other metal working machines used for sale (11,509)

Broaching machine Karl Klink Technical data can be found in the photo

Guild Master and Knoll Deep Hole Drilling Machine Technical data can be found in the photos

Shot blasting machine Working pressure: 0.6 MPa, weight: 7,622 kg, modernized by: Bogdan Gacioch. The machine is complete and functional.

NOVICK AF1300 die-sinking EDM was built in 2012 in China by Novick Digital Equipment Co., Ltd. The machine is used to produce parts with complex geometries that have applications in, among others, aviation and aerospace industries. The machining process is performed by means of electrical erosion, which minimises or completely eliminates the need for other secondary processes, such as polishing. The combination of a full closed-loop control system and dual feedback compression, in turn, guarantees exceptional machining accuracy in even the most demanding applications. The NOVICK AF 1300 sinker EDM weighs 2300 kg. Technical specifications of the NOVICK AF 1300 die-sinking EDM - feed in the X/Y/Z axis: 520/300/300 mm - work table dimensions (L x W): 600 x 400 mm - generator: NOVICK 560F - power: 10 kVA - power supply: 3x 380 V; 50/60 Hz - weight of the NOVICK AF1300 machine: 2300  ...

Gantry type longitudinal planer SN: 185090406.; Working table dimensions 4180 x 1100 mm. Power supply 380 V.

ACCUTEX AU-500iA wire EDM was built in 2007 in Taiwan by ACCUTEX TECHNOLOGIES CO., LTD. The machine uses advanced electrical erosion technology for precise, 5-axis machining of workpieces with a maximum weight of 400 kg. This method enables difficult shapes to be achieved in even the hardest materials. The need for other secondary processes, such as polishing, is also minimised or completely eliminated. All this makes the offered AU-500iA wire EDM machine the best choice for the production of e.g. dies, tools and punches. The total weight of the machine is approximately 3500 kg. Technical specifications of the ACCUTEX AU-500iA wire EDM - CNC controller - number of axes: 5 (X,Y,Z,U,V) - feed in the X/Y/Z axis: 500/300/300 mm - feed in the U/V axis: 100/100 mm - maximum workpiece weight: 400 kg - maximum workpiece dimensions (L x W x H): 990 x 560 x 295 mm - cutting angle: ±22.5 ...

MITUTOYO Crysta Apex CRT-A910 coordinate measuring machine was built in Japan by Mitutoyo Corporation. This extremely advanced machine, characterised by the highest accuracy and objectivity, is used for highly accurate workpiece measurements. Workpiece measurements are performed using the contact or non-contact method, which are then represented as a set of coordinate points. The use of this method makes it possible to measure parts with very complex shapes, which cannot be measured with ordinary measuring instruments. The MITUTOYO Crysta Apex CMM measuring machine is offered with a PC with software. Technical specifications of the MITUTOYO Crysta Apex CRT-A910 measuring machine - measuring range in the X/Y/Z axis: 900/1000/800 mm - measuring resolution: 0.1 µm - measuring speed: 300 mm/s - PC with software - compressed air pressure: 0.4 MPa - compressed air consumption: 50 l/m ...

VLB GROUP ECO 92 NC2 tube bending machine was built in 2022 in Portugal by the VLB Group. The machine has only undergone a test run and has not been used in production conditions. The machine is used for precision bending of tubes and profiles with a maximum diameter of 92 mm. All machining parameters are programmed in an advanced industrial controller with a touchscreen. It allows precise basic movements, i.e. bending angle (Y axis) and tube rotation (Z axis), to be performed fully electrically. The distance between bends (X axis) is, in turn, precisely set using mechanical stops. Thanks to the technical solutions used, the offered ECO 92 NC2 mandrel bending machine is the perfect choice for high-quality workpiece bending in small and medium series. The total weight of the machine is 2420 kg. Technical specifications of the VLB GROUP ECO 92 NC2 tube and profile bending machine -  ...

REMS MAGNUM 4010 LT pipe threading machine was built in 2020 in Germany by REMS GmbH & Co KG. This extremely versatile tool is designed for threading all kinds of pipe and bolt threads. The clamping chuck used prevents material slippage during machining, making the process very stable. The large distance between the clamping chuck and the centring chuck, in turn, allows long pipes to be clamped securely. After machining, the edges of the material are smoothed by an internal deburring device with two blades. The MAGNUM 4010 LT pipe threader on offer weighs approximately 80 kg. Technical specifications of the REMS MAGNUM 4010 LT pipe threading machine - thread types: R, NPT, G, NPSM, Pg, M, UNC, BSW - pipe thread diameter: 16-63 mm / ½ – 4″ - bolt thread diameter: 18-60 mm / ½ – 2″ - pipe thread length (cylindrical): 150 mm - bolt thread length: unlimited - spindle rotat ...

