sheet metal working used for sale (3,349)

Offer 26230 Technical data: - Max. load capacity 3000 kg - Max. clamping diameter 1700 mm - Face plate diameter 530 mm - Rotary movement electr. infinitely variable 0.1 to 2.7 rev/min. - Right + Left – Run - E. - Footswitch - Welding current transmission approx. 600 A - Drive 400 V / 0.2 kW - Space requirement approx. W 1000 x H 1250 x D 1200 mm - Weight approx. 550 kg

Offer 26300 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Mot. Back gauge 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - with: - E. foot switch - Cut line illumination

Offer 26307 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Mot. - Back gauge 10 - 750 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 9 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space required including back gauge, without front support arms - approx. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - with: - E. - Foot - Switch - Cut line illumination

Profile cassettes and cutting dies for a roll forming line used in the production of trapezoidal sheet profiles. Two different profiles can be produced: H = 158 mm × W = 750 mm H = 153 mm × W = 840 mm Please refer to the photos for further details. Material Capacity Aluminum and steel Material thickness: 0.75 - 1.5 mm Scope of Supply Cassette 1 for Profile 153 and 158 Cassette 2 for Profile 153 and 158 Cassette 3 for Profile 153 and 158 Cassette 4 for Profile 153 Cassette 4 for Profile 158 Cassette 5 for Profile 153 Cassette 5 for Profile 158 Cassette 6 for Profile 153 Cassette 6 for Profile 158 Cutting die for Profile 153 Cutting die for Profile 158 All tooling comes from ongoing production and is being offered for sale due to a product change within the manufacturing operation. Please note: The offer includes the profile cassettes and cutting dies onl ...

Offer 26213 Technical data: - Max. working width 1030 mm - Max. material thickness at 40 kg/mm² strength 2 mm - Adjustable back gauge 10 - 500 mm - Front angle stop - Front support extendable approx. 400 mm - Space requirement approx. W 1250 x H 1050 x D 750 mm - Weight approx. 700 kg

Cassettes + knives for roll forming line for the production of trapezoidal sheets. Two different profiles can be produced. H = 158 mm x W = 750 mm H = 153 mm x W = 840 mm See photos for details. Workable sheet metal : Alu + steel in 0.75 - 1.5 mm Composed of a total : - Cassette 1 for Profile 153 and 158 - Cassette 2 for Profile 153 and 158 - Cassette 3 for Profile 153 and 158 - Cassette 4 for Profile 153 - Cassette 4 for Profile 158 - Cassette 5 for Profile 153 - Cassette 5 for Profile 158 - Cassette 6 for Profile 153 - Cassette 6 for Profile 158 - Knife for profile 153 - Knife for Profile 158 Everything comes from ongoing production, the sale is due to a product change. It is only the cassettes + blades, without drives, reel, scissors, etc. Total weight : approx. 86,000 kg

Offer 26238 Technical data: - Max. working width 3190 mm - Max. material thickness at 40 kg/mm², strength 6.3 mm - Cutting angle 1.2 ° - CNC - Cutting gap adjustment - Strokes 30 to 64 1/min - Stand projection 100 mm - Table height approx. 800 mm - Number of hold-downs 16 pcs - Back gauge 5 - 1000 mm - 3 pieces front support arms 1500 mm - E – Footswitch - Rear tilting roller table - Drive 400 V / 18.5 kW - Space requirement approx. W 3900 x H 1800 x D 2100 mm - Weight approx. 6800 kg - with : - CNC control RAS system - Rear tilting roller table / sheet metal hold-up - Rollable material collection container - Electronic rear space protection / light barrier

sheet width: 1640 mmplate thickness: 3,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,60 tdimensions of the machine ca.: mManual and automatic bending cycles possibleBending angle adjustable via potentiometerClamping beam lift and material thickness selectable via switchesManual backgauge with spring fingersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,60 tdimensions of the machine ca.: mManual backgauge up to 550 mmSide gauge and table extensionsSharpened bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press brake, bending machine, swing bending machine, die bending machine -Manufacturer: LOTZE Swivel bending machine with segmented upper jaw type 1512000 3.5 -Drive: mechanical, cam control semi-automatic -Max. working width: 2000 mm -Max. sheet thickness: 3.5 mm -Max. intermediate dimension: 180/280 mm -Accessories: 12 segmented upper cheek splints, 3 upper cheek splints -Connected power: kW -Dimensions: 3350/1250/H1600 mm -Weight: kg

Max. bending length: 3240 mm Max. sheet thickness: 4 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Central lubrication Instruction manual

Key data: 1020 mm, 2 mm

Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Good condition Weight: 400 kg

Key data: 1640 mm, 3 mm

Max. bending length: 1640 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via switches Manual backgauge with spring fingers Weight: approx. 1600 kg

This 3-axis Hypertherm HPR130XD plasma cutting machine was manufactured in 2013. It features a power output of 130A with a 100% duty cycle, and operates at a voltage input of 400V. The included TEKA air extraction unit has a volumetric flow rate of 7500 m³/h and a motor power of 7.5 kW. If you are looking to get high-quality plasma cutting capabilities, consider the Hypertherm HPR130XD machine we have for sale. Contact us for further details.

