one defective threading segment that does not impede production. The upper edge cutter has been replaced. If you are looking to get high-quality bending capabilities, consider the Salvagnini Performer / P2 machine we have for sale. Contact us for further details.

Maschinennummer: 384, Leistungsbedarf: 4 kW, Spannung: 380 V

BAYKAL 3100 X 6 Guillotine ShearManufacturerBAYKALModel3100 X 6Year2000ConditionuntestedLocation35614 Aßlar DELot17

Additional technical specifications:• Walzendurchmesser jeweils: 100 mm

The tube processing machine is mounted on a mobile base frame.

Incl. matching workshop drawer cabinet with punches and accessories.Attention: the machine can be transported on a standard truck!Additional technical specifications:• Cutting force: 150 kN• max. stroke: 340 rpm• largest standard round tool: diameter 38 mm• largest standard square tool: edge length 25.4 mm• max. positioning speed axis parallel simultaneous X + Y axis: 40 m/min• max. rotation speed rotatable tools: 360°/sec• Number of tables / table dimensions: 2 x 1130 x 1000 mm

This 6-axis TRUMPF TruLaser Robot 5020 was manufactured in 2011. It features a TRUMPF TruDisk 4002 laser source and includes essential components such as an articulated robot arm, rotary/tilt table, and a chiller unit. If you are looking to get high-quality laser welding capabilities, consider the TRUMPF TruLaser Robot 5020 machine we have for sale. Contact us for further details.

In metal box.

Punching force: 500 kN Stroke: 32 mm Stroke adjustable: 10 - 32 mm Stroke rate: 35 /min Normal punching device: 31 Ø in 12 mm with punching table: 24 Ø in 16 mm with special punching device: 58 Ø in 7, 65 Ø in 6, 90 Ø in 4 and 130 Ø in 3 mm Hydraulic drive: 380 V, 4 kW Weight: 1400 kg Space requirement: 1200 x 1100 x 1680 mm The machine has only 303 operating hours!

Key data: 44 t, 1600 mm, 1530 mm

Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!

Key data: 44 t, 1600 mm, 1530 mm

Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. Ibjbmlszymb Seurhasb 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!

Offer 26234 Technical data: - Sheet metal and flat steel shears, knife length 200 mm cuts flat steel up to 150 x 15 mm - or up to 190 x 10 mm - Profile steel bar shears cuts - angle steel up to 100 x 10 mm - Round steel up to 32 mm - Square steel up to 30 mm - Notching device with triangular notch notch - Hole punch - punching force 500 KN - Stroke 10 to 28 mm - Projection 155 mm - Holes in steel up to 27 mm Ø in 14 mm - or up to 31 mm Ø in 10 mm - Drive 400 V / 4 kW - with: - Footswitch - E. contact stop - Various punches with dies - Space requirement approx. W 650 x H 1750 x D 960 mm - Weight approx. 850 kg

This 3-axis TRUMPF TruLaser 3030 (3.2 kW) was manufactured in 2014. It features a substantial travel range of 3000 mm on the X-axis and 1500 mm on the Y-axis, making it suitable for various cutting applications. The machine includes a TRUMPF LoadMaster automated sheet loading system for enhanced efficiency. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details.

Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm -Roller diameter: 55 mm -Dimensions: 1670/580/H1150 mm -Weight: 156 kg

Press brake, bending machine, swing bending machine, die bending machine -Swivel bending machine: with opening upper jaw for completely closed bent sheet metal profiles -Manufacturer: LOTZE Type HZ 2500/3 -Drive: mechanical, cam control semi-automatic / bending angle preselection -Max. working width: 2500 mm -Max. sheet thickness: 3 mm -Max. intermediate dimension: 470 mm -Connected load: 6 kW Accessories: incl. bending tools/stops, see photos -Dimensions: 4150/1110/H1970 mm -Weight: 5040 kg

Key data: 3050 mm, 20 mm, 800 mm

Hydraulic Sheet Metal Shear / Hydraulic Guillotine Shear Make: Steiner Type: HTS 30/20 Year of manufacture 1978 -Cutting length: 3050 mm -Cutting thickness: 20 mm -Back gauge: 800 mm, via handwheel - Motor power: approx. 30 Kw -Spare blade Basic machine: 4650 mm long, 2610 mm wide, 3200 mm high Weight: approx. 27,000 kg -Mechanical, in good condition- -Optical, in good condition- Hydraulics leak slightly no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense

Hydraulic press brake Make: Steiner Type: 25/40c Weight: approx. 26 tons. Year of Make: 1984 Technical data: -Compressive force: 2600 KN = 260 tons. -Edge length: 4050 mm -Stand passage: 3050 mm -Table width: 300 mm -Table height: 850 mm -Projection: 300 mm with controlled rear stop with wiring diagram – hydraulics with wiring diagram – electrics Die length: 4050 mm Bending bar: 4050 mm in different lengths Stroke: 240 mm -Drive power: 22 kW -Hydraulic cylinder: Ø 240 mm Press brake is not used much, but is fully functional and in operation -optically good condition- -technich good condition- Hydraulic press brake with CNC control -Make: Cybelec - Type: PC-80/800 -was installed in 2005 -Control is fully functional and in operation no guarantee, no return, no warranty Machine is still in commercial use and can be vi ...