GM-SB-38CNC-2A1S tube bending machine was built in 2019 in China by ZHANGJIAGANG KING-MACC MACHINERY MANUFACTURING CO., LTD. The machine, distinguished by its high precision and ease of operation, is used for bending tubes and profiles with a maximum diameter of 38 mm. All process parameters, including even the most complex shapes, are programmed in an intuitive PLC controller with memory for up to 200 work programmes. Thanks to the high degree of automation, the offered GM-SB-38CNC mandrel bending machine is an indispensable tool in any production facility. The total weight of the machine is approximately 1500 kg. Technical specifications of the GM-SB-38CNC-2A1S tube and profile bending machine - operator panel with PLC controller - bending capacity: ⌀ 38×2 mm - maximum bending angle: 180° - maximum bending radius: 200 mm - minimum bending radius: 20 mm - mandrel length: 32 ...

LS6/4 knotted mesh production machine was built in 2006 in Poland by Maszyny S.C. The machine enables the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. Technical specifications of the LS6/4 fixed knot fence production line - type of produced net: L, M, S, SL - maximum height of the produced net: 200 cm - vertical wires spacing: 15 or 30 cm - number of horizontal wires: 25 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa

LS8 2500 knotted mesh production machine was built in 2016 in Poland by Maszyny S.C. The machine is used in the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. The fixed knot fence production line weighs 2600 kg. Technical specifications of the LS8 2500 knotted mesh production machine - type of produced net : L, M, S, SL - maximum height of the produced net: 225 cm - horizontal wires spacing: 15 or 30 cm - number of horizontal wires: 26 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa - power: 11 kW - pneumatic pressure: 0.6 MPa - power supply: 3x 400 V; 50 Hz  ...

GEKA HYDRACROP 55 SD hydraulic ironworker machine was built in 2015 in Spain. The machine is equipped with 5 work stations for precise hole and corner punching, as well as shearing flat bars, angle bars and solid bars. Each work station is controlled by two hydraulic cylinders, which give the possibility to work independently or in parallel on two stations simultaneously. Thanks to its versatility and multifunctionality, the offered GEKA HYD 55 ironworker machine is the perfect choice for a significant increase of productivity in any production facility. The total weight of the machine is 1750 kg. The offer also includes an additional, optional work table with a value of EUR 2000. Technical specifications of the GEKA HYDRACROP 55 SD 2-cylinder ironworker machine General data - punching force: 55 t - cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinde ...

HEXAGON ROMER ABSOLUTE ARM RA-7525-3 coordinate measuring arm was built in 2014 in France by Hexagon Metrology. The device is used for the precise 3D measurement of complex parts, which are usually inspected on complex metrology devices. The process, thanks to the use of absolute encoders, is performed immediately. Simply switch on the arm and start measuring. What’s more, the universal mount allows the change of measuring probes at any time, without the need to recalibrate. The Zero G counterbalance minimises torque in the base of the device, increasing freedom in mounting options, i.e. lightweight tripods, magnetic and vacuum bases. This solution, combined with immediate acoustic and haptic feedback to the operator, allows the machine to be used in even the most demanding industrial environments. When the HEXAGON portable measuring arm is not in use, it can be locked safely in the ...

MACRI ITALIA PROVAR 6-45 U-D tube and profile bending machine was built in 2015 in Italy by Macri Italia srl. The machine, designed for precision bending of tubes and profiles with a maximum diameter of 45 mm, is an answer to the daily challenges of modern business. The machining process is performed by means of a moving head with reinforced gears, which allows the bending of standard and variable radiuses in 6 axes (X,Y,Z,B1,B2,A). Each axis, in turn, is driven by brushless servomotors, which ensure the achievement of high dynamics, combined with excellent positioning accuracy. The machine’s extensive range of equipment includes e.g. state-of-the-art MACRI software with many useful functions and the ability to run a anti-collision test with 3D simulation. The PROVAR 6-45 U-D mandrel bending machine weighs 4000 kg. Technical specifications of the MACRI ITALIA PROVAR 6-45 U-D tube be ...

