sheet metal working used for sale (3,287)

sheet width: 2600 mmplate thickness: 5 mmrear stop: 1000 mmcutting angle: 1°06 °no. of strokes: 45 Hub/minvoltage: 380 V / 50 Hztotal power requirement: 5,5 kWweight: 4500 kgdimensions of the machine ca.: 3600 x 2200 x 1600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. cutting length: 3050 mm Max. sheet thickness: 6 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cut edge lighting Hydraulic shear angle adjustment Knife sharpened Weight approx. 6500 kg

Max. bending length: 2540 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail ground Weight: 3400 kg

Max. punching force: 100 kN Max. stroke: approx. 50 mm (adjustable via clamping lever) Stroke actuation via footswitch Weight: approx. 600 kg

Offer 25360 Specifications: - Sheet metal and flat steel shears, knife length 175 mm - Cuts flat steel up to 100 x 15 mm - or up to 150 x 10 mm - Profile steel bar shears - cuts - angle steel up to 80 x 8 mm - Round steel up to 32 mm - Square steel up to 30 mm - Hole punch - punching force 360 KN - Stroke 10 to 32 mm - Projection 155 mm - Perforates in steel up to 20 mm Ø in 14 mm - or up to 27 mm Ø in 10 mm - Drive 400 V / 3 kW - Footswitch - Space requirement approx. W 800 x H 1600 x D 855 mm - Weight approx. 600 kg - various punches + dies

Bending tool, bending tool, die, upper blade, upper tool, straightening tool -Bending tool: Length 1760 mm -Tool angle: 83° -Dimensions: see drawing in the photos -Dimensions: 1760/28/H144 mm -Weight: 44.6 kg

Guillotine shear by Eisen u. Hammerwerk G.m.b.H., capacity: 10mm, working length: 3000mm, year of manufacture: 1980. An inspection can be arranged by appointment.

Mechanical press/eccentric press by Stankoimport, model: 2225 (СТАНКОИМПОРТ Модель 2225). Material capacity: sheet thickness/width 18/190mm, max. tensile strength 500MPa. An inspection can be arranged by appointment.

An electric guillotine shear L. Schuler (Göppingen) is available. Working width: 1000mm, max. sheet thickness iron/steel: 2.5mm/2mm, flywheel speed: 100rpm, power requirement: 4HP. An on-site inspection is possible.

chamfer lenght: Gesamt ca. 1750 mmPacking: ca. 1900 x 200 mmShipping weight: 550 kg7-piece bending toolIndividual lengths approx. 100 / 155 / 180 / 245 / 255 / 300/ 510Profile approx. 20 x 20 mmHeight approx. 145 ( 165 ) mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Other AMNC-3i Travel X/Y/Z [mm] 3000/1500 Specifications Punching Machine EMK-3612MII (58) Punching force 300 kN Positioning accuracy ± 0.1 mm Number of tool stations 58 Machine Frame Bridge Frame Machine Table Type: Brush Table Punching Drive Servo-Electric Dual Drive Travel area (X x Y) 1525 x 3050 mm Control AMNC-3i (21.5" screen size) Equipment Punch & Forming Function Good parts flap Scrap conveyor belt system Dimensions Length 5436 mm Width 6212 mm Height 2342 mm Weight 21500 kg

Large working width: 3050 mm for sheet metal (with a strength of 45 kg) up to: 6 mm Clear stand width: 3400 mm Cutting angle adjustable by hand: 0.5 - 3° Number of hydraulic hold-downs: 18 Stroke rate approx.: 9 - 17 /min Stop adjustment: 1000 mm Hydraulic drive: 380 V, 7.5 kW Space required incl. back gauge: 3600 x 1800 x 1580 mm Weight: 5200 kg

Punching force: 350 kN (holes e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shear Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side with stop cam Range of tools is included in the price

Offer 25311 Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 /min - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Footswitch - Space requirement approx. W 1300 x H 1250 x D 1300 mm - Weight approx. 800 kg - Mobile undercarriage

Offer 25321 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Stepless cutting angle adjustment 30 - 140 ° - hydr. Hold - Stroke rate 28 1/min - Depth stops with angle adjustment - Table height approx. 920 mm - Drive 400 V / 4.0 kW - E. footswitch - Space requirement approx. W 1050 x H 1350 x D 1200 mm - Weight approx. 950 kg

Offer 25321 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Stepless cutting angle adjustment 30 - 140 ° - hydr. Hold - Stroke rate 28 1/min - Depth stops with angle adjustment - Table height approx. 920 mm - Drive 400 V / 4.0 kW - E. footswitch - Space requirement approx. W 1050 x H 1350 x D 1200 mm - Weight approx. 950 kg

Offer 25376 Specifications: - Max. cutting width 3050 mm - Max. cutting capacity at 45 Kp/mm² 13 mm - Hydr. Cutting angle adjustment - Number of hold-downs 13 pcs - Front angle stop - 4 pieces of front support arms -Mot. Positioning-controlled backgauge 10 - 1000 mm - Cut line illumination - Rear space protection with side grilles + light barrier - E - Footswitch - Drive 400 V / 20 kW - Space requirement approx. W 4350 x H 2100 x D 2200 mm - Weight approx. 8.5 t

Max. bending length: 1270 mm Max. sheet thickness: 1.75 mm steel Motorized upper bolster adjustment via foot switch Automatic backgauge