Press brake manufactured in 2003. This ATLANTIC HPES-40-135 features a capacity of 135 T and operates at a voltage of 380 V, 50 Hz. It includes a Robosoft ATS 550 control system and has a total weight of 2650 KG. If you are looking to get high-quality bending capabilities, consider the ATLANTIC HPES-40-135 machine we have for sale. Contact us for further details.

This 3-axis TRUMPF TruLaser 3030 incl. Liftmaster was manufactured in 2007. It features a powerful 4,000 W CO₂ laser with a maximum workpiece weight of 900 kg and a maximum simultaneous speed of 140 m/min. The machine offers an impressive X-axis travel of 3,000 mm and Y-axis travel of 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details.

Key data: 1020 mm, 1 mm

used RAS 3-roll round bending machine, with wire inserts, seam groove, transmission gear, Adjustment of the rear roller from the front with scale, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1020 mm Sheet thickness max. steel 1.25 mm Farbe/Colour grün Weight/Weight 150 kg Dimensions 1300 x 600 x 1100 mm Number of round rollers 3 pieces Roller diameter 56 mm Machine number: 316/10

Key data: 2020 mm, 1 mm

used Teko manual bending machine Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 2020 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.70 mm Colour: green Dimensions: 630 x 660 x 1155 mm Machine weight: 220 kg Upper beam stroke: 140 mm without roller scissors Bending angle (max.): 120 degrees Machine number: 163/141

Key data: 1030 mm

with wire inserts, conical rounds, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1030 mm Sheet thickness max. steel 0.6 mm Farbe/Colour grün Weight/Weight 220 kg Dimensions 1290 x 600 x 1050 mm Lower roller diameter 40 mm Top roller diameter 40 mm Number of round rollers 3 pieces Machine number 169

Key data: 1020 mm, 1 mm

in good condition, wire inserts, rebate groove Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1020 mm Sheet thickness max. steel 1.0 mm Farbe/Colour grün Weight/Weight 250 kg Dimensions 1700 x 500 x 1160 mm Number of round rollers 3 pieces Roller diameter 65 mm

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (right) Max. feed length: 3000 mm Pneumatic parking brake

For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching line for automated processing of strip material directly from the coil. The system is particularly suitable for the cost-effective production of perforated sheets, mounting plates, mounting rails, ventilation components and customer-specific stamped parts in medium and large quantities. Direct processing from the coil significantly reduces material consumption, set-up times and unit costs. LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system works with standardized thick-turret tools and enables highly productive production processes. Technical data Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine Type: CNC Coil Punching Machine/Punching Line Control: CNC, Siemens Simostar 370 Coil Processing Coil inner Ø: 508/610 mm Coil out ...

Max. saw blade diameter: 500 mm Max. feed length: single 650 mm (3 fold feed possible) Pneumatic material feed Pneumatic saw feed Minimum quantity spraying device Unit counter with automatic switch-off Digital display of feed length Cutting height can be quickly adjusted via 4-stage selector switch Including chip extraction 800 kg

Max. bending capacity: 220 kN (22t) Tool height: 120 mm Weight: approx. 500 kg

For sale is a new ROUNDO PASS 205 4-roll sheet metal bending machine from the Swedish manufacturer ROUNDO AB. The machine was delivered in 2011 and has a working size of 3000 × 4 mm. Machine data: Manufacturer: ROUNDO AB, Hässleholm, Sweden Model: PASS 205 wCNC² Machine Type: 4 Roll Sheet Metal Bending Machine Machine No.: 06764 Year of delivery: 2011 Operating hours: 216 h Capacity: 3000 × 4 mm Control: CNC - Hydraulic roller adjustment - Top roll diameter: Ø 205 mm - Pinch roll diameter: Ø 205 mm - Side roll diameter: Ø 160 mm - Motor power: 5.5 KW Minimum bending diameter: approx. 225 to 290 mm (strongly dependent on sheet thickness and material properties; usually 1.1 to 1.4 times the upper roll diameter) Weight: approx. 5,500 kg Features & Features: -Modern CNC control for precise and reproducible bending processes -Programmable bending programs  ...

CNC punching machine manufactured in 2007. This AMADA EMZ 3610 NT features a press force of 300 kN and a travel distance of 2500 mm in the X-axis and 1525 mm in the Y-axis. It has a maximum material thickness capacity of 4.5 mm and a stroke rate of 1000 strokes per minute. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for further details.