WAFIOS CNC winding and bending machine Type FTU5.3-98 Year of manuf. 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm WAFIOS CNC winding and bending machine Type FTU5.3-98 Built in 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm

Genesis IPG Type YLR-1500-WC Spavarka laserowa Numer seryjny: PLMP32200563 Data produkcji: 2022 Moc lasera: 1.5kW BOFA AD2000-IQ Wyciąg oparów Numer seryjny: 50171178001 Data produkcji: 2022 Computer: Dell Precision 5820 IPG LC71.01-A.4.5/6 Agregat chłodniczy Numer seryjny: PC220200019 Numer katalogowy IPGP: CCH71A11UXXDEXU Data produkcji: 2022 Zasilanie: 400/480 V, 3-fazowe, 50/60 Hz Zabezpieczenie nadprądowe: 30 A / Type 1 Znamionowy prąd pełnego obciążenia: 16/17 A Prąd silnika: 5.5 A Chłodziwo: R407-C, 2.2 kg Wydajność chłodzenia: 5.5 / 5.9 kW Ciśnienie maksymalne robocze: 30 bar Schemat elektryczny: P35-001221 Odporność zwarciowa: 50 kA Panel sterowania

GALACTIC GAVA 500 CAPVD PVD sputtering machine was built in 2022 in Poland. This extremely technically advanced system is designed to coat, among others, cutting tools, moulds and punches with super-durable coatings with high resistance to abrasion and chemical agents. The CAPVD (Cathodic Arc Physical Vapour Deposition) method used, compared to standard PVD methods, allows highly dense and adherent coatings to be produced with good deposition rates and thicknesses (± 5 nm). In the process, atoms from a source (cathode) placed in the working chamber are vaporised using an electric arc. These atoms then transfer and deposit onto the surface of the workpieces, creating a thin coating. The GAVA 500 PVD sputtering machine is equipped with all the necessary components of the best technical specifications and meets the highest industry standards. Technical specifications of the GALACTIC  ...

Key data: 1140 °C

Continious Brazing/Sintering furnace manufactured by Mahler. Type: Humpback (lower H2 consumption). Belt width: 450mm Clearance above belt: 200 mm Heating length: 5000mm Gross throughput: 600 kg/h Electric heating power: 198 kW Service temperature: 1140 Adjustable range of belt speed: 100-1000 mm/min Temperature cotroul groups: 5x Total length: 30m width: 1,8m height: 2,8m Hydrogen connection: 0,1bar 30Nm3/h (type 3.0) Nitrogen connection: 0,1 bar 60 Nm3/h (type 5.0) Exhaust gas : 300 m3/h Furnace is in use, and was regularly serviced. In 12. 2024 brick lining, heating elements, thermocouples, mesh belt and muffle was replaced . Spare parts are available, in case of interest, can be subject of seperate agreement. Offer includes: - Water cooling system with glicol base heat exchanger - Exhaust tubes (2x around 5m Stainless steel) - 5x sensor system to detect ex ...

WWM TS 560/8-1 wire drawing machine was built in 2014 in Italy by WWM Technology Srl (now EJP Italmec Sp. z o.o.). The machine is used in the process of reducing the diameter of various types of wire by pulling it through a series of rollers. Once reduced to the appropriate diameter, the wire is confectioned directly onto a carousel or stand. The wire drawing line consists of the following machines: 1. WWM TS 560/8-1 wire drawing machine 2. WWM SV5 vertical static wire pay-off 3. WWM DSM 01 mechanical descaler 4. WWM AF 1000 wire coiler Wire feeding precision is ensured by the WWM wire pay-off, which consists of two tilting drums and a central column. It enables easy loading of material coils weighing a maximum of 3000 kg each, without stopping the drawing machine. During threading, the sheave and basket are lowered by a hoist with AC motor. The scale on the entire surface of t ...

ITALMEC TSR 300/1+6 wire drawing line was built in 2020 in Poland by EJP Italmec Sp. z o.o. The purpose of the line is to reduce the diameter of various types of wire, i.e. steel wire or welding wire, by pulling it through a series of rollers. This process is performed fully automatically, thanks to the use of two additional devices – a wire pay-off and a wire coiler. The wire drawing line consists of the following parts: 1. ITALMEC TSR 300/1+6 wire drawing machine 2. ITALMEC SB2C vertical static wire pay-off with compensator 3. ITALMEC AHSC 30 horizontal static wire coiler The ITALMEC wire pay-off with rotating arm precisely unwinds material from spools, coils or racks towards the drawing machine without stopping it. It is equipped with a special device that stops the machine in case of wire breakage and a compensator that accumulates the amount of wire necessary to stop the  ...

MAX CAPASITY 63 T, DIAMETER ROLLING 110

ADCOLE 1200 SH cylindrical coordinate measuring machine was built in 1990 in the United States by ADCOLE CORPORATION. The machine is used for measuring tight tolerances on camshafts, crankshafts and other cylindrical parts. The patented laser interferometer technology ensures the realisation of precise radial measurements with an accuracy of up to 0.5 μm. The ADCOLE Model 1200 coordinate measuring machine, including all components, weighs 5325 kg. Technical specifications of the ADCOLE 1200 SH crankshaft and camshaft measuring machine - machine dimensions (L x W x H): 1075 x 1195 x 2890 mm - peripheral table dimensions (L x W x H): 715 x 465 x 825 mm - control cabinet dimensions (L x W x H): 800 x 800 x 1800-2000 mm - machine weight: 3525 kg - total weight of the machine including all components: 5325 kg

GEKA HYDRACROP 55/S hydraulic ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.A. The machine, equipped with 5 work stations, is designed for precision machining of flat bars and angle bars. Each station is controlled by two hydraulic cylinders, which give the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55 S ironworker machine weighs 1390 kg. Technical specifications of the GEKA HYDRACROP 55/S ironworker machine General data - maximum punching force: 55 t - maximum cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of the GEKA HYDRACROP 55/S machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade length: 305 mm - working height: 880 mm Angle bar shearing station - shearing of angle bar at 90°: 12 ...