Max. bending length: 3200 mm Max. sheet thickness: 4 mm steel Motorized backgauge with hinged cams up to 2500 mm with stop extension (disassembled) Motorized bending beam adjustment Multibend 9001 controller Segmented upper beam tool with automatic tool clamping (height 100 mm) Operating instructions Weight: 5800 kg

A guillotine shear Durma is available. Working width: 3100mm, max. sheet thickness: 13mm, stroke: 125mm, stroke rate: 13/min, oil capacity: 330l, machine dimensions X/Y/Z: approx. 4250mm/3850mm/2200mm, weight: approx. 11700kg. An on-site inspection is possible.

used Forstner slitting line, control left, 0-line right, with motorized cross shear, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run was carried out. Working width: 250 - 1250 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminium: 1.5 mm Colour: blue/yellow Total power requirement: 400 V Machine weight: 775 kg Dimensions: 1500 x 2200 x 1500 mm Coil weight: 2 t without straightening rollers Number of blades: 5 pairs Knife shaft diameter: 100 mm Speed: 25 m/min without bevel cut Coil width (max.): 1250 mm Maschinennummer/Machine number 102728 MST

Offer 25328 Specifications: - Max. cutting width 3200 mm - Max. cutting capacity at 45 Kp/mm² 12 mm - Stand projection 175 mm - Cutting angle 1.48 ° -one. Cutting gap adjustment - Number of hold-downs 13 pcs - Stroke rate up to 10 1/min - Front angle stop approx. 1100 mm - 2 pcs. front support arms approx. 1100 mm -Mot. Back gauge with positioning control up to 1000 mm - Rear space protection with light barrier - Cut line illumination - Working height 860 mm - E - Footswitch - Drive 400 V / 19.5 kW - Space requirement approx. W 4150 x H 2150 x D 2300 mm - Weight approx. 8.5 t

Ref. No. 00891 Name of the Tube Laser Cutting System Manufacturer: BLM Adige Model LT 652/B Year of construction 2002 Laser power 2000 watts Loading length Unloading length Loading length 6500mm and unloading length 3500mm. In 2024, 40,000 euros were invested Operating hours 3 shifts Computer 127,653h Heating HF tube 62.850 h High voltage 119,453 h From order confirmation at the time of purchase Lasertube LT652 Automatic feeder for pipes between 3200 and 6500mm Fully automatic pipe support and unloading device for pipes up to 4500mm Siemens Sinumerik 840D control system Teleservice incl. modem CO2-Slab-Laser Model DC020 Kompakt, Fabr. Rofin Sinar Hamburg Integration RF DC020 Compact Laser Cooling Unit Fine dust filter, Fabr. Donaldson Torit Universal AK-HP Cutting Head, Fabr. Precitec Gaggenau Precitec Interchangeable Cassettes AK-HP 5" HP ZNSE 5"  ...

Machine Type: Punching/Nibbling Machine Manufacturer: EDEL Type: Micromat 205 Year of manufacture: coming soon Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-EDE-0925 DESCRIPTION We offer you a used punching / nibbling machine from the manufacturer EDEL. Available now Technical data and accessories will follow! Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Bending length / working length 2,500 mm Press force / bending force 1,500 kN (≈ 1500 kN) Max. sheet thickness (steel) approx. 2.0 mm Max. sheet thickness (aluminium) approx. 3.0 mm Max. sheet thickness (stainless steel / higher tensile strength) approx. 1.25 mm Max. bending height approx. 300 mm (depending on model) Power / Capacity (Electrical) 24 kW Machine dimensions: 4,050 × 1,600 × 2,400 mm Weight ~ 13,000 kg

FOBA FD84S Sensor for YAG Laser Marking System For sale is a used FD84S sensor from the manufacturer FOBA. The sensor is intended for use in YAG laser marking systems. Technical details: Manufacturer: FOBA Model: FD84S/S50 Design: Sensor / Laser Control Component Laser class (system use): 4 Wavelength: 1064 nm Laser power (system use): 70 W Pulse power: 10 kW Pulse duration: 70 ns Application: Spare part / component for FOBA laser marking systems Condition: Used, functional Buy FOBA FD84S sensors and other items at low prices – Here you can buy goods from the professionals for the professionals – In our SHOP you will find more attractive offers.

Travel: X-axis (mm) 3060 Y-axis (mm) 1530 Z-axis (mm) 160 Max. dimensions sheet metal (mm) 3048×1524 Control: Sinumerik 840D SL Power of laser: 2000W Max. sheet thickness: steel 12 mm Stainless steel 6 mm Aluminium (AlMg3) 6 mm Copper 3 mm Brass 3 mm with loading and unloading system for the sheet metal

BPR BA 35 CNC Three-roll ring bending machine, hydraulic MACHINE AS GOOD AS NEW Shaft diameter: mm 35 Roller diameter: mm on request Shafts made of resistant steel, hardened and ground Drive motor kW 1.1, 50 Hz Engine Hydraulic Pump kW 3 Shaft revolutions (variable) 0-30 rpm Working position horizontally and vertically Separate control panel External dimensions 740 x 1020 x 1110 mm Dimensions control panel 600 x 710 x 1120 mm Weight 490 kg Hydraulic regulation of the side roller Three driven rollers with a smooth surface Electronic Control BPR Sampling CNC Hydraulic cylinder compressive force 5500 kg Working pressure 190 bar

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 5 pieces -Profile diameter: 18 to 44 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 255/350/H55 mm -Weight: 11.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 9 pieces -Profile diameter: 27 to 60 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 655/350/H120 mm -Weight: 42 kg