Swing cut shears Make: Simat Type: SST 3010 Year of Make: 1990 Cutting length: 3010 mm Sheet thickness: 10 mm -Cutting line lighting -Adjustable cutting gap - Motor power: approx. 19 kW -Backgauge Length: 3750 mm Width: 1700 mm Height: 1530 mm Weight approx. 8700 kg Return stroke by nitrogen cylinder Nitrogen cylinder: resealed in 2024 no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense.

Key data: 100 t

Hydraulic flat, bar. Profile and angle steel shears with notching device and hole punch Make: Muhr + Bender (Mubea) Model No.: HIW 1000 Year of Make: 1990 -Punching force: 1000 KN = 100 tons. -Hole punch: Ø 40 mm in 22 mm material -Angle steel shears 90°: 160 x 16 mm -Flat steel shears: 600 x 15 mm -Notching device: sheets 13 mm Weight: 2550 kg Visually good condition Technical good condition Accessories: Punches and matrices see photo no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense

Punching force: 300 kN Projection: 610 mm Quick-change device Support table with stop and folding cam Range of tools is included in the price Weight: 1,300 kg

Tube cutting machine manufactured in 2020. This Bodor X2260 features a powerful 3 kW laser and is equipped with a CNC control panel interface, automatic chuck system, and a dedicated extraction system. It also includes a tube support roller and conveyor loading bed for enhanced efficiency. If you are looking to get high-quality tube cutting capabilities, consider the Bodor X2260 machine we have for sale. Contact us for further details.

This 5-axis TRUMPF TruLaser Cell 7040 was manufactured in 2008. It features a powerful 6 kW fiber laser and a spacious table with dimensions of 3900 x 1500 mm. The machine is equipped with advanced Siemens 840D control for precision cutting. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser Cell 7040 machine we have for sale. Contact us for further details.

This 3-axis EXPERT SYSTEMTECHNIK cutExpert variojet was manufactured in 2016. It features a maximum material thickness capacity of 100 mm, allowing for versatile cutting applications. The machine includes an Uhde HPS 4022 high-pressure pump, designed for a discharge capacity of 2.3 l/min and a pressure of 4000 bar, enhancing its cutting efficiency. If you are looking to get high-quality waterjet cutting capabilities, consider the EXPERT SYSTEMTECHNIK cutExpert variojet machine we have for sale. Contact us for further details.

Plasma cutting machine manufactured in 2007. This MicroStep SPLR-P features a Kjellberg HiFocus 160i PLUS plasma power source, offering a cutting current range of 10A to 160A. It includes an integrated CNC operator terminal for precise control and a filtration system by Donaldson Torit DCE. If you are looking to get high-quality plasma cutting capabilities, consider the MicroStep SPLR-P machine we have for sale. Contact us for further details.

Slitting line Stainless Steel Strip width.. 500 mm Belt thickness... .02-3.0 mm Coil weight. 5 to. Speed 150 m/min. Minimum belt width.. 13 mm Strip number 10 Coil I Dia. 400 / 500 mm Shaft diameter.. 145 mm Control... Siemens S 5 Facility consists of: -Coil car -Uncoiler + Snubber roll - Pieler table -Paper Wrapper -Edge controll system -Pinch roll -Scrap shear - PVC coating unit -Side guide 2+2 rolls -Slitting head -Roll table -Scrap winder -Tension unit -Recoiler, separator shaft -Paper wrapper -Turnstile 2 arms -Electrical & Automation system -Camera system

Strip width... 650 mm Band thickness 0.2-3.0 mm Coil weight.. 5 tons. Coil I Diam. . 400/500/600 mm Coil A Dia. 1,500 mm Yield strength... 700 N/mm2 Strip width.. 10 - 250 mm Speed 150 m/min. Working direction.. right/ left Facility consists of: -Decoiler -Belt removal wedge -Scissor breasts 2 pcs. -Scrap wrapper -Band brake -Brake rollers 2 pcs. -Reel -Separation arm -2 control panels -Electrical control cabinets -Central hydraulics -Tools Plant dismantled in workshop

used Herburger roll forming machine, infinitely variable adjustment via Quickset system from sheet width 280 – 840 mm, : latest technology, hardened and with Drive elements in the rollers (rubber inserts) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Sheet width 280 - 840 mm Sheet thickness steel 0.8 mm Sheet thickness aluminium 1.0 mm Sheet thickness stainless steel 0.6 mm Machine weight 290 kg Dimensions 1100 x 1100 x 950 mm Total power requirement 230 V Colour: grey/anthracite Profile height 25 mm Machine number A 24 15 34

Lg.Nr. 21275 Hand Folding Machine Technical data: - Max. working width 1030 mm - Max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - lockable with end stop - Upper beam is operated with side hand crank - Max. stroke upper beam 120 mm - Max. adjustment bending beam 45 mm - Bending process is supported by eccentric weight - Space requirement approx. W 1750 x H 1120 x D 450 mm - Weight approx. 620 kg