XG-25B industrial furnace is designed to heat a charge placed in an induction coil by means of high-frequency current. In this process, the AC current flowing through the primary coil generates an alternating magnetic field around the charge. This field in turn induces electromagnetic forces in the secondary circuit, resulting in the heating of the charge. This solution makes the XG-25B2 induction furnace much more efficient and economical than other furnaces available on the market. The main power and control components are IGBT and MOSFET components, which enable the unit to operate strictly within the required technical parameters. The offer also includes a water tank, water pump, table and foot switch controller. The electric induction furnace weighs just 26 kg. Technical specifications of the XG-25B furnace - input voltage: 380 V ± 10%; 50/60 Hz - input power: 5-25 kVA - outp ...

UF 150070301 MD PVD sputtering machine was built in 2015 in China by LONGKOU BITE VACCUM TECHNOLOGY CO., LTD. This extremely high-tech machine is used in the vacuum coating process. The technological vacuum combined with the high voltage inside a chamber causes the expulsion of metal atoms from the target (evaporation material), which are then deposited on the surface of the workpieces. Workpieces treated in this way are characterised by a ″metallic effect″ with high resistance to abrasion and chemical agents. The offered LKBT magnetron sputtering machine has the necessary equipment, i.e. a high-vacuum diffusion pump, compressor and RITTAL chiller. It is also possible to purchase new titanium targets (20 pcs.), chrome targets (4-5 pcs.) and TiAl alloy targets (3-6 pcs.) for an additional charge. The price for a single piece is 1200 PLN. Technical specifications of the UF 150070 ...

Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Strokes per minute: 270 Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Feed of manipulator A: 7.140 mm Feed of manipulator B: 9.940 mm Workpìece weight: 2500 kg Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

KUKA KR 150-2-TJ industrial robot was manufactured in 2001 in Germany by KUKA AG. This multifunctional machine is the ideal solution for automating industrial processes that require precise and reliable operation. Using the DeviceNet network protocol, it is possible to connect and configure the robot with any device, such as a conveyor gripper, welding head or plasma torch. Over the past few years, the KR 150/2 robot arm has undergone a full service and has been comprehensively prepared for operation. Some of the many overhaul works included a performance test of the inverters and motors, checking and adjusting the robot's gears, as well as replacing the batteries and the input/output module (Balluff) in the controller. Technical specifications of the KUKA KR 150-2-TJ robot - number of axes: 6 - 7-axis, 8-metre long track - controller: KUKA VKR C2 - portable teach pendant: KUKA ...

BLM DYNAM 3 CNC tube bending machine was built by BLM S.P.A. in Italy in 1999. Distinguished by its high productivity and bending accuracy, the machine is an indispensable tool in any production facility. The applied technical solutions and reliable components make it possible to perform fully automatic, serial bending of profiles and tubes with a maximum diameter of 60 mm. All process parameters are entered on an intuitive CNC controller with many functions that facilitate the programming of even the most complex shapes in just a few steps. Throughout its lifetime, the DYNAM 3 mandrel bending machine has been regularly serviced. The total weight of the machine is 5070 kg. Technical specifications of the BLM DYNAM 3 CNC tube and profile bending machine - CNC control system: BLM FNC 2000 R - maximum tube diameter: 60 mm - tool set for bending tubes Ø 25 mm - lubricant pump: FLENCO ...

KUKA KR 20 R1810-2 industrial robot was built in 2023 in Germany by KUKA AG. Purchased in December 2023, the machine is brand new, under manufacturer’s warranty and packed in the original boxes. The boxes have never been opened. This KUKA KR 20 R1810-2 6-axis robot, which is part of the KR CYBERTECH series, is used in the automation of processes such as workpiece machining, workpiece handling, assembly, palletising and welding. The machine is protected against uncontrolled electrostatic charging or discharging, making it also suitable for the safe handling of sensitive electronic components. Its slim design with an extremely robust arm with an increased range of movement ensures freedom of operation in all positions, even in hard-to-reach areas. Optimised controller structures offer smooth and precise travel, both on the track and during positioning. In addition, each of the 6 axes  ...